€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

1 x	surface planing and thicknessing ADH 250
2 x	Table Sawr TKS 315 E
1 x	Super-Cut
1 x	Cutting disc, with reinforcement
1 x	Bench drill press TBH
1 x	Mill/Drill System BFW 40/E
1 x	Edge cutter with pin 6.4mm
1 x	Professional Drill/Grinder IBS/E
1 x	Grinding mop cylinder grit 120
1 x	Multipurpose Vices Primus100
1 x	10-piece wood router cutter set
1 x	MICROMOT 50
1 x	Slot cutter 5.0mm
2 x	Pinça SOIC de 8 pinos
1 x	Rebating cutter 6.4mm
1 x	Tungsten Carbide Tipped (TCT)
1 x	Long neck straight drill/grinder LB/E
1 x	Half round cutter 13mm
2 x	Grinding mop cylinder grit 240
1 x	MICRO Miller MF 70
1 x	Replacement carving blades for MSG
1 x	V-slot cutter 6.5mm
1 x	Multiform grindstone
1 x	MICROMOT 50/E
1 x	Precision Vice FMZ
1 x	Combi cutter 6.5/2.5mm
1 x	Slot cutter 6.5mm
1 x	Five piece HSS chisel set
1 x	MICROMOT 50/EF
1 x	Machine Vice MS 4
1 x	Angle cutter 45 °
1 x	MICROMOT 230/E
1 x	MICRO Miller FF 230
1 x	Core box bit 3.2mm
1 x	Replacement glue sticks for HKP 220
1 x	IC Test clip 20 pins
1 x	Multipurpose Vices Primus 75
1 x	Precision steel vice PM 40
1 x	Precision Drill/Grinder FBS 240/E
1 x	Grinding mop cylinder grit 80
1 x	Long neck angle milling/drilling unit LWB 220/E
1 x	Independent four jaw chuck for the DB 250
1 x	Bench drill machine TBM 220
1 x	Grinding mop cylinder grit 120
1 x	Precision Vice FMS 75
1 x	Precision drill grinder FBS 12/EF
1 x	Rounding over cutter 6.4mm
1 x	MICRO Miller FF 500
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Jig saw blades made of HSS
1 x	Diamond-coated cutting disc for MIC
1 x	MICROMOT Mains Adapter NG 2/S
3 x	Insulation Resistance Tester MG125
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Supercut jig saw blades of special steel
2 x	Insulation Resistance Tester MG500
1 x	Vacum SAA 901
1 x	surface planing and thicknessing ADH 200
1 x	MICROMOT Mains Adapter NG 5/E
1 x	4-jaw chuck individually clamping 80mm
1 x	centrically clamping 125mm
2 x	Precision quick-action drill chuck 0-13mm B16
1 x	Polishing felt, medium hard
1 x	3-jaw chuck centrically clamping 160mm
1 x	sandpaper for PS 13 Grot 180
1 x	3-jaw chuck centrically clamping 125mm
1 x	sandpaper for PS 13 Grit 240
1 x	Dial gauge
1 x	Morse taper MT2 - B16
2 x	Precision quick-action drill chuck 0-8mm B16
1 x	4-jaw chuck individually clamping 125mm
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	3-jaw chuck centrically clamping 80mm
1 x	centrically clamping 100mm
1 x	CM2 - B16 - M10
1 x	4-jaw chuck individually clamping 100mm
1 x	Precision magnetic gauge stand
1 x	sandpaper for PS 13 Grit 400
2 x	Precision quick-action drill chuck 0-10mm B16
2 x	Precision quick-action drill chuck 0-16mm B16
1 x	Morse taper MT3 - B16
1 x	3-jaw chuck centrically clamping 100mm
1 x	ESD Tweezers 5-195
1 x	ESD Tweezers 5-193
2 x	ESD-handling set
1 x	ESD Brushe
1 x	ESD Brushe
1 x	End side cutters EUROline-Conductive
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Round nose pliers 45º EUROline-Conductive
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	ESD Tweezers 5-194
2 x	ESD-handling ser 9-361
1 x	ESD Tweezers 5-191
1 x	ESD Tweezers 5-192
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	BGA-Bottom-125
1 x	BGA-Bottom-111
1 x	6-piece TORX-screwdriver-set ESD
1 x	6-piece screwdriver and cross-recess set ESD
1 x	BGA-Bottom-101
1 x	BGA-Bottom-108
1 x	Contact bracelet with spiral cord
1 x	Cross-recess Screwdrivers 00
1 x	Cross-recess Screwdrivers 1
1 x	BIT-SET
1 x	BeeHive208S
1 x	BGA-0246/0243
1 x	Crocodile clip
1 x	Earthing module
1 x	BeeHive204
1 x	BGA-0246/0244
1 x	Cross-recess Screwdrivers 2
1 x	BGA-Bottom-103
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	BGA-Bottom-1
1 x	Crimping plier for BNC
1 x	Brass contact cleaner brush
1 x	Earth wire
1 x	6-piece socket wrenches ESD
1 x	BGA-Bottom-118
1 x	Earth wire with dummy Schunko-plug
1 x	End side cutters 45º EUROline-Conductive
1 x	6-piece set of ESD/EGB tweezers
1 x	Earth wire
1 x	BGA-Bottom-11
1 x	Cross-recess Screwdrivers Pozidriv 2

€23,758.07