€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Manufacturers

Information

1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Independent four jaw chuck for the DB 250
1 x	Polishing machine PM 100
1 x	Three jaw chuck for the lathe DB 250
1 x	Replacement glue sticks for HKP 220
1 x	Engraving tool GG
1 x	Precision lathe PD 250/E
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	Flap Wheels
1 x	6-piece screwdriver and cross-recess set ESD
1 x	Diamond Cutting Discs
1 x	Diamond Grinding Bits 1mm
1 x	6-piece wrench key set ESD
1 x	ESD Tweezers 5-195
1 x	6-piece screwdriver set ESD
1 x	Ceramic-tipped tweezers and ESD 5-096
1 x	Diamond Grinding Bits 1,8mm
1 x	ESD Tweezers 5-193
1 x	Diamond Cutting Discs
1 x	Diamond Grinding Bits 1,8mm
1 x	BeeHive208S
1 x	MICROMOT glue gun HKP 220
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Edge cutter with pin 6.4mm
1 x	Polishing felt, medium hard
1 x	Universal holder UHZ
1 x	BGA-Bottom-111
1 x	Super-fine sanding discs grain 000
1 x	BGA-0245/0243
1 x	Slot cutter 6.5mm
1 x	Rebating cutter 6.4mm
1 x	MICROFLAME burner MFB/E
1 x	Side cutters EUROline-Conductive
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Lathe System PD 400
1 x	BGA-Bottom-101
1 x	HSS boring tool set, 6 pieces
1 x	Tungstein carbide rasp - and cutting disc
1 x	Slot cutter 3.2mm
1 x	Backing disc for LWS
1 x	Cutting disc, with reinforcement
1 x	sanding belts for BBS/s Grit 80
1 x	Professional polishing sponge
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Router base OFV
1 x	Diamond-coated cutting disc for MIC

€11,426.87