€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

1 x	Sanding pads for OZI 220/E grit 150
1 x	HSS immersion saw blades for OZI
1 x	Diamond cutting blade for OZI
1 x	HSS cutting blade for OZI
1 x	6-piece set of ESD/EGB tweezers
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	ESD Tweezers 5-194
1 x	ESD-handling set
2 x	Self-adhesive white corundum sanding discs for TG 250/E
2 x	Four Jaw Chuck
2 x	MICROMOT Mains Adapter NG 2/S
2 x	sandpaper for PS 13 Grit 400
1 x	ESD Tweezers 5-193
1 x	ESD Tweezers 5-191
2 x	sandpaper for PS 13 Grot 180
2 x	Self-adhesive silicone film for easy sanding disc replacement
5 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	ESD Tweezers 5-192
2 x	sandpaper for PS 13 Grit 240
1 x	ESD Tweezers 5-195
2 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	ESD-handling ser 9-361
1 x	Conj 5 pinças ESD
1 x	Round nose pliers 45º EUROline-Conductive
2 x	Diamond-coated cutting disc for MIC
1 x	6-piece wrench key set ESD
2 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	PLCC Puller
1 x	Contact bracelet with spiral cord
2 x	Replacement belts for BSL 220/E
4 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Earth wire
1 x	6-piece socket wrenches ESD
1 x	EUROline-Conductive set of pliers
1 x	Grinding mop cylinder grit 120
1 x	ESD Brushe
1 x	End side cutters EUROline-Conductive
1 x	ESD Brushe
1 x	Mini side cutters EUROline-Conductive
1 x	Mini side cutters EUROline-Conductive
1 x	Crocodile clip
2 x	BeeProg2
1 x	Mini side cutters EUROline-Conductive
1 x	Earth wire
1 x	PLCC Extractor
4 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Earth wire with dummy Schunko-plug
4 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
3 x	Chuck for TBM 220
1 x	6-piece screwdriver and cross-recess set ESD
1 x	End side cutters 45º EUROline-Conductive
1 x	Grinding mop cylinder grit 120
2 x	Coarse-toothed (10 TPI per 25mm)
1 x	6-piece screwdriver set ESD
2 x	Replacement cutting disc for MICRO cutter MIC
1 x	Floor cover ESD
1 x	Snipe nose pliers 45º EUROline-Conductive
2 x	Polishing Set
1 x	Cutting disc, with reinforcement
1 x	Earthing module
2 x	Special Fused Alumina (Hardness N).
1 x	Beeprog2C
2 x	Blade holders for DS 460
2 x	Replacement belts for BSL 220/E
1 x	Grinding mop cylinder grit 80
2 x	Replacement belts for BSL 220/E
1 x	Grinding mop cylinder grit 240
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	6-piece TORX-screwdriver-set ESD
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Tool holder for rotary tools
2 x	Backing disc for LWS
1 x	PRECISION WIRE STRIPPER ESD-PLUS
2 x	Professional set for finish grinding and polishing
2 x	Lambswool polishing disc
2 x	Spare cutting wire
2 x	Super-fine sanding discs grain 400
1 x	Gear Chuck
1 x	Collet Set for accurate use on round components
1 x	Polishing felt, medium hard
1 x	Coarse-toothed (25 TPI per 25mm)

€5,753.59