€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

2 x	sanding belts for BBS/s Grit 150
2 x	sanding belts for BBS/s Grit 80
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Machine Vice MS 4
1 x	Multipurpose Vices Primus 75
1 x	sandpaper for PS 13 Grit 240
1 x	MICROMOT Mains Adapter NG 2/E
1 x	sandpaper for PS 13 Grit 400
1 x	Multipurpose Vices Primus100
1 x	sanding belts for BBS/s Grit 240
1 x	Precision Vice FMS 75
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Precision Vice FMZ
1 x	sandpaper for PS 13 Grot 180
2 x	Fibre-Cut Discs
1 x	Edge cutter with pin 6.4mm
1 x	Fine dust paper filter for CW-matic
1 x	Band knife of hardened spring band steel (without teeth)
1 x	14-piece parallel supports set
1 x	Fibre-Cut Discs
3 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Belt sander BBS/S
1 x	Blade for Steel and brass
1 x	2-speed scroll saw DSH
1 x	Belt sander BS/E
4 x	Tungsten Carbide Tipped (TCT)
3 x	Bench drill machine TBM 220
1 x	Angle polisher WP/E
1 x	Aluminium Die-Cast
3 x	MICROFLAME burner MFB/E
1 x	Fixed Steady
3 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Fibre-Cut Discs
3 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
5 x	Bench drill press TBH
1 x	Angle cutter 45 °
1 x	Felt polishers
1 x	Fibre-Cut Discs
2 x	Ball-shaped diamond coated 1.2mm
2 x	Ball-shaped diamond coated 2.2mm
2 x	Felt polishers
1 x	Bench Circular Saw KS 230
2 x	10-piece wood router cutter set
1 x	Ball shaped milling cutters
1 x	Ball-shaped diamond coated 3.2mm
4 x	Router base OFV
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Backing disc for LWS
2 x	Fibre-Cut Discs
4 x	Diamond Coated
1 x	Flame shaped milling cutters
2 x	MICROMOT 50
1 x	Felt polishers
1 x	Felt polishers
1 x	Fibre-Cut Discs
4 x	Chuck for TBM 220
3 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	Disc Sander TG 250/E
1 x	Disc cutters
2 x	Diamond cutting blade for OZI
1 x	Disc Sander TG 125/E
1 x	Diamond blade
1 x	Diamond-coated cutting and roughing disc
1 x	Cylindrical cutters
1 x	Glass fibre contact cleaner brush
2 x	Diamond Cutting Discs
1 x	Diamond-coated cutting disc for MIC
2 x	Diamond Grinding Bits 1,8mm
1 x	Long neck angle grinder LHW
1 x	Delta sander OZI/E
1 x	Diamond blade for MBS 240/E
1 x	Diamond Grinding Bits 5mm
2 x	Complete Engraving Kit with trial glass
2 x	Corundum sanding discs for LWS
1 x	Glass fibre contact cleaner brush
2 x	MICROFLAM gas soldering set MGS
2 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
2 x	Corundum fan sander for LWS
2 x	Diamond Cutting Discs
2 x	Drill chuck with sliding sleeve for the tailstock
1 x	Diamond Grinding Bits 1,8mm
1 x	Diamond Cutting Discs
2 x	Diamond Twist Drills
1 x	Diamond Grinding Bits 1mm
1 x	Brass contact cleaner brush
1 x	Diamond Cutting Discs
1 x	Protective device for hand-operated MICROMOT
1 x	Replacement belts for BSL 220/E
1 x	Super-fine sanding discs grain 400
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	MICRO Miller FF 230
1 x	Super-fine sanding discs grain 2000
2 x	Cutting disc, with reinforcement
1 x	HSS cutting blade for OZI
1 x	Sanding fleece for LWS
2 x	High quality corundum grinding bits
1 x	Sanding fleece for LWS
1 x	Flexible silicon discs
1 x	Long neck straight drill/grinder LB/E
2 x	Flap Wheels
1 x	HSS twist drill set to DIN 338
1 x	Precision Drill/Grinder FBS 240/E
2 x	Sanding Drums
1 x	Flexible silicon discs
1 x	Mill/Drill Unit BFB 2000.
2 x	Sanding Drums
2 x	Sanding bands 14x13mm
1 x	Collet Set for accurate use on round components
1 x	MICROMOT 50/E
1 x	Professional Drill/Grinder IBS/E
1 x	MICROMOT drill stand MB 200
1 x	MICROMOT 50/EF
1 x	Flexible silicon discs
1 x	MICRO Miller FF 500
2 x	Corundum bound cutting disc for LWS
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
2 x	Sanding Discs
1 x	MICRO Miller MF 70
1 x	Super-fine sanding discs grain 000
1 x	Replacement belts for BSL 220/E
2 x	Super-Cut
2 x	High quality corundum grinding bits
1 x	Replacement belts for BSL 220/E
1 x	Wolfram vanadium steel milling bits
1 x	MICROMOT 230/E
1 x	Micro Compound Table KT 70
1 x	Wolfram vanadium steel milling bits
1 x	Mill/Drill System BFW 40/E
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Corundum grinding disc for LWS
1 x	Motor-driven carving device MSG
1 x	Pensander PS 13
1 x	Three jaw chuck for the lathe DB 250
1 x	Cylinder shaped milling cutters
1 x	Universal and oil siphoning pump AP 12
1 x	Three-jaw steel drill chuck
1 x	Corundum grinding disc for LWS
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Cotton polishers
1 x	Core box bit 3.2mm
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Five piece HSS chisel set
2 x	Conjunto de três brocas de ponto
1 x	Cotton polishers
1 x	Replacement belts for BSL 220/E
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
2 x	Flap Wheels
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Dividing attachment TA 230 for PF 250
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Cups brushes
1 x	Corundum fan sander for LWS
2 x	Independent four jaw chuck for the DB 250
1 x	Cotton polishers
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Crosscut 'Super-Cut' blade
1 x	Cut off/mitre saw KGS 80
1 x	Engraving tool GG
1 x	Corundum sanding discs for LWS
1 x	Centre Turning Attachment
1 x	DIL20W/PLCC20 ZIF
1 x	DIL40/PLCC44 ZIF AWM-1
1 x	DIL28/PLCC28 ZIF
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	DIL40/TQFP64 ZIF CC-1
1 x	DIL40/TQFP64 ZIF EM652X
1 x	High quality corundum grinding bits
1 x	PRECISION WIRE STRIPPER ESD-PLUS
1 x	6-piece set of ESD/EGB tweezers
1 x	High quality corundum grinding bits
1 x	Tungsten carbide drills Ø1mm
1 x	DIL40/PLCC68 ZIF DS87C550
1 x	ESD Tweezers 5-191
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	DIL40/PLCC44 ZIF W-EPROM / MCS51
1 x	DIL48/TQFP100 ZIF PLD-2
1 x	DIL40/TQFP44-1 ZIF MCS51
1 x	DIL32/PLCC32 ZIF-CS
1 x	DIL44/TQFP44-2 ZIF
1 x	ESD Tweezers 5-193
1 x	DIL40/TQFP64 ZIF AVRmega-2
1 x	HSS drill bits 1.0mm
1 x	DIL44/TQFP44-1 Zif
1 x	Conj 5 pinças ESD
1 x	DIL40/PLCC52 ZIF AWM-2
1 x	DIL32/PLCC32 ZIF-CS NOR-1
1 x	DIL48/TQFP48-1 ZIF
1 x	ESD Tweezers 5-195
1 x	HSS drill bits 1.6mm
1 x	Sanding Drums
1 x	DIL40/PLCC52 ZIF MCS51-2
1 x	DIL20/PLCC20 ZIF-CS
1 x	ESD Tweezers 5-192
1 x	DIL40/TQFP80-1 ZIF AWM-1
1 x	DIL40/TQFP52 ZIF EM652X
1 x	DIL40/PLCC52 ZIF DS87C530
1 x	DIL28/PLCC84 ZIF HS538ESC01H
1 x	EUROline-Conductive set of pliers
1 x	DIL44/TQFP44-3 ZIF
1 x	DIL40/PLCC68 ZIF AWM-1
1 x	DIL32/PLCC84 ZIF HS3334ESCF1H
1 x	DIL28/PLCC28 ZIF-CS
1 x	DIL48/TQFP100 ZIF ST92Fxxx
1 x	DIL48/TQFP144 ZIF ST10-1
1 x	Sanding bands 14x13mm
1 x	HSS drill bits 1.2mm
1 x	DIL28/PLCC32 ZIF EPROM
1 x	DIL40/PLCC44 ZIF PIC-1
1 x	High quality corundum grinding bits
1 x	Tungsten carbide drills Ø1,5mm
1 x	Slot cutter 3.2mm
1 x	DIL40/TQFP80-1 ZIF PIC-1A
2 x	ESD Tweezers 5-194
1 x	DIL32/PLCC32 ZIF
1 x	DIL40/PLCC28 ZIF AWM-1
1 x	DIL40/TQFP44 ZIF EM652X
1 x	High quality corundum grinding bits
1 x	Sanding Discs
1 x	Tungsten carbide drills Ø2mm
1 x	DIL40/TQFP64 ZIF PIC-1A
1 x	DIL48/TQFP100-2 ZIF PLD-1
1 x	DIL40/TQFP44 ZIF AWM-1
1 x	ACCENT SERVICE TOOLS SET
1 x	Sanding Drums
1 x	DIL40/PLCC52 ZIF AWM-1
1 x	HSS drill bits 0.5mm
1 x	HSS drill bits 0.8mm
1 x	HSS twist drill set with centring pin
1 x	DIL40/TQFP44 ZIF PIC-1
1 x	DIL8/QFN8-1 ZIF-CS
1 x	DIL28/QFP52 ZIF-CS SX52
1 x	BGA-Bottom-106
1 x	BeeHive204
1 x	BGA-Bottom-108
1 x	BGA-0246/0243
1 x	DIL48/QFP100 ZIF MSP430-1
1 x	DIL44/PSOP44 ZIF 600 mil
2 x	Precision quick-action drill chuck 0-10mm B16
1 x	DIL48/QFP100 ZIF PLD-1
1 x	DIL40/QFP64-3 ZIF NEC-1
1 x	Bottom PSOP44 NOR-2
1 x	DIL40/QFP100 ZIF AVR-1
1 x	DIL8/SOT23-6 ZIF-CS PIC
1 x	DIL40/QFP64-4 ZIF NEC-1
1 x	DIL48/MQFP80 ZIF C164
1 x	BGA-Bottom-105
1 x	DIL28/QFN28-2 ZIF-CS
1 x	BGA-0245/0243
1 x	DIL28/QFP64 ZIF H8/3644

€25,287.18