€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Coarse-toothed (18 TPI per 25mm)
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
2 x	Blade holders for DS 460
1 x	Grinding mop cylinder grit 240
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Blade guides separately
2 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Blade for Wood and Plastics
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Bandsaw blade of bimetal for MBS 240/E
2 x	Coarse-toothed (10 TPI per 25mm)
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Diamond blade for MBS 240/E
2 x	Half round cutter 13mm
2 x	Fibre-Cut Discs
1 x	Fine dust paper filter for CW-matic
1 x	Felt cloth polishing disc (100 x 15mm)
2 x	Fibre-Cut Discs
3 x	Replacement cutting disc for MICRO cutter MIC
3 x	Edge cutter with pin 6.4mm
1 x	Inpection mirror 1-978
2 x	Fibre-Cut Discs
1 x	Felt polishers
1 x	Felt polishers
3 x	Core box bit 3.2mm
1 x	Spare cutting wire
3 x	Diamond-coated cutting disc for MIC
1 x	Felt polishers
2 x	Slot cutter 6.5mm
1 x	Fixed Steady
2 x	Slot cutter 5.0mm
2 x	Fibre-Cut Discs
2 x	Slot cutter 3.2mm
1 x	V-slot cutter 6.5mm
2 x	Felt polishers
2 x	Five piece HSS chisel set
1 x	Flame shaped milling cutters
1 x	Rounding over cutter 6.4mm
2 x	Fibre-Cut Discs
1 x	Drill chuck with sliding sleeve for the tailstock
2 x	Fibre-Cut Discs
1 x	Engraving tool GG
2 x	10-piece wood router cutter set
1 x	Router base OFV
1 x	Cylinder shaped milling cutters
1 x	Corundum fan sander for LWS
1 x	HSS twist drill set with centring pin
1 x	High quality corundum grinding bits
1 x	Flexible polishing pad set
2 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Replacement carving blades for MSG
1 x	Sanding bands 14x13mm
1 x	Corundum bound cutting disc for LWS
1 x	MICROMOT steel collet set
1 x	Collet chuck ER32 for D250X550
1 x	Corundum grinding disc for LWS
1 x	Replacement belts for BSL 220/E
1 x	Super-fine sanding discs grain 000
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Sanding Drums
1 x	Cotton polishers
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	High quality corundum grinding bits
1 x	Cutting disc, with reinforcement
1 x	Wolfram vanadium steel milling bits
1 x	MICROMOT drill stand MB 200
1 x	Tungsten carbide cutters set
1 x	High quality corundum grinding bits
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Cut off/mitre saw KGS 80
1 x	Conjunto de três brocas de ponto
1 x	Sanding Discs
1 x	Milling cutter set (2 - 5mm)
1 x	Crosscut 'Super-Cut' blade
1 x	High quality corundum grinding bits
1 x	Replacement belts for BSL 220/E
1 x	Collet Set for accurate use on round components
1 x	Sanding Drums
1 x	High quality corundum grinding bits
1 x	Cotton polishers
1 x	Corundum grinding disc for LWS
1 x	Corundum sanding discs for LWS
2 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Corundum sanding discs for LWS
1 x	Cotton polishers
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	HSS twist drill set to DIN 338
1 x	Wolfram vanadium steel milling bits
1 x	DIL48/TQFP64 ZIF HC908-1
1 x	Lathe tools 10mm pastilhados
1 x	Precision Drill/Grinder FBS 240/E
1 x	DIL40/TQFP64 ZIF CC-1
1 x	MICROMOT 50/EF
1 x	DIL40/TQFP64 ZIF EM652X
2 x	MICROMOT 50
1 x	DIL40/TQFP44 ZIF PIC-1
1 x	SmartProg2
1 x	DIL48/TQFP48-1 ZIF
1 x	Precision drill grinder FBS 12/EF
2 x	Long neck angle milling/drilling unit LWB 220/E
1 x	DIL40/TQFP44 ZIF AWM-1
1 x	DIL48/TQFP100 ZIF PLD-2
1 x	Bench drill press TBH
1 x	DIL44/TQFP44-2 ZIF
1 x	DIL24/QSOP24 ZIF 150mil
1 x	DIL44/TQFP44-3 ZIF
1 x	BeeProg2
1 x	DIL44/TQFP44-1 Zif
1 x	Bench drill machine TBM 220
1 x	DIL40/TQFP80-1 ZIF AWM-1
1 x	MICRO Miller MF 70
1 x	quantum revolving center CM2
1 x	DIL48/TQFP100 ZIF ST92Fxxx
1 x	MICRO Miller FF 500
1 x	DIL40/TQFP64 ZIF AVRmega-2
1 x	Professional Drill/Grinder IBS/E
1 x	DIL40/TQFP52 ZIF EM652X
1 x	Mill/Drill System BFW 40/E
1 x	Beeprog2C

€10,494.70