€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Wood Lathe DB900
1 x	Table Saw TKS 2500 SC
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Wood Lathe DB450
1 x	Table Sawr TKS 315 E
2 x	Grinding mop cylinder grit 120
1 x	Jig saw STS 12/E
1 x	Super-fine sanding discs grain 000
3 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Grinding mop cylinder grit 80
1 x	Corundum fan sander for LWS
1 x	Grinding mop cylinder grit 240
2 x	Core box bit 3.2mm
1 x	Grinding mop cylinder grit 120
1 x	Diamond-coated cutting and roughing disc
3 x	Self-adhesive white corundum sanding discs for TG 250/E
2 x	Slot cutter 3.2mm
3 x	Self-adhesive white corundum sanding discs for TG 250/E
2 x	Professional set for finish grinding and polishing
1 x	Tungstein carbide rasp - and cutting disc
1 x	Broca de ponto 3.15 x 1.25
2 x	Hot wire cutter THERMOCUT 650
1 x	magnetic base 80kg
1 x	SCLCR1010E06
3 x	Tungsten Carbide Tipped (TCT)
1 x	sclcr2525M12
1 x	Crosscut 'Super-Cut' blade
2 x	Insert CCGT120404-AK
2 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Diamond blade
1 x	BIT-SET
3 x	Diamond-coated cutting disc for MIC
1 x	broca de alta duração de 0,2mm
3 x	Replacement cutting disc for MICRO cutter MIC
2 x	Insert CCGT060202-AK
1 x	Solid carbide saw blade
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Combi cutter 6.5/2.5mm
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Edge cutter with pin 6.4mm
1 x	V-slot cutter 6.5mm
1 x	Rounding over cutter 6.4mm
1 x	Super-Cut
1 x	Half round cutter 13mm
1 x	Slot cutter 5.0mm
1 x	DIL32/PLCC32 ZIF-CS NOR-1
1 x	Round nose pliers 45º EUROline-Conductive
1 x	DIL40/PLCC52 ZIF MCS51-2
1 x	DIL40/PLCC28 ZIF AWM-1
1 x	DIL32/PLCC32 ZIF
1 x	DIL28/PLCC84 ZIF HS538ESC01H
1 x	DIL40/PLCC44 ZIF W-EPROM / MCS51
1 x	DIL40/PLCC44 ZIF PIC-1
1 x	DIL40/PLCC68 ZIF AWM-1
2 x	Mini side cutters EUROline-Conductive
1 x	DIL28/TSSOP28 ZIF 170mil
1 x	Mini side cutters EUROline-Conductive
1 x	DIL28/PLCC32 ZIF EPROM
1 x	DIL40/PLCC44 ZIF AWM-1
1 x	End side cutters 45º EUROline-Conductive
1 x	DIL20W/PLCC20 ZIF
1 x	DIL40/PLCC68 ZIF DS87C550
1 x	DIL40/PLCC52 ZIF DS87C530
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	DIL28/PLCC28 ZIF
2 x	Pinça SOIC de 8 pinos
1 x	DIL20/PLCC20 ZIF-CS
1 x	DIL40/PLCC52 ZIF AWM-1
1 x	End side cutters EUROline-Conductive
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	DCGT 070202F-AL
1 x	DIL28/PLCC28 ZIF-CS
1 x	DIL40/PLCC52 ZIF AWM-2
1 x	Side cutters EUROline-Conductive
1 x	DIL32/PLCC84 ZIF HS3334ESCF1H
1 x	DIL24/TSSOP24 ZIF 170mil
1 x	DIL32/PLCC32 ZIF-CS
1 x	BGA-Bottom-108
1 x	BGA-Bottom-11
1 x	BGA-Bottom-10
1 x	DIL42/SDIP42 ZIF 600mil
1 x	BGA-Bottom-125
1 x	BGA-0246/0243
1 x	BGA-Bottom-1
1 x	BGA-0245/0241
2 x	TU 2004V
1 x	DIL40/VQFP64 ZIF AWM-1
1 x	6-piece TORX-screwdriver-set ESD
1 x	BGA-0245/0243
1 x	BGA-Bottom-118
1 x	BGA-0246/0244
1 x	BGA-Bottom-101
1 x	BGA-Bottom-105
1 x	BGA-Bottom-102
1 x	BGA-Bottom-115
1 x	DIL40/SDIP52 ZIF 55x
1 x	Bottom PSOP44 NOR-3
1 x	DIL48/LQFP64 ZIF M16C/Tiny
1 x	BeeHive208S
1 x	BGA-Bottom-111
1 x	DIL32/SDIP32 ZIF 400mil
1 x	DIL48/SDIP56 ZIF 68HC05Bx

€21,871.91