€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

1 x	ESD Tweezers 5-194
1 x	Mini side cutters EUROline-Conductive
1 x	ESD Brushe
1 x	ESD Tweezers 5-193
1 x	Mini side cutters EUROline-Conductive
1 x	6-piece screwdriver and cross-recess set ESD
1 x	Mini side cutters EUROline-Conductive
1 x	ESD Tweezers 5-191
1 x	ESD-handling ser 9-361
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
2 x	Side cutters EUROline-Conductive
1 x	ESD Tweezers 5-195
1 x	ESD Brushe
2 x	RT200 - Horizontal-vertical circular dividing table
1 x	ACCENT SERVICE TOOLS SET
1 x	Brass contact cleaner brush
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
2 x	End side cutters EUROline-Conductive
1 x	ESD-handling set
1 x	6-piece set of ESD/EGB tweezers
2 x	RT150 - Horizontal-vertical circular dividing table
2 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
2 x	IT 200 - Indirect dividing attachment
1 x	ESD Tweezers 5-192
3 x	precision machine vices FMS150
1 x	End side cutters 45º EUROline-Conductive
2 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	6-piece TORX-screwdriver-set ESD
1 x	6-piece socket wrenches ESD
1 x	4-jaw chuck individually clamping 125mm
1 x	Precision magnetic gauge stand
1 x	4-jaw chuck individually clamping 80mm
1 x	Morse taper MT2 - B16
1 x	Dial gauge
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	centrically clamping 100mm
1 x	CM2 - B16 - M10
1 x	3-jaw chuck centrically clamping 125mm
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	centrically clamping 125mm
1 x	3-jaw chuck centrically clamping 100mm
1 x	4-jaw chuck individually clamping 100mm
1 x	Precision quick-action drill chuck 0-16mm B16
1 x	3-jaw chuck centrically clamping 160mm
1 x	3-jaw chuck centrically clamping 80mm
1 x	Precision quick-action drill chuck 0-13mm B16
1 x	Morse taper MT3 - B16
1 x	Precision quick-action drill chuck 0-8mm B16
1 x	Polishing felt, medium hard
1 x	DIL16W/SOIC16 ZIF 300mil
1 x	DIL20/SOIC20 ZIF 300 mil
1 x	IT 150 - Indirect dividing attachment
1 x	DIL16/SOIC16 ZIF 200 mil
1 x	DIL3/SOT23-3 ZIF-CS
1 x	DIL14W/SOIC14 ZIF 150mil
1 x	DIL40/SOIC20 ZIF AWM-1
1 x	DIL28W/SOIC28 ZIF 300mil
1 x	DIL40/SOIC16 ZIF MB-1
1 x	DIL16/SOIC16-1 ZIF 170mil
1 x	DIL20W/SOIC20 ZIF 300mil
1 x	DIL44/SOIC44 ZIF-CS
1 x	DIL16W/SOIC16 ZIF 150mil
1 x	RT100 - Horizontal-vertical circular dividing table
1 x	DIL18W/SOIC18 ZIF 300mil
1 x	DIL32/SOIC32 ZIF 445mil
1 x	DIL24W/SOIC24 ZIF 300mil
1 x	DIL28/SOIC28 ZIF 330 mil
1 x	DIL32/SOIC32 ZIF 300 mil
1 x	DIL40/SOIC20 ZIF MB95-1
1 x	DIL40/SOIC28 ZIF AWM-1
1 x	DIL20/SOIC20 ZIF 200mil
1 x	Cylindrical cutters
1 x	DIL40/PLCC52 ZIF AWM-1
1 x	Glass fibre contact cleaner brush
1 x	DIL48/QFN48 ZIF-CS
1 x	DIL28/QFN28-2 ZIF-CS
1 x	DIL40/PLCC44 ZIF AWM-1
1 x	DIL40/PLCC68 ZIF AWM-1
1 x	Footswitch FS
1 x	Disc cutters
1 x	DIL32/PLCC84 ZIF HS3334ESCF1H
1 x	DIL40/SDIP52 ZIF 55x
1 x	DIL20W/PLCC20 ZIF
1 x	DIL8/QFN8-1 ZIF-CS
1 x	DIL40/PLCC28 ZIF AWM-1
2 x	Diamond Cutting Discs
2 x	DIL32/PLCC32 ZIF
1 x	DIL40/PLCC52 ZIF MCS51-2
1 x	DIL32/PLCC32 ZIF-CS
1 x	DIL28/PLCC28 ZIF
1 x	DIL32/SDIP64-1 ZIF Toshiba-BM1136
1 x	DIL42/SDIP42 ZIF 600mil
2 x	Diamond Cutting Discs
1 x	DIL32/PLCC32 ZIF-CS NOR-1
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	Diamond Cutting Discs
1 x	Delta sander OZI/E
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x	Diamond Grinding Bits 5mm
1 x	Diamond Grinding Bits 1,8mm
1 x	Diamond Cutting Discs
2 x	Crimping plier for BNC
1 x	precision machine vices FMS125
1 x	DIL24/TSSOP24 ZIF 170mil
1 x	Precision lathe PD 250/E
1 x	Disc Sander TG 250/E
1 x	DIL28/TSSOP28 ZIF 170mil
1 x	DIL28/PLCC84 ZIF HS538ESC01H
2 x	Diamond Coated
1 x	DIL28/PLCC28 ZIF-CS
2 x	Slot cutter 5.0mm
2 x	Diamond cutting blade for OZI
1 x	DIL40/MLF64 ZIF-CS AVR-1
1 x	BIT-SET
1 x	DIL32/SDIP64 ZIF H8-1
1 x	DIL44/MLF44-1 ZIF-CS
1 x	precision machine vices FMS100
1 x	Diamond blade for MBS 240/E
1 x	DIL20/PLCC20 ZIF-CS
1 x	DIL40/PLCC68 ZIF DS87C550
1 x	Diamond blade
1 x	DIL32/MLF32-1 ZIF
1 x	Diamond Grinding Bits 1,8mm
1 x	DIL48/SDIP56 ZIF 68HC05Bx
1 x	Disc Sander TG 125/E
1 x	DIL40/PLCC52 ZIF DS87C530
1 x	DIL40/PLCC44 ZIF W-EPROM / MCS51
1 x	Diamond-coated cutting disc for MIC
1 x	Diamond Twist Drills
1 x	DIL40/PLCC44 ZIF PIC-1
2 x	Three piece thread cutting set
1 x	DIL28/PLCC32 ZIF EPROM
2 x	Diamond-coated cutting and roughing disc
1 x	DIL44/QFN44-2 ZIF-CS
1 x	DIL40/PLCC52 ZIF AWM-2
1 x	DIL32/SDIP32 ZIF 400mil
1 x	Diamond Grinding Bits 1mm
1 x	Corundum sanding discs for LWS
2 x	BGA-0245/0243
1 x	BGA-Bottom-115
1 x	Five piece HSS chisel set
1 x	Flexible silicon discs
1 x	BGA-Bottom-105
1 x	BGA-Bottom-102
1 x	Flexible polishing pad set
2 x	BeeProg2
1 x	High quality corundum grinding bits
1 x	Half round cutter 13mm
1 x	IC Test clip 20 pins
1 x	BGA-Bottom-101
1 x	Replacement carving blades for MSG
1 x	Fibre-Cut Discs
1 x	HSS drill bits 1.2mm
1 x	Tungsten carbide drills Ø1mm
1 x	Flap Wheels
1 x	High quality corundum grinding bits
2 x	BGA-Bottom-103
1 x	Bench drill press TBH
1 x	Flexible silicon discs
1 x	Super-fine sanding discs grain 000
1 x	BGA-Bottom-11
1 x	BGA-Bottom-127
2 x	Pinça SOIC de 8 pinos
1 x	BGA-Bottom-111
1 x	BGA-0246/0244
1 x	Flexible polishing pad set
1 x	Tungsten carbide drills Ø2mm
1 x	Slot cutter 6.5mm
1 x	V-slot cutter 6.5mm
1 x	Sanding fleece for LWS
1 x	BGA-Bottom-126
1 x	Flexible silicon discs
1 x	HSS cutting blade for OZI
2 x	BGA-Bottom-1
1 x	Professional set for finish grinding and polishing
1 x	Super-fine sanding discs grain 400
1 x	Super safety and specialty bit set, 75-piece
1 x	10-piece wood router cutter set
1 x	Beeprog2C
1 x	Metal Cutting Blades
1 x	HSS drill bits 1.0mm
1 x	Fibre-Cut Discs
1 x	Tungsten carbide drills Ø1,5mm
1 x	Tungsten Carbide Tipped (TCT)
1 x	BGA-Bottom-118
1 x	Corundum fan sander for LWS
1 x	Thicknesser DH 40
1 x	BGA-Bottom-108
1 x	Nylon Fleece Brushes
1 x	BGA-Bottom-106
1 x	BeeHive208S
1 x	Edge cutter with pin 6.4mm
1 x	HSS drill bits 0.8mm
1 x	Corundum grinding disc for LWS
1 x	Corundum grinding disc for LWS
1 x	BGA-0245/0241
1 x	Sanding Drums
1 x	Fibre-Cut Discs
1 x	Core box bit 3.2mm
1 x	BeeHive204
1 x	Lambswool polishing disc
1 x	BGA-Bottom-10

€34,595.00