€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

1 x	BeeHive208S
1 x	Half round cutter 13mm
1 x	Fibre-Cut Discs
1 x	Flexishaft MICROMOT 110/BF
1 x	Flexible polishing pad set
1 x	Felt polishers
2 x	Felt cloth polishing disc (100 x 15mm)
1 x	Felt polishers
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Fine dust paper filter for CW-matic
1 x	Grinding mop cylinder grit 120
1 x	Flexishaft MICROMOT 110/P
1 x	Tungsten carbide cutters set
1 x	Broca de alta duração de 2.8mm
1 x	Flap Wheels
1 x	Grinding mop cylinder grit 240
2 x	Engraving tool GG
1 x	Fibre-Cut Discs
1 x	Edge cutter with pin 6.4mm
1 x	Dividing attachment TA 230 for PF 250
1 x	Grinding mop cylinder grit 120
1 x	Grinding mop cylinder grit 80
1 x	Flexible silicon discs
1 x	Fluted filter for CW-matic
1 x	Four Jaw Chuck
1 x	Felt polishers
1 x	Fixed Steady
2 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Milling cutter set (6 - 10mm)
1 x	Flexible polishing pad set
1 x	Fibre-Cut Discs
1 x	End milling cutter kit HSS 20 pcs
1 x	Grinding and Polishing Machine SP/E
1 x	High quality corundum grinding bits
1 x	Tungsten Carbide Tipped (TCT)
1 x	Flap Wheels
1 x	BGA-Bottom-101
1 x	HSS immersion saw blades for OZI
1 x	BGA-Bottom-10
1 x	BGA-0245/0243
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	BGA-Bottom-105
1 x	BGA-Bottom-106
1 x	BGA-0245/0242
1 x	Cutter head for copy and surface milling MT3
1 x
1 x	4-jaw chuck individually clamping 80mm
1 x	DCMT070204
1 x	3-jaw chuck centrically clamping 160mm
1 x	3-jaw chuck centrically clamping 100mm
1 x	BeeProg2
1 x	Cutting tool 16 mm
1 x	3-jaw chuck centrically clamping 125mm
1 x	CM2 - B16 - M10
1 x	BGA-Bottom-111
1 x	3-jaw chuck centrically clamping 80mm
1 x	BGA-0246/0244
1 x	BGA-Bottom-115
1 x	4-jaw chuck individually clamping 100mm
1 x	Cutting tool 10 mm
1 x	BGA-0245/0241
1 x	Dial gauge
1 x	BGA-Bottom-1
1 x	Cutting disc, with reinforcement
1 x	Cutter head for copy and surface milling MT2
1 x	Super safety and specialty bit set, 75-piece

€13,381.66