€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

1 x	Table Sawr TKS 315 E
2 x	Flexible silicon discs
1 x	Corundum sanding discs for LWS
1 x	Lambswool polishing disc
1 x	Conjunto de três brocas de ponto
2 x	Screwdriver bit set. 49-piece.
1 x	Sanding fleece for LWS
1 x	Professional set for finish grinding and polishing
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Thicknesser DH 40
1 x	Cutting disc, with reinforcement
1 x	Polishing Set
2 x	Super safety and specialty bit set, 75-piece
1 x	Diamond Cutting Discs
1 x	Diamond-coated cutting and roughing disc
1 x	Diamond Cutting Discs
4 x	Pensander PS 13
2 x	Flexible silicon discs
1 x	Corundum sanding discs for LWS
2 x	Disc Sander TG 125/E
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Diamond Cutting Discs
2 x	Bench drill press TBH
1 x	Hot wire cutter THERMOCUT 650
2 x	Long neck angle grinder LHW
1 x	HSS cutting blade for OZI
2 x	Delta sander OZI/E
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
2 x	Flexible silicon discs
2 x	Belt sander BS/E
1 x	Corundum grinding disc for LWS
4 x	Diamond Coated
2 x	Flap Wheels
1 x	Diamond-coated cutting disc for MIC
1 x	Super-fine sanding discs grain 2000
1 x	Super-fine sanding discs grain 400
3 x	Belt sander BBS/S
1 x	Corundum fan sander for LWS
1 x	MICRO Miller FF 230
1 x	Super-fine sanding discs grain 000
3 x	Grinding and Polishing Machine SP/E
1 x	Corundum bound cutting disc for LWS
1 x	Corundum grinding disc for LWS
2 x	Tool holder for rotary tools
1 x	Diamond Cutting Discs
1 x	Diamond cutting blade for OZI
1 x	Corundum fan sander for LWS
1 x	TCMT090204
1 x	Insert LGTN-3
1 x	Blade holders for DS 460
1 x	sandpaper for PS 13 Grot 180
3 x	Fixed Steady
4 x	Centre Turning Attachment
1 x	Threading inserts 60º
1 x	TCMT110204
1 x	WCMT050308
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Threading inserts 60º
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Turning inserts CCMT09T304
1 x	SCMT09T304
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	SCMT060204
1 x	Threading inserts 60º
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Polishing machine PM 100
1 x	Blade for Wood and Plastics
1 x	Insert LGTN-2
2 x	Collet Set for accurate use on round components
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	surface planing and thicknessing ADH 200
1 x	DCMT070204
1 x	Turning inserts WCMX050308F
1 x	Blade guides separately
1 x	Turning inserts CCMT060204
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Turning inserts SCMT09T304
2 x	Tungsten Carbide Tipped (TCT)
1 x	Chuck for TBM 220
1 x	Cone shaped milling cutter
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Fibre-Cut Discs
1 x	Edge cutter with pin 6.4mm
1 x	Felt polishers
1 x	High quality corundum grinding bits
1 x	Fibre-Cut Discs
2 x	Engraving tool GG
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Felt polishers
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Flexible polishing pad set
2 x	Universal and oil siphoning pump AP 12
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Flap Wheels
1 x	Five piece HSS chisel set
1 x	Flexishaft MICROMOT 110/BF
2 x	Four Jaw Chuck
1 x	Grinding mop cylinder grit 120
2 x	Compact workshop vacuum cleaner CW-matic
2 x	Dividing attachment TA 230 for PF 250
1 x	Grinding mop cylinder grit 80
2 x	Gear Chuck
2 x	Footswitch FS
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	DCGT 070202F-AL
1 x	Felt polishers
1 x	Flexishaft MICROMOT 110/P
2 x	Felt cloth polishing disc (100 x 15mm)
1 x	Grinding mop cylinder grit 120
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Insert CCGT120404-AK
1 x	Fine dust paper filter for CW-matic
1 x	Felt polishers
1 x	Insert CCGT060202-AK
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Half round cutter 13mm
1 x	Fibre-Cut Discs
1 x	Fibre-Cut Discs
1 x	Flexible polishing pad set
1 x	Flame shaped milling cutters
1 x	Fluted filter for CW-matic
1 x	Grinding mop cylinder grit 240
1 x	Router base OFV
1 x	Angle cutter 45 °
1 x	Step clamps made of steel
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Replacement glue sticks for HKP 220
2 x
1 x	BGA-0245/0241
1 x	BeeProg2
1 x	BGA-Bottom-103
1 x	BGA-Bottom-1
1 x	Aluminium Die-Cast
1 x	BGA-Bottom-111
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Independent four jaw chuck for the DB 250
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	DIL8/SOT23-6 ZIF-CS PIC
1 x	Blade for Steel and brass
1 x	Replacement belts for BSL 220/E
1 x	Ball-shaped diamond coated 1.2mm
1 x	BGA-Bottom-105
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Bench Circular Saw KS 230
1 x	BGA-Bottom-106
1 x	BeeHive204
1 x	Broca de alta duração de 2.8mm
1 x	BGA-Bottom-108
1 x	Three-jaw steel drill chuck
1 x	Ball-shaped diamond coated 3.2mm
1 x	BGA-0245/0242
1 x	Ball-shaped diamond coated 2.2mm
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	10-piece wood router cutter set
1 x	BGA-Bottom-10
1 x	Angle polisher WP/E
1 x	BGA-Bottom-115
1 x	Spare cutting wire
1 x	BGA-0246/0244
1 x	Beeprog2C
1 x	BGA-0246/0243
1 x	14-piece parallel supports set
1 x	Backing disc for LWS

€17,415.52