€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

3 x	Coarse-toothed (18 TPI per 25mm)
1 x	Hot wire cutter THERMOCUT 650
2 x	Replacement cutting disc for MICRO cutter MIC
2 x	Diamond-coated cutting disc for MIC
2 x	Core box bit 3.2mm
1 x	Hot wire cutter THERMOCUT 230/E
3 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x	Combi cutter 6.5/2.5mm
2 x	Replacement glue sticks for HKP 220
3 x	Coarse-toothed (10 TPI per 25mm)
2 x	Edge cutter with pin 6.4mm
3 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Hot wire cutter THERMOCUT 12/E
3 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
2 x	Slot cutter 5.0mm
3 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
2 x	Drill chuck with sliding sleeve for the tailstock
1 x	Broca de alta duração de 3.0mm
1 x	Super-fine sanding discs grain 000
1 x	Broca de alta duração de 2.6mm
1 x	Professional set for finish grinding and polishing
1 x	Diamond-coated cutting and roughing disc
1 x	Conj 5 pinças ESD
1 x	Broca de alta duração de 2.9mm
1 x	Broca de alta duração de 2.7mm
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	Grinding mop cylinder grit 120
1 x	PRECISION WIRE STRIPPER ESD-PLUS
1 x	Grinding mop cylinder grit 240
1 x	Grinding mop cylinder grit 80
1 x	Professional polishing sponge
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
2 x	Broca de alta duração de 2.3mm
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	Grinding mop cylinder grit 120
2 x	Broca de alta duração de 2.4mm
1 x	Super-fine sanding discs grain 400
2 x	Broca de alta duração de 2.1mm
2 x	Corundum fan sander for LWS
1 x	Broca de alta duração de 2.8mm
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
2 x	Broca de alta duração de 2.2mm
1 x	Tungstein carbide rasp - and cutting disc
3 x	Spare cutting wire
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x	Blade holders for DS 460
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Rebating cutter 6.4mm
1 x	Slot cutter 6.5mm
2 x	Fine dust paper filter for CW-matic
1 x	Half round cutter 13mm
1 x	Angle cutter 45 °
1 x	10-piece wood router cutter set
2 x	Fluted filter for CW-matic
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Rounding over cutter 6.4mm
1 x	V-slot cutter 6.5mm
1 x	Slot cutter 3.2mm
1 x	DIL40/PLCC68 ZIF DS87C550
1 x	Table Sawr TKS 315 E
1 x	DIL28/PLCC32 ZIF EPROM
1 x	BeeHive204
1 x	DIL24W/SOIC24 ZIF 300mil
1 x	Three jaw chuck for the lathe DB 250
1 x	DIL14W/SOIC14 ZIF 150mil
1 x	DIL18W/SOIC18 ZIF 300mil
1 x	DIL20W/PLCC20 ZIF
1 x	broca de alta duração de 0,6mm
1 x	DIL16/SOIC16-1 ZIF 170mil
1 x	broca de alta duração de 0,2mm
1 x	DIL40/PLCC28 ZIF AWM-1
1 x	Broca de alta duração de 0.4mm
1 x	Broca de alta duração de 0.3mm
1 x	DIL40/MLF64 ZIF-CS AVR-1
1 x	DIL40/PLCC52 ZIF MCS51-2
1 x	DIL32/PLCC32 ZIF-CS
1 x	DIL28/PLCC84 ZIF HS538ESC01H
1 x	Wood Lathe DB900
1 x	Independent four jaw chuck for the DB 250
1 x	DIL44/MLF44-1 ZIF-CS
1 x	BIT-SET
1 x	Five piece HSS chisel set
1 x	Wood Lathe DB450
1 x	HSS immersion saw blades for OZI
2 x	sanding belts for BBS/s Grit 240
1 x	DIL20/PLCC20 ZIF-CS
1 x	DIL28/SOIC28 ZIF 330 mil
1 x	Lathe tools 8mm pastilhados
1 x	Broca de alta duração de 0.9mm
1 x	Lathe tools 10mm pastilhados
1 x	Broca de alta duração de 1.3mm
1 x	Belt sander BBS/S
1 x	DIL40/SOIC20 ZIF AWM-1
1 x	DIL28/PLCC28 ZIF-CS
1 x	Cutting tool 10 mm
1 x	DIL40/PLCC44 ZIF W-EPROM / MCS51
1 x	Cutting tool 8 mm
1 x	Sanding pads for OZI 220/E grit 150
1 x	DIL32/SOIC32 ZIF 445mil
1 x	DIL40/PLCC52 ZIF DS87C530
1 x	DIL28W/SOIC28 ZIF 300mil
1 x	Sanding pads for OZI 220/E grit 80
1 x	Broca de alta duração de 1.5mm
1 x	lathe tools 8mm
1 x	Sanding pads for OZI 220/E grit 240
1 x	lathe tools 12mm
1 x	DIL32/PLCC84 ZIF HS3334ESCF1H
1 x	Broca de alta duração de 0.5mm
1 x	HSS cutting blade for OZI
1 x	Broca de alta duração de 2.5mm
1 x	Insulation Resistance Tester MG500
1 x	DIL20W/SOIC20 ZIF 300mil
1 x	Table Saw TKS 2500 SC
1 x	DIL24/QSOP24 ZIF 150mil
1 x	Broca de alta duração de 1.1mm
1 x	DIL40/PLCC44 ZIF PIC-1
1 x	Broca de alta duração de 2.0mm
1 x	DIL28/PLCC28 ZIF
1 x	DIL16/SOIC16 ZIF 200 mil
1 x	Broca de alta duração de 0.7mm
1 x	Cutting tool 16 mm
1 x	DIL40/SOIC28 ZIF AWM-1
2 x	surface planing and thicknessing ADH 200
1 x	Footswitch FS
1 x	DIL16W/SOIC16 ZIF 150mil
1 x	DIL40/SOIC20 ZIF MB95-1
1 x	BeeHive208S
1 x	DIL3/SOT23-3 ZIF-CS
1 x	DIL40/PLCC52 ZIF AWM-2
1 x	Broca de alta duração de 1.2mm
1 x	DIL32/MLF32-1 ZIF
1 x	Cutting tool HM 20 mm
1 x	Broca de alta duração de 1.0mm
1 x	DIL40/PLCC68 ZIF AWM-1
1 x	sanding belts for BBS/s Grit 80
1 x	Broca de alta duração de 0.8mm
1 x	Broca de alta duração de 1.4mm
1 x	DIL40/SOIC16 ZIF MB-1
1 x	DIL16W/SOIC16 ZIF 300mil
1 x	DIL20/SOIC20 ZIF 200mil
1 x	Vacum SAA 901
1 x	DIL20/SOIC20 ZIF 300 mil
1 x	DIL44/SOIC44 ZIF-CS
1 x	lathe tools 10mm
1 x	DIL32/PLCC32 ZIF
1 x	DIL40/PLCC52 ZIF AWM-1
1 x	Diamond cutting blade for OZI
1 x	Insulation Resistance Tester MG125
1 x	DIL32/SOIC32 ZIF 300 mil
2 x	surface planing and thicknessing ADH 250
1 x	SCLCR1010E06
1 x	MICROMOT Mains Adapter NG 5/E
1 x	DIL28/QFN28-2 ZIF-CS
1 x	DCGT 070202F-AL
1 x	Lathe System PD 400
1 x	BGA-0245/0242
1 x	Boring Bar for DCMT 10mm
1 x	Delta sander OZI/E
1 x	Earth wire
1 x	BGA-Bottom-108
1 x	Cross-recess Screwdrivers Pozidriv 2
1 x	DIL48/MQFP80 ZIF C500
1 x	Cross-recess Screwdrivers 1
1 x	Insert CCGT120404-AK
1 x	Precision lathe PD 250/E
1 x	Parting tool 10mm
1 x	BGA-Bottom-106
1 x	BGA-Bottom-1
1 x	MICROMOT Mains Adapter NG 2/S
1 x	sandpaper for PS 13 Grit 240
1 x	End side cutters 45º EUROline-Conductive

€29,480.93