€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Ceramic tweezers 5-081
2 x	Corundum grinding disc for LWS
1 x	Corundum fan sander for LWS
1 x	Broca de alta duração de 2.8mm
2 x	6-piece screwdriver and cross-recess set ESD
2 x	6-piece screwdriver and cross-recess set
1 x	sandpaper for PS 13 Grot 180
1 x	Sanding bands 14x13mm
1 x	Sanding fleece for LWS
2 x	Antiallergical Tweezers 5-121-1
1 x	Backing disc for LWS
2 x	Antiallergical Tweezers 5-117-1
2 x	6-piece screwdriver and cross-recess set
2 x	Corundum grinding disc for LWS
2 x	6-piece socket wrenches ESD
2 x	6-piece TORX-screwdriver-set
1 x	6-piece set of ESD/EGB tweezers
1 x	Diamond-coated cutting and roughing disc
2 x	Antiallergical Tweezers 5-107-1
1 x	Sanding fleece for LWS
2 x	Antiallergical Tweezers 5-125-1
2 x	6pcs Double Open End wrench set
2 x	Antiallergical Tweezers 5-155-1
1 x	Corundum sanding discs for LWS
1 x	Cutting disc, with reinforcement
1 x	Tungstein carbide rasp - and cutting disc
1 x	Corundum sanding discs for LWS
2 x	ACCENT SERVICE TOOLS SET
4 x	Digital caliper gauge 300 mm
2 x	Rebating cutter 6.4mm
1 x	Magnetic base
1 x	Solid carbide stylus for engraving
1 x	Set of special steel cutters
1 x	Disc cutters
1 x	Precision caliper 500mm
1 x	High quality corundum grinding bits
1 x	Compact workshop vacuum cleaner CW-matic
2 x	Replacement belts for BSL 220/E
1 x	Solid carbide stylus for engraving
2 x	Wolfram vanadium steel milling bits
1 x	Flame shaped milling cutters
1 x	EUROline top cutter
1 x	magnetic base 80kg
1 x	Cone shaped milling cutter
1 x	Tungsten carbide cutter 1.0mm
1 x	Cylindrical cutters
1 x	Sanding Discs
1 x	Lever Dial Indicator
1 x	Broca de ponto 3.15 x 1.00
1 x	Precision magnetic gauge stand
1 x	Tungsten carbide cutters set
1 x	Broca de ponto 3.15 x 1.25
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Steel tape measure
1 x	Disc Sander TG 250/E
1 x	Set of precision cutters
1 x	Tungsten carbide cutter 2.0mm
1 x	Cylinder shaped milling cutters
1 x	Tungsten carbide cutter 3.0mm
2 x	Diamond Grinding Bits 1,8mm
1 x	High quality corundum grinding bits
1 x	Turning inserts SCMT09T304
1 x	sandpaper for PS 13 Grit 240
1 x	Slot cutter 5.0mm
2 x	TU 2004V
1 x	Broca de alta duração de 2.4mm
1 x	Core box bit 3.2mm
1 x	Precision quick-action drill chuck 0-16mm B16
1 x	Precision quick-action drill chuck 0-8mm B16
1 x	4-jaw chuck individually clamping 100mm
1 x	4-jaw chuck individually clamping 80mm
1 x	End milling cutter kit HSS 12 pcs
1 x	Threading inserts 60º
1 x	Turning inserts CCMT09T304
1 x	Felt polishers
1 x	TCMT110204
2 x	Cutter head for copy and surface milling MT3
1 x	Half round cutter 13mm
1 x	quantum revolving center CM1
1 x	Revolving center with replacement lathe centers
2 x	V-slot cutter 6.5mm
1 x	10-piece wood router cutter set
2 x	DCMT070204
2 x	Angle cutter 45 °
1 x	Coarse-toothed (18 TPI per 25mm)
2 x	Cutting tool 8 mm
1 x	RT100 - Horizontal-vertical circular dividing table
1 x	Threading inserts 60º
1 x	Cutting tool HM 20 mm
1 x	Dial gauge
2 x	Cutter head for copy and surface milling MT2
1 x	SCMT060204
1 x	RT200 - Horizontal-vertical circular dividing table
1 x	Broca de alta duração de 0.7mm
1 x	Combi cutter 6.5/2.5mm
2 x	Cutting tool 10 mm
1 x	RT150 - Horizontal-vertical circular dividing table
1 x	3-jaw chuck centrically clamping 160mm
1 x	quantum revolving center CM2
2 x	Cutting tool 16 mm
1 x	BIT-SET
1 x	Edge cutter with pin 6.4mm
1 x	DIL24/QSOP24 ZIF 150mil
1 x	End milling cutter kit HSS 20 pcs
1 x	BGA-Bottom-111
1 x	BGA-0246/0243
1 x	lathe tools 8mm
1 x	DIL40/TQFP44 ZIF PIC-1
1 x	BeeHive208S
1 x	DIL40/TQFP80-1 ZIF PIC-1A
1 x	Cotton polishers
1 x	DIL48/TQFP100 ZIF ST92Fxxx
1 x	OPTI BF20 VARIO
1 x	BGA-Bottom-105
1 x	Conjunto de três brocas de ponto
1 x	BGA-Bottom-1
1 x	DIL44/TQFP44-2 ZIF
1 x	SmartProg2
1 x	EUROline end cutter
1 x	BGA-0245/0242
1 x	DIL48/TQFP48-1 ZIF
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	BGA-Bottom-106
1 x	Flap Wheels
1 x	TU 2404
1 x	DIL40/TQFP44-1 ZIF MCS51
1 x	lathe tools 12mm
1 x	IT 150 - Indirect dividing attachment
1 x	DIL44/TQFP44-3 ZIF
1 x	Grinding mop cylinder grit 240
1 x	DIL40/TQFP64 ZIF AVRmega-2
1 x	broca de alta duração de 0,6mm
1 x	BGA-0245/0243
1 x	EUROline snipe nose pliers
1 x	Beeprog2C
1 x	TU 1503V
1 x	Grinding mop cylinder grit 120
1 x	DIL40/TQFP44 ZIF AWM-1
1 x	BGA-Bottom-118
1 x	BGA-Bottom-101

€26,632.36