€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Manufacturers

Information

2 x	Precision steel vice PM 40
1 x	MICRO cutter MIC
1 x	Tungsten Carbide Tipped (TCT)
1 x	Table Saw FET
1 x	2-speed scroll saw DSH
1 x	Broca de ponto 3.15 x 1.25
1 x	Precision Vice FMS 75
1 x	Corundum bound cutting disc for LWS
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Thicknesser DH 40
1 x	Surface planer AH 80
1 x	Corundum grinding disc for LWS
1 x	Bench Circular Saw KS 230
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Broca de ponto 5.00 x 2.00
1 x	TIP SPT-2
1 x	Multipurpose Vices Primus 75
1 x	MICRO Band Saw MBS 240/E
1 x	Corundum sanding discs for LWS
1 x	Corundum grinding disc for LWS
1 x	Precision Vice FMZ
1 x	High quality corundum grinding bits
1 x	Broca de alta duração de 2.0mm
1 x	EUROline end cutter
1 x	Diamond-coated cutting and roughing disc
1 x	TIP SPT-10
1 x	Beeprog2C
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	Multipurpose Vices Primus100
1 x	TIP SPT-9
1 x	Grinding mop cylinder grit 120
1 x	Super jig saw STS/E
1 x	MICRO woodturning lathe DB 250
1 x	Flexible silicon discs
1 x	Universal polishing paste
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Solid carbide stylus for engraving
1 x	BGA-Bottom-11
1 x	Flexible silicon discs
1 x	BGA-Bottom-106
1 x	Five piece HSS chisel set
1 x	Tungsten carbide cutter 1.0mm
1 x	Polishing paste
1 x	Broca de alta duração de 0.3mm
1 x	Cotton polishers
1 x	Broca de ponto 8.00 x 3.15
1 x	BGA-Bottom-103
1 x	Independent four jaw chuck for the DB 250
1 x	Felt polishers
1 x	BGA-Bottom-101
1 x	Felt polishers

€4,063.48