€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Manufacturers

Information

2 x	Hand magnifier with LED light 3X
2 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	Hand Magnifier 2-293
1 x	ESD Brushe
1 x	Steel brushes
1 x	Fibre-Cut Discs
1 x	Blade holders for DS 460
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	Angle cutter 45 °
1 x	Sanding bands 14x13mm
1 x	High quality corundum grinding bits
1 x	Brass brushes
1 x	Wheels brushes
1 x	Stainless steel cups
1 x	Steel cups
1 x	Stainless steel brushes
1 x	Compact workshop vacuum cleaner CW-matic
2 x	TOP-PIN 200ml
4 x	MULTI 200ml
1 x	SPRAYFLON 200ml
1 x	Wood Lathe DB450
1 x	sanding belts for BBS/s Grit 80
2 x	PROLUB 200ml
1 x	Table Sawr TKS 315 E
2 x	SPRAYOIL 200ml
2 x	PROTECTION 200ml
1 x	Flexible polishing pad set
1 x	Fluted filter for CW-matic
1 x	Fine dust paper filter for CW-matic
1 x	Flexible silicon discs
1 x	Flexible silicon discs
1 x	Flexible silicon discs
1 x	PRINTER 200ml
1 x	Hot wire cutter THERMOCUT 650
1 x	Insert CCGT120404-AK
1 x	Broca de ponto 3.15 x 1.25
1 x	sclcr2525M12
1 x	SCLCR1010E06
1 x	magnetic base 80kg
1 x	BIT-SET
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	TIP SPT-4
1 x	Antiallergical Tweezers 5-121-1
1 x	6-piece set of ESD/EGB tweezers
1 x	Antiallergical Tweezers 5-117-1
1 x	Broca de alta duração de 2.4mm
1 x	Lathe System PD 400
1 x	BGA-Bottom-103
1 x	BGA-Bottom-102
1 x	Cylinder sander WAS/E
1 x	BGA-0245/0241
1 x	BGA-0245/0242
1 x	BeeHive208S
1 x	BGA-Bottom-118
1 x	BGA-Bottom-111

€11,783.00