€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

1 x	Felt cloth polishing disc (100 x 15mm)
1 x
1 x	Blade for Steel and brass
1 x	Fine dust paper filter for CW-matic
1 x	Universal and oil siphoning pump AP 12
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Blade for Wood and Plastics
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Bandsaw blade of bimetal for MBS 240/E
2 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Blade guides separately
1 x	Super safety and specialty bit set, 75-piece
1 x	Diamond blade for MBS 240/E
1 x	Universal polishing paste
1 x	Screwdriver bit set. 49-piece.
1 x	Fluted filter for CW-matic
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Complete Engraving Kit with trial glass
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x	MICROMOT glue gun HKP 220
1 x	Super-Cut
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Sanding pads for OZI 220/E grit 240
1 x	Multipurpose Vices Primus100
1 x	Engraving tool GG
1 x	MICROFLAME burner MFB/E
1 x	MICRO Heat gun MH 550
2 x	BeeHive208S
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	HSS immersion saw blades for OZI
1 x	Diamond Coated
1 x	Diamond cutting blade for OZI
1 x	Replacement belts for BSL 220/E
1 x	Independent four jaw chuck for the DB 250
1 x	Sanding pads for OZI 220/E grit 150
1 x	Sanding pads for OZI 220/E grit 80
2 x	Crimping plier for BNC
1 x	Micro Compound Table KT 70
1 x	HSS immersion saw blades for OZI
1 x	Machine Vice MS 4
1 x	Multipurpose Vices Primus 75
1 x	Precision Vice FMZ
1 x	MICRO-screwdrivers
1 x	Replacement belts for BSL 220/E
1 x	Universal holder UHZ
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Chuck for TBM 220
1 x	Tungsten Carbide Tipped (TCT)
1 x	Three jaw chuck for the lathe DB 250
1 x	Five piece HSS chisel set
1 x	MICROFLAM gas soldering set MGS
1 x	Replacement belts for BSL 220/E
2 x	CRIMPING PLIERS/WIRE STRIPPER
2 x	Precision steel vice PM 40
1 x	Replacement belts for BSL 220/E
1 x	HSS cutting blade for OZI
1 x	Precision Vice FMS 75
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	Router base OFV
2 x	Grinding mop cylinder grit 120
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	BGA-Bottom-1
1 x	Grinding mop cylinder grit 240
1 x	Hot wire cutter THERMOCUT 230/E
1 x	Replacement carving blades for MSG
1 x	Jig saw STS 12/E
1 x	BGA-Bottom-115
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Table Saw FET
1 x	BeeHive204
1 x	Surface planer AH 80
1 x	Motor-driven carving device MSG
1 x	Scroll saw DS 230/E

€21,445.76