€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Inpection mirror 1-978
2 x	Vacum SAA 901
1 x	Earth wire with dummy Schunko-plug
1 x	6-piece TORX-screwdriver-set ESD
1 x	End side cutters EUROline-Conductive
1 x	Wood Lathe DB900
1 x	Super-Cut
1 x	6-piece screwdriver and cross-recess set ESD
1 x	Steel tape measure
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Earth wire
1 x	Cross-recess Screwdrivers 00
2 x	6-piece socket wrenches ESD
1 x	Wood Lathe DB450
1 x	Cross-recess Screwdrivers 000
1 x	6-piece wrench key set ESD
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	BIT-SET
1 x	Table Sawr TKS 315 E
1 x	Cross-recess Screwdrivers 0
1 x	Antiallergical Tweezers 5-121-1
1 x	Diamond blade for MBS 240/E
1 x	Earthing module
1 x	Cross-recess Screwdrivers Pozidriv 1
1 x	Cross-recess Screwdrivers 2
1 x	Tungsten Carbide Tipped (TCT)
1 x	Floor cover ESD
1 x	Cross-recess Screwdrivers 00
1 x	Cross-recess Screwdrivers 1
1 x	6-piece set of ESD/EGB tweezers
1 x	EPROM/Flash-PLCC32-2-DIL32 socket submodule
1 x	Antiallergical Tweezers 5-155-1
1 x	6-piece screwdriver and cross-recess set
1 x	EUROline-Conductive set of pliers
1 x	Table Saw TKS 2500 SC
1 x	Cross-recess Screwdrivers 1
1 x	Cross-recess Screwdrivers Pozidriv 2
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	surface planing and thicknessing ADH 200
1 x	6-piece screwdriver set ESD
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Cross-recess Screwdrivers 1
1 x	Cross-recess Screwdrivers 1
1 x	Antiallergical Tweezers 5-117-1
1 x	Earth wire
1 x	Round nose pliers 45º EUROline-Conductive
2 x	End side cutters 45º EUROline-Conductive
1 x	ACCENT SERVICE TOOLS SET
1 x	Blade for Wood and Plastics
1 x	surface planing and thicknessing ADH 250
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	6-piece TORX-screwdriver-set
1 x	Mini side cutters EUROline-Conductive
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Side cutters EUROline-Conductive
1 x	6-piece screwdriver and cross-recess set
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Ceramic tweezers 5-081
1 x	DIL40/MLF64 ZIF-CS AVR-1
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	BGA-Bottom-105
1 x	Beeprog2C
1 x	MICRO Miller FF 500
1 x	Conj 5 pinças ESD
1 x	BGA-Bottom-103
1 x	Micro Compound Table KT 70
1 x	PRECISION WIRE STRIPPER ESD-PLUS
1 x	ESD Brushe
2 x	Long neck angle milling/drilling unit LWB 220/E
1 x	BGA-0245/0242
1 x	BeeProg2
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x	Bench drill press TBH
1 x	MICROMOT 50/EF
1 x	BGA-Bottom-106
2 x	Professional Drill/Grinder IBS/E
2 x	MICRO Miller FF 230
1 x	Diamond-coated cutting disc for MIC
1 x	Machine Vice MS 4
1 x	ESD Tweezers 5-195
1 x	Round nose pliers 165mm
2 x	MICROMOT 50
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	FREEZER-TOP 200ml
1 x	DIL24/TSSOP24 ZIF 170mil
2 x	Precision drill grinder FBS 12/EF
2 x	MICROMOT 230/E
1 x	BGA-0246/0244
1 x	ESD Tweezers 5-191
1 x	BGA-0246/0243
1 x	BGA-0245/0243
1 x	Long neck straight drill/grinder LB/E
2 x	MICROMOT 50/E
1 x	Bench drill machine TBM 220
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	Chuck for TBM 220
1 x	ESD Tweezers 5-193
2 x	ESD Tweezers 5-194
1 x	Mill/Drill System BFW 40/E
1 x	Precision Drill/Grinder FBS 240/E
1 x	ESD Tweezers 5-192
1 x	ESD Brushe
1 x	BGA-Bottom-102
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	DIL44/MLF44-1 ZIF-CS

€17,256.92