€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

1 x	Bench drill press TBH
1 x	MICROMOT 230/E
1 x	IC tweezers
1 x	MICRO Miller MF 70
1 x	Broca de ponto 3.15 x 1.25
1 x	Long neck straight drill/grinder LB/E
1 x	MICROMOT 50/EF
1 x	MICRO Miller FF 230
1 x	PLCC Extractor
1 x	Mill/Drill System BFW 40/E
1 x	Cutter head for copy and surface milling MT3
1 x	TU 2404
1 x	4-jaw chuck individually clamping 80mm
1 x	Dial gauge
1 x	4-jaw chuck individually clamping 100mm
1 x	Cutter head for copy and surface milling MT2
1 x	Cutting tool 10 mm
1 x	centrically clamping 125mm
1 x	3-jaw chuck centrically clamping 160mm
1 x	DCMT070204
1 x	Cutting tool HM 20 mm
1 x	3-jaw chuck centrically clamping 80mm
1 x	Cutting tool 8 mm
1 x	CM2 - B16 - M10
1 x	End milling cutter kit HSS 12 pcs
1 x	3-jaw chuck centrically clamping 100mm
1 x	Cutting tool 16 mm
1 x	3-jaw chuck centrically clamping 125mm
1 x	4-jaw chuck individually clamping 125mm
1 x	centrically clamping 100mm
1 x	TU 2004V
1 x	Cutting disc, with reinforcement
1 x	Four Jaw Chuck
1 x	Boring Bar for DCMT 10mm
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Broca de alta duração de 2.1mm
1 x	Centre Turning Attachment
1 x	Tool holder for rotary tools
1 x	Hand magnifier with LED light 3X
1 x	Silicon-Carbide.
1 x	Special Fused Alumina (Hardness N).
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Angle cutter 45 °
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Broca de alta duração de 2.7mm
1 x	Broca de alta duração de 2.3mm
1 x	Lathe tools 10mm pastilhados
1 x	Collet Set for accurate use on round components
1 x	Broca de alta duração de 3.0mm
1 x	Rebating cutter 6.4mm
1 x	Boring Bar for CCMT 16mm
1 x	IC Test clip 20 pins
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x	10-piece wood router cutter set
1 x	Independent four jaw chuck for the DB 250
1 x	Broca de alta duração de 2.6mm
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Super-fine sanding discs grain 000
1 x	Core box bit 3.2mm
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Slot cutter 5.0mm
1 x	Combi cutter 6.5/2.5mm
1 x	MICROFLAM gas soldering set MGS
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Half round cutter 13mm
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Rounding over cutter 6.4mm
1 x	Fixed Steady
1 x	Chuck for TBM 220
1 x	Slot cutter 3.2mm
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Broca de alta duração de 2.2mm
1 x	SCLCR1010E06
1 x	sanding belts for BBS/s Grit 150
1 x	Parting tool 10mm
1 x	Slot cutter 6.5mm
1 x	Five piece HSS chisel set
1 x	Three jaw chuck for the lathe DB 250
1 x	Polishing Set
1 x	Edge cutter with pin 6.4mm
1 x	Blade holders for DS 460
1 x	Pinça SOIC de 8 pinos
1 x	sclcr2525M12
1 x	Boring Bar for CCMT
1 x	Broca de alta duração de 2.9mm

€8,999.90