€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

1 x	Long neck angle milling/drilling unit LWB 220/E
1 x	MICRO Miller FF 230
1 x	MICRO Miller MF 70
1 x	Bench drill press TBH
2 x	Drill chuck with sliding sleeve for the tailstock
1 x	Bench drill machine TBM 220
2 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-5
1 x	Broca de alta duração de 2.8mm
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
1 x	DIL44/TSOP44-II ZIF 400mil
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x	DIL28/TSOP28 ZIF 11.8 mm
2 x	Diamond Cutting Discs
2 x	Diamond Cutting Discs
2 x	Broca de alta duração de 2.6mm
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Five piece HSS chisel set
1 x	DIL40/TSOP40 ZIF 18.4mm
1 x	Three jaw chuck for the lathe DB 250
1 x	DIL28/TSOP28 ZIF 11,8mm Flash
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Broca de alta duração de 2.7mm
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-3
1 x	Diamond Grinding Bits 1,8mm
1 x	Independent four jaw chuck for the DB 250
2 x	Bottom PSOP44 NOR-1
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-2
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
2 x	Bottom PSOP44 NOR-3
1 x	DIL32/TSOP32 ZIF 12.4mm Flash
1 x	Broca de alta duração de 3.0mm
1 x	Diamond Grinding Bits 5mm
1 x	DIL40/TSOP40 ZIF-CS 12.4mm
1 x	Diamond Grinding Bits 1,8mm
1 x	DIL32/TSOP32 ZIF 11.8mm
1 x	Ball-shaped diamond coated 2.2mm
1 x	Diamond Grinding Bits 1mm
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-6
1 x	DIL48/TSOP48 ZIF 18.4mm
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
2 x	Diamond Cutting Discs
1 x	Diamond Twist Drills
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	DIL48/TSOP48 ZIF 15.4mm
2 x	Diamond Cutting Discs
1 x	Broca de alta duração de 2.9mm
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-1
1 x	Ball-shaped diamond coated 3.2mm
1 x	Ball-shaped diamond coated 1.2mm
1 x	BGA-Bottom-101
1 x	Fibre-Cut Discs
2 x	BGA-Bottom-102
1 x	BeeHive208S
1 x	BGA-Bottom-106
1 x	DIL44/SSOP44 ZIF 240mil
1 x	DIL48/MQFP80 ZIF C164
2 x	BGA-Bottom-111
1 x	BGA-Bottom-127
1 x	BGA-0245/0242
1 x	BGA-Bottom-126
2 x	BGA-Bottom-115
1 x	DIL48/SSOP48 ZIF 300mil
1 x	DIL48/SSOP90 ZIF Flash-1
2 x	BGA-Bottom-11
1 x	Metal Cutting Blades
1 x	BGA-Bottom-103
1 x	DIL48/MQFP80 ZIF C500
1 x	Fibre-Cut Discs
1 x	Fibre-Cut Discs
1 x	DIL48/SSOP70 ZIF OKI-1
1 x	BGA-Bottom-10
1 x	Fibre-Cut Discs
1 x	DIL48/SSOP56 ZIF Flash-3
1 x	BGA-Bottom-125
1 x	DIL48/SSOP56 ZIF Flash-1
2 x	BGA-0245/0243
1 x	Fibre-Cut Discs
1 x	Fibre-Cut Discs
1 x	BGA-Bottom-105
1 x	DIL8/SSOP8 ZIF 120mil
2 x	BGA-Bottom-1
1 x	BGA-0246/0243
1 x	BGA-0246/0244
1 x	DIL40/MQFP52 ZIF ADuC812
2 x	BGA-Bottom-108
2 x	BeeHive204
1 x	DIL48/SSOP56 ZIF Flash-2
1 x	DIL34/SSOP34 ZIF 200 mil
1 x	BGA-Bottom-118
1 x	BGA-0245/0241
1 x	DIL34/SSOP34-1 ZIF-CS
1 x	HSS drill bits 0.5mm
1 x	Broca de alta duração de 0.8mm
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	DIL40/PLCC44 ZIF AWM-1
1 x	DIL48/LQFP64 ZIF M16C/Tiny
1 x	Broca de alta duração de 0.5mm
1 x	HSS twist drill set with centring pin
1 x	DIL44/PSOP44 ZIF 600 mil
1 x	DIL32/PLCC32 ZIF
1 x	Beeprog2C
1 x	HSS twist drill set to DIN 338
1 x	DIL20/PLCC20 ZIF-CS
1 x	Broca de alta duração de 1.0mm
1 x	DIL40/PLCC44 ZIF W-EPROM / MCS51
1 x	Broca de alta duração de 1.3mm
1 x	broca de alta duração de 0,6mm
1 x	Bottom PSOP44 NOR-2
1 x	DIL32/PLCC32 ZIF-CS
1 x	DIL48/LQFP64 ZIF M38039/M39049
1 x	DIL32/PLCC32 ZIF-CS NOR-1
1 x	Broca de ponto 3.15 x 1.25
1 x	DIL28/TSSOP28 ZIF 170mil
1 x	Broca de alta duração de 0.3mm
1 x	broca de alta duração de 0,2mm
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	Broca de alta duração de 2.4mm
1 x	HSS drill bits 1.0mm
1 x	DIL24/TSSOP24 ZIF 170mil
1 x	DIL28/PLCC32 ZIF EPROM
1 x	Milling cutter set (6 - 10mm)
1 x	HSS drill bits 1.2mm
1 x	High quality corundum grinding bits
1 x	Tungsten carbide drills Ø1,5mm
1 x	Broca de alta duração de 1.2mm

€29,706.91