€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	surface planing and thicknessing ADH 200
1 x	Wood Lathe DB450
1 x	surface planing and thicknessing ADH 250
1 x	Angle cutter 45 °
1 x	Magnetic base
1 x	Tool holder type D for SWH 1-A
1 x	Diamond Grinding Bits 1mm
2 x	Morse taper MT3 - B16
1 x	6-piece set of ESD/EGB tweezers
1 x	Tungstein carbide rasp - and cutting disc
1 x	Stainless steel cups
1 x	Stainless steel brushes
1 x	ESD Tweezers 5-193
1 x	Ceramic-tipped tweezers and ESD 5-095
1 x	Diamond Twist Drills
2 x	Precision quick-action drill chuck 0-10mm B16
1 x	Corundum fan sander for LWS
1 x	lathe tools 10mm
1 x	Corundum grinding disc for LWS
1 x	Brass brushes
1 x	Tool holder type H for SWH 1-A
1 x	centrically clamping 125mm
1 x	ESD Tweezers 5-195
1 x	Blade for Wood and Plastics
1 x	Table Saw TKS 2500 SC
1 x	Ceramic-tipped tweezers and ESD 5-096
2 x	quantum revolving center CM2
1 x	Corundum sanding discs for LWS
1 x	Diamond Cutting Discs
1 x	Diamond Grinding Bits 5mm
1 x	Ball-shaped diamond coated 1.2mm
1 x	Diamond Cutting Discs
1 x	Steel cups
1 x	ESD Tweezers 5-194
1 x	Cutting tool 10 mm
1 x	Collet chuck ER32 for D250X550
1 x	Sanding fleece for LWS
1 x	Slot cutter 3.2mm
1 x	SCREEN 200ml
1 x	Quick-action tool holder kit SWH AA
2 x	4-jaw chuck individually clamping 125mm
1 x	V-slot cutter 6.5mm
1 x	Ball-shaped diamond coated 3.2mm
1 x	Core box bit 3.2mm
1 x	Slot cutter 6.5mm
1 x	Cups brushes
2 x	Cross-recess Screwdrivers Pozidriv 2
1 x	Lathe chuck flange for D250X550
1 x	Table Sawr TKS 315 E
1 x	Diamond Grinding Bits 1,8mm
1 x	Ball-shaped diamond coated 2.2mm
1 x	Face clamping disc for D250X550
1 x	Edge cutter with pin 6.4mm
1 x	Diamond Grinding Bits 1,8mm
1 x	Diamond Cutting Discs
1 x	Corundum fan sander for LWS
1 x	Super safety and specialty bit set, 75-piece
1 x	Morse taper MT2 - B16
1 x	Slot cutter 5.0mm
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
2 x	Precision quick-action drill chuck 0-13mm B16
1 x	Corundum bound cutting disc for LWS
1 x	ESD Tweezers 5-192
1 x	Steel wheels
1 x	Steady rest for D250X550
1 x	Screwdriver bit set. 49-piece.
1 x	Steel brushes
1 x	Conj 5 pinças ESD
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Set of precision cutters
1 x	Backing disc for LWS
1 x	Lathe System PD 400
1 x	Disc cutters
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	CM2 - B16 - M10
1 x	High quality corundum grinding bits
1 x	Wolfram vanadium steel milling bits
2 x	MICROMOT glue gun HKP 220
1 x	Universal holder UHZ
1 x	Engraving tool GG
2 x	MICROFLAM gas soldering set MGS
1 x	Solid carbide stylus for engraving
1 x	Polishing Set
1 x	High quality corundum grinding bits
1 x	Brass contact cleaner brush
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x	3-jaw chuck centrically clamping 80mm
1 x	Ball shaped milling cutters
1 x	MICRO-screwdrivers
1 x	3-jaw chuck centrically clamping 100mm
1 x	ESD-handling ser 9-361
2 x	MICRO Heat gun MH 550
1 x	Diamond-coated cutting and roughing disc
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	centrically clamping 100mm
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Titan Tweezers 5-037
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Cylindrical cutters
1 x	Tungsten carbide cutter 2.0mm
1 x	Precision magnetic gauge stand
1 x	Component tweezers 5-013
1 x	Set of special steel cutters
1 x	Flame shaped milling cutters
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	4-jaw chuck individually clamping 100mm
1 x	Professional Drill/Grinder IBS/E
1 x	Precision quick-action drill chuck 0-8mm B16
1 x	High quality corundum grinding bits
2 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	quantum revolving center CM1
1 x	Solid carbide stylus for engraving
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	ESD-handling set
1 x	Cone shaped milling cutter
1 x	Precision quick-action drill chuck 0-16mm B16
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Revolving center with replacement lathe centers
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	3-jaw chuck centrically clamping 125mm
1 x	MICROFLAME burner MFB/E
1 x	Cylinder sander WAS/E
1 x	4-jaw chuck individually clamping 80mm
1 x	broca de alta duração de 0,6mm
1 x	BGA-Bottom-1
1 x	Conjunto de três brocas de ponto
1 x	Saw blade made of high-alloy special steel
1 x	Antiallergical Tweezers 5-107-1
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	BGA-0245/0243
1 x	BGA-Bottom-102

€11,273.91