BGA-Bottom-164, Oficina-digital.com

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

3 x	Silicon-Carbide.
1 x	Special Fused Alumina (Hardness N).
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Three-jaw steel drill chuck
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	MICROMOT steel collet set
1 x	Mini side cutters EUROline-Conductive
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Supercut jig saw blades of special steel
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Five piece HSS chisel set
1 x	Micro Compound Table KT 70
1 x	End side cutters EUROline-Conductive
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	End side cutters 45º EUROline-Conductive
1 x	Independent four jaw chuck for the DB 250
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Diamond-coated cutting and roughing disc
1 x	Footswitch FS
1 x	Flexishaft MICROMOT 110/BF
1 x	Polishing Set
1 x	Mini side cutters EUROline-Conductive
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	14-piece parallel supports set
1 x	Protective device for hand-operated MICROMOT
1 x	Flexishaft MICROMOT 110/P
1 x	Side cutters EUROline-Conductive
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	MICROMOT extension cord. 300cm.
1 x	Mill/Drill Unit BFB 2000.
1 x	Blade holders for DS 460
2 x	BeeHive204
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Round nose pliers 45º EUROline-Conductive
1 x	Mini side cutters EUROline-Conductive
1 x	Dividing attachment TA 230 for PF 250
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	MICROMOT tool holder
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	BGA-Bottom-180
1 x	BGA-Bottom-154
1 x	Grinding mop cylinder grit 240
1 x	BGA-Bottom-108
1 x	BGA-Bottom-139
1 x	BGA-Bottom-146
1 x	BGA-0246/0244
1 x	BGA-Bottom-111
1 x	BGA-Bottom-187
1 x	BGA-Bottom-165
1 x	BGA-Bottom-149
1 x	BeeHive208S
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	BGA-Bottom-145
1 x	BGA-0245/0241
1 x	BGA-Bottom-132
1 x	Lathe System PD 400
1 x	BGA-0245/0242
1 x	Grinding mop cylinder grit 120
1 x	HSS boring tool set, 6 pieces
1 x	Wood Lathe DB900
1 x	Super-fine sanding discs grain 000
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Precision steel vice PM 40
1 x	BGA-Bottom-13
1 x	Beeprog2C
1 x	BGA-Bottom-105
1 x	BGA-Bottom-177
1 x	BGA-Bottom-164
1 x	Corundum fan sander for LWS
1 x	BGA-Bottom-15
1 x	Three piece thread cutting set
1 x	BGA-Bottom-157
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	BGA-Bottom-125
1 x	BGA-Bottom-18
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	BGA-Bottom-10
1 x	BGA-Bottom-140
1 x	BGA-Bottom-115
1 x	BGA-Bottom-127
1 x	Step clamps made of steel
1 x	Precision lathe PD 250/E
1 x	BGA-Bottom-174
1 x	Safety Insulated Pozidriv Screwdriver 14-643VDE

€22,730.60