€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

1 x	Sanding Discs
1 x	High quality corundum grinding bits
1 x	Flap Wheels
1 x	High quality corundum grinding bits
1 x	Sanding Drums
1 x	High quality corundum grinding bits
1 x	Sanding Discs
1 x	High quality corundum grinding bits
1 x	Sanding Drums
1 x	Sanding Drums
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	Sanding Drums
1 x	Rebating cutter 6.4mm
1 x	Fibre-Cut Discs
1 x	Wheels brushes
1 x	Cups brushes
1 x	Metal Cutting Blades
1 x	Core box bit 3.2mm
1 x	Brass brushes
1 x	HSS twist drill set with centring pin
1 x	Edge cutter with pin 6.4mm
1 x	Steel cups
1 x	Angle cutter 45 °
1 x	Stainless steel wheels
1 x	Fibre-Cut Discs
1 x	Stainless steel cups
1 x	Special Fused Alumina (Hardness N).
1 x	Tungsten carbide drills Ø1mm
1 x	HSS twist drill set to DIN 338
1 x	Diamond Cutting Discs
1 x	V-slot cutter 6.5mm
1 x	Fibre-Cut Discs
1 x	HSS drill bits 1.2mm
1 x	Fibre-Cut Discs
1 x	Tungsten carbide drills Ø2mm
1 x	Diamond Cutting Discs
1 x	HSS drill bits 1.6mm
1 x	HSS drill bits 1.0mm
1 x	Stainless steel brushes
1 x	Diamond Cutting Discs
1 x	10-piece wood router cutter set
1 x	HSS drill bits 0.8mm
1 x	Fibre-Cut Discs
1 x	Slot cutter 5.0mm
1 x	Combi cutter 6.5/2.5mm
1 x	Slot cutter 3.2mm
1 x	Steel wheels
1 x	HSS drill bits 0.5mm
1 x	Half round cutter 13mm
1 x	Steel brushes
1 x	Engraving tool GG
1 x	Tungsten carbide drills Ø1,5mm
1 x	Diamond Cutting Discs
1 x	Diamond Grinding Bits 1,8mm
1 x	Conjunto de três brocas de ponto
1 x	Rounding over cutter 6.4mm
1 x	Slot cutter 6.5mm
1 x	Fibre-Cut Discs
1 x	Polishing paste
1 x	Felt polishers
1 x	Flexible silicon discs
1 x	Flexible polishing pad set
1 x	Cotton polishers
1 x	Flexible polishing pad set
1 x	Cotton polishers
1 x	Flexible silicon discs
1 x	Felt polishers
1 x	Felt polishers
1 x	Flexible silicon discs
1 x	Cotton polishers
1 x
1 x	Bottom PSOP44 NOR-1

€411.66