€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Cross-recess Screwdrivers 00
1 x	Cross-recess Screwdrivers 000
1 x	Cross-recess Screwdrivers 1
1 x	Cross-recess Screwdrivers 1
1 x	Cross-recess Screwdrivers 0
1 x	Screwdriver 2.5
1 x	Screwdriver 1.5
1 x	Screwdriver 4.0
1 x	Screwdriver 0.8
1 x	Socket Wrenches 3.2
1 x	Socket Wrenches 4.5
1 x	Socket Wrenches 2.0
1 x	Socket Wrenches 3.5
1 x	Socket Wrenches 4.0
1 x	BeeProg2
1 x	6-piece socket wrenches ESD
1 x	6-piece TORX-screwdriver-set ESD
1 x	6-piece screwdriver set ESD
2 x	Beeprog2C
2 x	Precision steel vice PM 40
1 x	Cross-recess Screwdrivers 000
2 x	Machine Vice MS 4
2 x	Tungsten carbide cutters set
1 x	Cross-recess Screwdrivers 00
2 x	Step clamps made of steel
1 x	Cross-recess Screwdrivers 2
1 x	Cross-recess Screwdrivers 1
2 x	Diamond-coated cutting disc for MIC
2 x	Replacement cutting disc for MICRO cutter MIC
1 x	Belt sander BBS/S
1 x	broca de alta duração de 0,2mm
2 x	Conjunto de três brocas de ponto
1 x	Cutter head for copy and surface milling MT2
1 x	IC Test clip 20 pins
1 x	Parting tool 10mm
1 x	Insert LGTN-2
1 x	4-jaw chuck individually clamping 80mm
3 x	MICRO cutter MIC
1 x	2-speed scroll saw DSH
1 x	Super jig saw STS/E
3 x	Surface planer AH 80
2 x	Thicknesser DH 40
3 x	Table Saw FET
3 x	Jig saw STS 12/E
2 x	MICRO woodturning lathe DB 250
3 x	MICRO shaper MP 400
1 x	Fibre-Cut Discs
1 x	Fibre-Cut Discs
1 x	Fibre-Cut Discs
1 x	Fibre-Cut Discs
1 x	Fibre-Cut Discs
1 x	Fibre-Cut Discs
1 x	ESD Tweezers 5-193
1 x	ESD Tweezers 5-194
1 x	Conj 5 pinças ESD
2 x	Cut off/mitre saw KGS 80
2 x	Safety Insulated Pozidriv Screwdriver 14-643VDE
1 x	Precision quick-action drill chuck 0-10mm B16
2 x	Scroll saw DS 230/E
1 x	Motor-driven carving device MSG
1 x	Bench Circular Saw KS 230
1 x	MICRO Band Saw MBS 240/E
1 x	OPTI BF16 Vario
3 x	3-jaw chuck centrically clamping 80mm
1 x	Grinding mop cylinder grit 80
2 x	6-piece screwdriver and cross-recess set
1 x	Grinding mop cylinder grit 120
1 x	Precision lathe PD 250/E
1 x	EUROline side cutter pointed head
1 x	BIT-SET
2 x	BeeHive208S
1 x	ESD-handling set
2 x	MICROMOT glue gun HKP 220
3 x	HSS twist drill set with centring pin
3 x	HSS drill bits 1.6mm
2 x	EUROline-Conductive set of pliers
2 x	HSS drill bits 1.0mm
2 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Mini side cutters EUROline-Conductive
2 x	MICRO Heat gun MH 550
2 x	MICROFLAME burner MFB/E
2 x	Engraving tool GG
1 x	Flat nose pliers 45º EUROline-Conductive
2 x	End side cutters EUROline-Conductive
1 x	Tungsten carbide drills Ø1,5mm
3 x	HSS twist drill set to DIN 338
1 x	Snipe nose pliers 45º EUROline-Conductive
2 x	Tungsten carbide drills Ø2mm
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
2 x	Mini side cutters EUROline-Conductive
2 x	Side cutters EUROline-Conductive
2 x	Router base OFV
2 x	HSS drill bits 0.5mm
2 x	Round nose pliers 45º EUROline-Conductive
2 x	Universal holder UHZ
1 x	MICRO-screwdrivers
1 x	Safety Insulated Phillips Screwdriver 14-634VDE
2 x	Lathe tools 10mm pastilhados
1 x	Lathe tools 8mm pastilhados
2 x	lathe tools 10mm
2 x	Cutting tool HM 20 mm
2 x	HSS drill bits 1.2mm
1 x	Hot wire cutter THERMOCUT 650
1 x	3-jaw chuck centrically clamping 160mm
1 x	3-jaw chuck centrically clamping 125mm
1 x	HSS drill bits 0.8mm
1 x	Tungsten carbide drills Ø1mm
1 x	Cylinder sander WAS/E
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	VASELINE 200ml
1 x	TOP-PIN 200ml
1 x	SPRAYOIL 200ml
1 x	MULTI 200ml
1 x	SILICONE 200ml
1 x	End side cutters 45º EUROline-Conductive
1 x	SmartProg2
1 x	Cutting tool 8 mm
1 x	Safety Insulated Pozidriv Screwdriver 14-642VDE
1 x	Cutting tool 16 mm
1 x	MICRO Miller FF 500
1 x	Cutting tool 10 mm
1 x	lathe tools 12mm
1 x	Safety Insulated Pozidriv Screwdriver 14-644VDE
1 x	Sanding Discs
1 x	Sanding Drums
1 x	Nylon Fleece Brushes
1 x	Flap Wheels
1 x	Sanding Drums
1 x	Precision Vice FMZ
2 x	BGA-0246/0243
1 x	BGA-Bottom-115
2 x	BGA-Bottom-10
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-6
1 x	BeeHive204
2 x	BGA-Bottom-11
1 x	DIL44/TSOP44-II ZIF 400mil
1 x	DIL40/TSOP40 ZIF 18.4mm
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-5
1 x	BGA-Bottom-102
2 x	BGA-0245/0242
1 x	DIL48/TSOP48 ZIF 18.4mm
1 x	DIL28/TSOP28 ZIF 11,8mm Flash
1 x	Precision caliper square
2 x	BGA-Bottom-1
1 x	BGA-Bottom-106
1 x	DIL48/TSOP48 ZIF 15.4mm
1 x	Precision caliper 500mm
1 x	Bottom PSOP44 NOR-2
1 x	BGA-Bottom-118
1 x	Blade for Steel and brass
1 x	DIL28/TSOP28 ZIF 11.8 mm
1 x	BGA-Bottom-111
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-3
1 x	DIL40/TSOP40 ZIF 18.4mm Flash-1
1 x	BGA-Bottom-108
1 x	BGA-Bottom-103

€40,422.32