€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

3 x	Backing disc for LWS
2 x	Angle cutter 45 °
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Bench drill press TBH
2 x	10-piece wood router cutter set
1 x	PRECISION WIRE STRIPPER ESD-PLUS
1 x	6-piece socket wrenches ESD
1 x	PLCC Puller
1 x	Belt sander BBS/S
1 x	Round nose pliers 45º EUROline-Conductive
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	Aluminium Die-Cast
1 x	PLCC Extractor
1 x	Three jaw chuck for the lathe DB 250
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Ball-shaped diamond coated 3.2mm
1 x	14-piece parallel supports set
1 x	Bench drill machine TBM 220
1 x	Universal polishing paste
1 x	2-speed scroll saw DSH
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Silicon-Carbide.
1 x	Special Fused Alumina (Hardness N).
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Ball-shaped diamond coated 1.2mm
1 x	Five piece HSS chisel set
2 x	Tungsten Carbide Tipped (TCT)
1 x	Plastic magnifying glass
1 x	Belt sander BS/E
1 x	Mini side cutters EUROline-Conductive
1 x	Angle polisher WP/E
1 x	Cutting disc, with reinforcement
2 x
1 x	sanding belts for BBS/s Grit 80
1 x	Precision caliper square
1 x	Ball shaped milling cutters
1 x	6-piece TORX-screwdriver-set ESD
1 x	6-piece screwdriver and cross-recess set ESD
1 x	Ball-shaped diamond coated 2.2mm
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	sanding belts for BBS/s Grit 150
1 x	Blade for Steel and brass
1 x	sanding belts for BBS/s Grit 240
1 x	Bench Circular Saw KS 230
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Independent four jaw chuck for the DB 250
1 x	Polishing Set
1 x	Blade holders for DS 460
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Core box bit 3.2mm
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Slot cutter 6.5mm
1 x	V-slot cutter 6.5mm
1 x	ESD Tweezers 5-195
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Slot cutter 5.0mm
1 x	Combi cutter 6.5/2.5mm
1 x	End side cutters EUROline-Conductive
1 x	Screwdriver 1.8
1 x	Self-adhesive white corundum sanding discs for TG 125/E
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	ESD Tweezers 5-193
1 x	ESD Tweezers 5-194
1 x	Half round cutter 13mm
1 x	Rounding over cutter 6.4mm
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	ESD Tweezers 5-191
1 x	Diamond Coated
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Coarse-toothed (25 TPI per 25mm)
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Edge cutter with pin 6.4mm
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	ESD-handling set
1 x	ESD Tweezers 5-192
1 x	Slot cutter 3.2mm
1 x	ESD Brushe
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Rebating cutter 6.4mm
1 x	ESD-handling ser 9-361
1 x	Super-Cut
1 x	Grinding mop cylinder grit 80
1 x	Inspector mirror
1 x	Microfibre cloth
1 x	Fixed Steady
1 x	Sanding fleece for LWS
1 x	Replacement glue sticks for HKP 220
1 x	Tungstein carbide rasp - and cutting disc
1 x	Diamond-coated cutting and roughing disc
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Grinding mop cylinder grit 120
1 x	Four Jaw Chuck
1 x	Polishing felt, medium hard
1 x	Floor cover ESD
1 x	EUROline-Conductive set of pliers
1 x	Corundum sanding discs for LWS
1 x	Collet Set for accurate use on round components
1 x	Tool holder for rotary tools
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Super-fine sanding discs grain 000
1 x	Chuck for TBM 220
1 x	Hand magnifier with LED light 3X
1 x	Corundum grinding disc for LWS
2 x	Mini side cutters EUROline-Conductive
1 x	Glass fibre contact cleaner brush
1 x	Professional polishing sponge
1 x	Mini side cutters EUROline-Conductive
1 x	Lambswool polishing disc
1 x	Grinding mop cylinder grit 120
1 x	Micro Compound Table KT 70
1 x	Glass fibre contact cleaner brush
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Corundum bound cutting disc for LWS
1 x	Professional set for finish grinding and polishing
1 x	Sanding fleece for LWS
1 x	Inpection mirror 1-978
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Centre Turning Attachment
1 x	Grinding mop cylinder grit 240
1 x	Corundum fan sander for LWS
1 x	Corundum fan sander for LWS
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	Footswitch FS
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Corundum sanding discs for LWS
1 x	Hand Magnifier 2-293
1 x	Super-fine sanding discs grain 2000
1 x	Corundum grinding disc for LWS
1 x	Socket Wrenches 3.2
1 x	Spare cutting wire
1 x	Gear Chuck
1 x	IC tweezers
1 x	HSS immersion saw blades for OZI
1 x	Replacement belts for BSL 220/E
1 x	Jig saw blades made of HSS
1 x	Diamond blade
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Precision steel vice PM 40
1 x	Sanding pads for OZI 220/E grit 80
1 x	Machine Vice MS 4
1 x	HSS cutting blade for OZI
1 x	HSS immersion saw blades for OZI
1 x	Tungsten carbide cutters set
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Replacement belts for BSL 220/E
1 x	sandpaper for PS 13 Grot 180
1 x	Crosscut 'Super-Cut' blade
1 x	Sanding pads for OZI 220/E grit 240
1 x	Diamond cutting blade for OZI
1 x	sandpaper for PS 13 Grit 240
1 x	sandpaper for PS 13 Grit 400
1 x	Solid carbide saw blade
1 x	Supercut jig saw blades of special steel
1 x	Step clamps made of steel
1 x	Sanding pads for OZI 220/E grit 150
1 x	Replacement belts for BSL 220/E
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Replacement belts for BSL 220/E
1 x	Tungsten tipped saw blade
1 x	Diamond-coated cutting disc for MIC
1 x	BGA-Bottom-108
1 x	Lathe tools 10mm pastilhados
1 x	BGA-Bottom-115
1 x	BGA-0245/0242
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4

€5,751.25