€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

BGA-0245/0242

  • special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48 
  • top board: BGA-Top-2 ZIF-CS (order no. 70-0242) 
  • bottom board: BGA-Bottom-1 (order no. 70-0245) 
  • ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness. 
  • The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board. 
  • operation life of ZIF socket - 500.000 actuations 
  • order no.: 70-0245/0242 

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil


 

Converter manual

  • Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer. 
  • Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device). 
  • Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming. 
  • Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device. 
  • To take out the device, open converter ClamShell ZIF socket and remove device from it. 
  • When you finish work with converter, remove it from the programmer ZIF socket. 
  • Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device. 
  • For handling with the device we recommended to use a vacuum pick up tool. 
  • The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

 

     



Reviews
Manufacturers
1 x Disc Sander TG 250/E
1 x DIL48/TSOP56 ZIF 18.4mm Flash-1
1 x Bottom PSOP44 NOR-1
1 x DIL32/TSOP32 ZIF 11.8mm
2 x Tungsten carbide cutters set
1 x DIL28/TSOP28 ZIF 11.8 mm
1 x Fibre-Cut Discs
1 x Universal polishing paste
1 x DIL40/TSOP40 ZIF 18.4mm
1 x Cutting tools of high quality cobalt HSS steel, ground
2 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Replacement carving blades for MSG
2 x High quality corundum grinding bits
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x High quality corundum grinding bits
1 x Delta sander OZI/E
1 x DIL48/TSOP56 ZIF 18.4mm Flash-5
1 x DIL32/TSOP32 ZIF 18.4mm Flash
1 x Bottom PSOP44 NOR-2
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x DIL48/TSOP56 ZIF 18.4mm Flash-2
1 x High quality corundum grinding bits
1 x Belt sander BBS/S
1 x Fibre-Cut Discs
1 x Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x DIL40/TSOP40 ZIF-CS 12.4mm
1 x DIL48/TSOP48 ZIF 15.4mm
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x Replacement cutting disc for MICRO cutter MIC
2 x Flexible polishing pad set
1 x MICROMOT steel collet set
1 x DIL48/TSOP56 ZIF 18.4mm Flash-6
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x Belt sander BS/E
1 x DIL48/TSOP56 ZIF 18.4mm Flash-3
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x Milling cutter set (6 - 10mm)
1 x HSS twist drill set with centring pin
1 x sanding belts for BBS/s Grit 80
3 x Hot wire cutter THERMOCUT 650
2 x Tungsten Carbide Tipped (TCT)
1 x Milling cutter set (2 - 5mm)
1 x Fibre-Cut Discs
1 x DIL44/MLF44-1 ZIF-CS
1 x Top PSOP44 ZIF 600mil
1 x DIL48/TSOP48 ZIF 18.4mm
1 x DIL44/PSOP44 ZIF 600 mil
1 x sanding belts for BBS/s Grit 150
3 x Jig saw STS 12/E
1 x Mini side cutters EUROline-Conductive
1 x DIL8/SOT23-6 ZIF-CS PIC
1 x DIL32/MLF32-1 ZIF
1 x DIL32/TSOP32 ZIF 12.4mm Flash
1 x DIL44/TSOP44-II ZIF 400mil
1 x Three-jaw steel drill chuck
1 x Fibre-Cut Discs
1 x DIL8/SOIC8 ZIF 150mil
1 x DIL32/TSOP32 ZIF 18.4mm Flash
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Bottom PSOP44 NOR-3
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x Polishing felt, medium hard
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x Complete Engraving Kit with trial glass
1 x sanding belts for BBS/s Grit 240
2 x High quality corundum grinding bits
1 x End side cutters EUROline-Conductive
1 x Five piece HSS chisel set
1 x Flexible polishing pad set
2 x Disc Sander TG 125/E
1 x DIL40/MLF64 ZIF-CS AVR-1
1 x Replacement belts for BSL 220/E
3 x Nylon Fleece Brushes
1 x DIL40/PLCC52 ZIF AWM-1
1 x Band knife of hardened spring band steel (without teeth)
1 x DIL20W/PLCC20 ZIF
1 x DIL48/PQFP100 ZIF ST92Fxxx
1 x DIL40/PLCC52 ZIF MCS51-2
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x DIL32/SDIP64 ZIF H8-1
2 x Corundum fan sander for LWS
1 x DIL32/SDIP64-1 ZIF Toshiba-BM1136
2 x Centre Turning Attachment
1 x DIL32/PLCC84 ZIF HS3334ESCF1H
1 x DIL48/SDIP56 ZIF 68HC05Bx
1 x DIL48/PQFP100 ZIF ST10-1
1 x DIL40/PLCC68 ZIF DS87C550
1 x DIL28/PLCC28 ZIF-CS
2 x TU 1503V
2 x Backing disc for LWS
1 x MICRO Band Saw MBS 240/E
1 x DIL40/PLCC44 ZIF PIC-1
1 x DIL40/PLCC28 ZIF AWM-1
1 x Coarse-toothed (25 TPI per 25mm)
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x Saw blade made of high-alloy special steel
1 x HSS immersion saw blades for OZI
1 x Spiral blade. 125mm long with plain ends (without pins).
2 x TU 2404
1 x DIL32/PLCC32 ZIF-CS NOR-1
1 x DIL48/PQFP144 ZIF ST10-1
1 x Crosscut 'Super-Cut' blade
1 x DIL32/PLCC32 ZIF
1 x DIL40/SDIP52 ZIF 55x
1 x Coarse-toothed (10 TPI per 25mm)
2 x HSS immersion saw blades for OZI
1 x Coarse-toothed (18 TPI per 25mm)
1 x DIL42/SDIP42 ZIF 600mil
1 x DIL20/PLCC20 ZIF-CS
1 x Blade for Wood and Plastics
1 x DIL40/PLCC68 ZIF AWM-1
1 x DIL24/TSSOP24 ZIF 170mil
1 x DIL32/PLCC32 ZIF-CS
2 x OPTI BF20L VARIO
1 x DIL32/SDIP32 ZIF 400mil
1 x Supercut jig saw blades of special steel
1 x DIL40/PLCC52 ZIF DS87C530
1 x Diamond blade
1 x DIL48/PQFP100 ZIF PLD-1
1 x DIL28/PLCC84 ZIF HS538ESC01H
1 x TU 2004V
1 x DIL40/PLCC52 ZIF AWM-2
1 x Jig saw blades made of HSS
2 x Diamond Grinding Bits 1,8mm
1 x DIL28/PLCC28 ZIF
1 x DIL40/PLCC44 ZIF AWM-1
1 x DIL28/PLCC32 ZIF EPROM
1 x DIL40/PLCC44 ZIF W-EPROM / MCS51
1 x DIL48/PQFP80 ZIF M58BW-1
1 x 6-piece TORX-screwdriver-set ESD
1 x Disc cutters
2 x Replacement belts for BSL 220/E
1 x DIL40/QFP100 ZIF AVR-1
2 x Corundum grinding disc for LWS
1 x DIL48/QFP100 ZIF NEC-2
1 x Snipe nose pliers 45º EUROline-Conductive
1 x DIL48/QFP100 ZIF NEC-1
1 x Slot cutter 6.5mm
2 x Chuck for TBM 220
1 x DIL48/SSOP56 ZIF Flash-1
1 x Diamond Grinding Bits 5mm
1 x DIL48/SSOP90 ZIF Flash-1
1 x DIL18W/SOIC18 ZIF 300mil
1 x Cross-recess Screwdrivers 0
1 x DIL40/QFP64-3 ZIF NEC-1
1 x PLCC Puller
1 x Round nose pliers 45º EUROline-Conductive
1 x DIL40/QFP144 ZIF LPC-1
1 x Rasp plate with metal burrs made from wolfram carbide for LWS
2 x BIT-SET
1 x High quality corundum grinding bits
1 x DIL3/SOT23-3 ZIF-CS
1 x DIL40/SOIC28 ZIF AWM-1
1 x High quality corundum grinding bits
1 x DIL44/SSOP44 ZIF 240mil
1 x DIL28W/SOIC28 ZIF 300mil
1 x Slot cutter 3.2mm
1 x DIL48/QFN48 ZIF-CS
2 x Sanding bands 14x13mm
1 x Diamond-coated cutting disc for MIC
1 x Corundum fan sander for LWS
1 x DIL48/SSOP56 ZIF Flash-3
1 x Sanding pads for OZI 220/E grit 80
1 x Corundum bound cutting disc for LWS
1 x Slot cutter 5.0mm
1 x DIL8/QFN8-1 ZIF-CS
1 x DIL16/SOIC16 ZIF 200 mil
1 x DIL40/QFP64-1 ZIF-CS NEC-1
1 x HSS drill bits 1.2mm
2 x Fluted filter for CW-matic
1 x DIL20/SOIC20 ZIF 300 mil
1 x HSS drill bits 0.5mm
1 x DIL40/QFP64-4 ZIF NEC-1
1 x DIL28/SOIC28 ZIF 330 mil
1 x HSS drill bits 0.8mm
1 x 6-piece wrench key set ESD
1 x DIL48/QFP100 ZIF PLD-4
1 x ACCENT SERVICE TOOLS SET
1 x DIL40/SOIC20 ZIF AWM-1
1 x DIL48/QFP100 ZIF MB90F-1
1 x 6-piece screwdriver set ESD
1 x DIL40/QFP80 ZIF M37702
1 x DIL48/SSOP48 ZIF 300mil
1 x DIL48/QFP100 ZIF PLD-2
1 x Core box bit 3.2mm
1 x DIL48/LQFP64 ZIF M38039/M39049
1 x Flat nose pliers 45º EUROline-Conductive
1 x ESD-handling set
2 x HSS drill bits 1.0mm
1 x Solid carbide stylus for engraving
2 x Thicknesser DH 40
1 x ESD-handling ser 9-361
1 x DIL16/SOIC16-1 ZIF 170mil
1 x DIL40/QFP144 ZIF H8S-1
1 x Rebating cutter 6.4mm
1 x DIL28/QFP52 ZIF-CS SX52
1 x Brass contact cleaner brush
1 x DIL24W/SOIC24 ZIF 300mil
1 x DIL44/SOIC44 ZIF-CS
1 x DIL48/LQFP64 ZIF M16C/Tiny
1 x Angle cutter 45 °
1 x Lathe System PD 400
1 x Polishing machine PM 100
1 x Combi cutter 6.5/2.5mm
1 x DIL16W/SOIC16 ZIF 300mil
1 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x DIL34/SSOP34-1 ZIF-CS
1 x DIL32/QFP64 ZIF H8-1
1 x DIL48/QFP100 ZIF PLD-3
1 x DIL40/SOIC20 ZIF MB95-1
1 x Tungstein carbide rasp - and cutting disc
1 x Surface planer AH 80
1 x Precision lathe PD 250/E
2 x Corundum sanding discs for LWS
1 x Snipe nose pliers 45º EUROline-Conductive
1 x Diamond Grinding Bits 1,8mm
1 x HSS cutting blade for OZI
1 x DIL20W/SOIC20 ZIF 300mil
1 x Half round cutter 13mm
1 x 6-piece socket wrenches ESD
1 x DIL28/QFP64 ZIF H8/3644
1 x DIL48/QFP100 ZIF MSP430-1
1 x DIL28/QFN28-2 ZIF-CS
1 x Edge cutter with pin 6.4mm
1 x DIL32/SOIC32 ZIF 300 mil
1 x DIL48/QFP100 ZIF PLD-1
1 x Solid carbide stylus for engraving
1 x Cylindrical cutters
1 x DIL40/QFP64 ZIF LPC-1
1 x 
1 x High quality corundum grinding bits
1 x V-slot cutter 6.5mm
1 x DIL40/QFP64-2 ZIF-CS NEC-1
1 x DIL32/SOIC32 ZIF 445mil
1 x 6-piece set of ESD/EGB tweezers
1 x DIL14W/SOIC14 ZIF 150mil
1 x HSS twist drill set to DIN 338
1 x Four Jaw Chuck
2 x Flap Wheels
1 x Rounding over cutter 6.4mm
1 x Sanding fleece for LWS
1 x DIL48/SSOP56 ZIF Flash-2
1 x Snipe nose pliers 45º EUROline-Conductive
1 x DIL44/QFN44-2 ZIF-CS
1 x DIL20/SOIC20 ZIF 200mil
2 x Hot wire cutter THERMOCUT 12/E
1 x Corundum grinding disc for LWS
1 x Diamond-coated cutting and roughing disc
1 x DIL34/SSOP34 ZIF 200 mil
1 x Corundum sanding discs for LWS
1 x Steel cups
1 x Cups brushes
1 x Wheels brushes
2 x Sanding Discs
1 x Sanding pads for OZI 220/E grit 150
1 x DIL48/TQFP100-2 ZIF PLD-1
1 x Stainless steel brushes
1 x Replacement cutting wire for the THERMOCUT 12/E
1 x Tungsten carbide drills Ø1mm
3 x Sanding Drums
1 x Sanding Discs
1 x Stainless steel wheels
1 x BGA-Bottom-108
1 x Treated muslin polishing wheel, stiff (100 x 15mm)
1 x Screwdriver 5.5
1 x BGA-0245/0241
1 x Screwdriver 4.0
1 x Felt cloth polishing disc (100 x 15mm)
1 x Stainless steel cups
1 x BGA-Bottom-105
1 x Three piece thread cutting set
1 x Microfibre polishing wheel, 15-ply (100mm)
1 x MICROMOT extension cord. 300cm.
1 x Sanding Drums
1 x DIL40/TQFP44 ZIF AWM-1
1 x Replacement belts for BSL 220/E
1 x DIL48/TQFP144 ZIF ST10-1
1 x Router base OFV
1 x Screwdriver 3.0
1 x DIL44/TQFP44-3 ZIF
1 x DIL44/TQFP44-2 ZIF
1 x Engraving tool GG
1 x DIL48/TQFP100 ZIF PLD-2
2 x Flap Wheels
1 x DIL48/TQFP100 ZIF ST92Fxxx
1 x Diamond Twist Drills
1 x DIL40/TQFP44 ZIF EM652X
1 x Sanding pads for OZI 220/E grit 240
1 x BGA-Bottom-11
2 x Sanding Drums
1 x DIL40/TQFP80-1 ZIF PIC-1A
1 x Steel wheels
1 x BGA-0246/0244
1 x BeeHive204
1 x Independent four jaw chuck for the DB 250
1 x BeeHive208S
1 x Cross-recess Screwdrivers Pozidriv 1
1 x MICROFLAM gas soldering set MGS
1 x BGA-Bottom-101
1 x Compact workshop vacuum cleaner CW-matic
1 x DIL40/TQFP64 ZIF EM652X
1 x BGA-Bottom-103
1 x Screwdriver 2.5
1 x Cross-recess Screwdrivers Pozidriv 2
1 x MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x DIL44/TQFP44-1 Zif
1 x BGA-0245/0243
1 x Three jaw chuck for the lathe DB 250
1 x Sanding bands 14x13mm
1 x BGA-Bottom-102
€55,098.36
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Elnec
Elnec Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook