Top » Catalog » Elnec » 60-0053

€3,320.00 + VAT

BeeHive204
[60-0053]

BeeHive204

BeeHive204

Extremely fast universal 4x 48-pindrive concurrent production programmer (multiprogramming system).

 
Short description:

  • supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
  • four independent universal programming modules (BeeProg2 based) in one unit
  • two BeeHive204 multiprogrammers can be attached to one PC to better utilize programming workplace
  • extremely fast programming, one of the fastest programmers in this category. Programs 64Mbit NOR Flash memory less than 9 seconds and 1Gbit NAND Flash less than 70 sec.
  • powerful independent pin driver circuit for each and every pin of the programmer
  • in-circuit programming capability through ISP connector
  • Very low voltage support for latest Flash memory chips
  • ESD protection on each pin of the sockets
  • USB (up to 480 Mbit/s) interface to PC
  • comfortable and easy to use control program, Windows 98/Me/NT/2000/XP/2003/XPx64/Vista/7 compatible
  • unique quick reaction to customer's needs - software update can be ready within a day from request by OnDemand software
  • approved by CE laboratory to meet CE requirements
  • made in Slovakia
  • warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive204/

Reviews
Manufacturers
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Insulation Resistance Tester MG125
1 x DIL40/QFP64 ZIF LPC-1
1 x DIL48/QFP100 ZIF PLD-4
2 x Hot wire cutter THERMOCUT 650
1 x DIL24/TSSOP24 ZIF 170mil
1 x DIL28/TSSOP28 ZIF 170mil
1 x DIL28/QFN28-2 ZIF-CS
1 x DIL28/PLCC28 ZIF-CS
1 x DIL40/QFP64-3 ZIF NEC-1
1 x DIL48/PQFP100 ZIF ST92Fxxx
1 x DIL44/QFN44-2 ZIF-CS
1 x DIL40/PLCC68 ZIF AWM-1
1 x DIL48/QFP100 ZIF NEC-2
2 x surface planing and thicknessing ADH 200
1 x DIL48/PQFP100 ZIF PLD-1
1 x DIL20/PLCC20 ZIF-CS
1 x DIL40/QFP80 ZIF M37702
1 x Broca de alta duração de 2.7mm
1 x Broca de alta duração de 2.8mm
1 x DIL28/PLCC84 ZIF HS538ESC01H
1 x Broca de alta duração de 2.9mm
1 x DIL40/PLCC52 ZIF MCS51-2
1 x Hot wire cutter THERMOCUT 12/E
1 x Broca de alta duração de 2.6mm
1 x DIL48/QFN48 ZIF-CS
1 x DIL40/QFP144 ZIF H8S-1
1 x DIL40/PLCC44 ZIF AWM-1
1 x DIL40/QFP64-2 ZIF-CS NEC-1
1 x DIL40/QFP144 ZIF LPC-1
1 x DIL32/PLCC32 ZIF-CS
1 x DIL48/PQFP80 ZIF M58BW-1
1 x DIL32/PLCC32 ZIF
1 x DIL48/PQFP100 ZIF ST10-1
1 x Broca de alta duração de 2.4mm
1 x DIL48/QFP100 ZIF PLD-3
1 x DIL40/QFP64-1 ZIF-CS NEC-1
1 x ESD Brushe
1 x Broca de alta duração de 2.3mm
1 x DIL32/QFP64 ZIF H8-1
1 x DIL8/QFN8-1 ZIF-CS
1 x DIL32/PLCC32 ZIF-CS NOR-1
2 x Super safety and specialty bit set, 75-piece
1 x DIL28/QFP52 ZIF-CS SX52
1 x DIL48/QFP100 ZIF PLD-2
1 x DIL40/QFP100 ZIF AVR-1
1 x DIL40/PLCC52 ZIF DS87C530
1 x ESD Brushe
1 x DIL40/PLCC28 ZIF AWM-1
1 x DIL48/QFP100 ZIF MSP430-1
1 x Broca de alta duração de 2.1mm
2 x Bottom PSOP44 NOR-1
1 x DIL28/QFP64 ZIF H8/3644
1 x DIL28/PLCC32 ZIF EPROM
1 x DIL40/QFP64-4 ZIF NEC-1
1 x DIL48/QFP100 ZIF MB90F-1
1 x DIL40/PLCC44 ZIF W-EPROM / MCS51
1 x DIL48/PQFP144 ZIF ST10-1
1 x DIL32/PLCC84 ZIF HS3334ESCF1H
1 x MICROMOT glue gun HKP 220
1 x DIL40/PLCC52 ZIF AWM-2
1 x DIL40/PLCC52 ZIF AWM-1
1 x DIL20W/PLCC20 ZIF
1 x DIL48/LQFP64 ZIF M16C/Tiny
1 x DIL40/PLCC44 ZIF PIC-1
1 x DIL48/LQFP64 ZIF M38039/M39049
1 x DIL40/PLCC68 ZIF DS87C550
1 x Broca de alta duração de 2.2mm
1 x DIL48/QFP100 ZIF NEC-1
2 x PRECISION WIRE STRIPPER ESD-PLUS
1 x DIL28/PLCC28 ZIF
1 x DIL48/QFP100 ZIF PLD-1
1 x Broca de alta duração de 3.0mm
1 x Universal and oil siphoning pump AP 12
1 x Hot wire cutter THERMOCUT 230/E
1 x DIL48/TSOP48 ZIF 18.4mm
2 x Sanding pads for OZI 220/E grit 80
1 x Top PSOP44 ZIF 600mil
2 x Diamond cutting blade for OZI
1 x DIL32/TSOP32 ZIF 11.8mm
1 x DIL40/TSOP40 ZIF 18.4mm
1 x DIL40/TSOP40 ZIF-CS 12.4mm
1 x DIL32/TSOP32 ZIF 18.4mm Flash
1 x DIL28/TSOP28 ZIF 11,8mm Flash
1 x Bottom PSOP44 NOR-3
1 x DIL48/TSOP56 ZIF 18.4mm Flash-3
1 x DIL40/MQFP52 ZIF ADuC812
1 x BIT-SET
1 x SCLCR1010E06
2 x Tungsten carbide cutters set
3 x Chuck for TBM 220
2 x Sanding pads for OZI 220/E grit 240
1 x Three jaw chuck for the lathe DB 250
1 x Bottom PSOP44 NOR-2
1 x Drill chuck with sliding sleeve for the tailstock
2 x Sanding pads for OZI 220/E grit 150
3 x Micro Compound Table KT 70
1 x DIL48/MQFP80 ZIF C500
2 x HSS immersion saw blades for OZI
1 x DIL48/MQFP80 ZIF C164
1 x sanding belts for BBS/s Grit 240
1 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x Step clamps made of steel
1 x DIL40/TSOP40 ZIF 18.4mm Flash-1
1 x DIL48/TSOP56 ZIF 18.4mm Flash-6
1 x DIL32/TSOP32 ZIF 12.4mm Flash
1 x DIL28/TSOP28 ZIF 11.8 mm
1 x DIL48/TSOP56 ZIF 18.4mm Flash-5
1 x DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x Broca de ponto 3.15 x 1.25
1 x broca de alta duração de 0,2mm
1 x DIL48/TSOP56 ZIF 18.4mm Flash-2
1 x sclcr2525M12
1 x DIL44/PSOP44 ZIF 600 mil
1 x DIL44/TSOP44-II ZIF 400mil
1 x DIL32/TSOP32 ZIF 18.4mm Flash
1 x DIL48/TSOP56 ZIF 18.4mm Flash-1
2 x HSS immersion saw blades for OZI
1 x Insert CCGT120404-AK
1 x DIL48/TSOP48 ZIF 15.4mm
1 x Insert CCGT060202-AK
2 x Precision steel vice PM 40
2 x HSS cutting blade for OZI
1 x DIL40/MLF64 ZIF-CS AVR-1
1 x Mini side cutters EUROline-Conductive
1 x Snipe nose pliers 45º EUROline-Conductive
1 x Snipe nose pliers 45º EUROline-Conductive
1 x Side cutters EUROline-Conductive
1 x Mini side cutters EUROline-Conductive
1 x Mini side cutters EUROline-Conductive
1 x Snipe nose pliers 45º EUROline-Conductive
1 x Flat nose pliers 45º EUROline-Conductive
1 x DIL32/MLF32-1 ZIF
1 x End side cutters 45º EUROline-Conductive
1 x DIL44/MLF44-1 ZIF-CS
1 x End side cutters EUROline-Conductive
1 x EUROline-Conductive set of pliers
1 x surface planing and thicknessing ADH 250
1 x Round nose pliers 45º EUROline-Conductive
1 x Machine Vice MS 4
1 x Cutting disc, with reinforcement
1 x 6-piece socket wrenches ESD
1 x BeeHive208S
1 x BGA-Bottom-108
1 x Hand magnifier with LED light 3X
1 x BGA-Bottom-111
2 x magnifier 3.25 x Ø 45mm with additional lens
1 x DIL44/TQFP44-3 ZIF
1 x 6-piece wrench key set ESD
1 x BGA-0245/0241
1 x Screwdriver bit set. 49-piece.
1 x DIL40/TQFP64 ZIF AVRmega-2
1 x DIL44/TQFP44-1 Zif
1 x DIL44/TQFP44-2 ZIF
1 x DIL48/TQFP144 ZIF ST10-1
1 x DIL40/TQFP80-1 ZIF AWM-1
1 x BGA-0245/0242
1 x BGA-0245/0243
1 x BGA-Bottom-10
1 x DIL48/TQFP48-1 ZIF
1 x BGA-Bottom-1
1 x Hand Magnifier 2-293
1 x Plastic magnifying glass
1 x BGA-Bottom-102
1 x BGA-Bottom-103
1 x BGA-Bottom-106
1 x BGA-0246/0244
1 x 6-piece TORX-screwdriver-set ESD
1 x DIL40/TQFP64 ZIF EM652X
1 x STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x DIL40/TQFP52 ZIF EM652X
1 x BGA-Bottom-101
1 x DIL40/TQFP80-1 ZIF PIC-1A
1 x DIL48/TQFP100 ZIF ST92Fxxx
€32,247.56
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Elnec
Elnec Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook