€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	DIL20/SOIC20 ZIF 300 mil
1 x	DIL40/TSOP40 ZIF 18.4mm
1 x	DIL44/SOIC44 ZIF-CS
1 x	DIL16W/SOIC16 ZIF 300mil
1 x	DIL32/TSOP32 ZIF 12.4mm Flash
1 x	DIL32/TSOP32 ZIF 11.8mm
1 x	DIL20/SOIC20 ZIF 200mil
1 x	DIL40/TSOP40 ZIF-CS 12.4mm
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-6
1 x	DIL28/TSOP28 ZIF 11.8 mm
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
1 x	DIL8/QFN8-1 ZIF-CS
1 x	DIL16/SOIC16-1 ZIF 170mil
1 x	DIL48/TSOP48 ZIF 15.4mm
1 x	DIL40/SOIC20 ZIF MB95-1
1 x	DIL14W/SOIC14 ZIF 150mil
1 x	DIL32/SDIP64 ZIF H8-1
1 x	DIL48/TSOP48 ZIF 18.4mm
1 x	DIL28W/SOIC28 ZIF 300mil
1 x	DIL3/SOT23-3 ZIF-CS
1 x	DIL40/SOIC20 ZIF AWM-1
1 x	DIL40/SDIP52 ZIF 55x
1 x	DIL18W/SOIC18 ZIF 300mil
1 x	DIL32/SOIC32 ZIF 300 mil
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-3
1 x	DIL32/SOIC32 ZIF 445mil
1 x	DIL48/SDIP56 ZIF 68HC05Bx
1 x	DIL40/SOIC16 ZIF MB-1
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x	DIL32/SDIP32 ZIF 400mil
1 x	DIL16W/SOIC16 ZIF 150mil
1 x	DIL28/TSOP28 ZIF 11,8mm Flash
1 x	DIL42/SDIP42 ZIF 600mil
1 x	DIL32/SDIP64-1 ZIF Toshiba-BM1136
1 x	DIL16/SOIC16 ZIF 200 mil
1 x	DIL24W/SOIC24 ZIF 300mil
1 x	DIL40/SOIC28 ZIF AWM-1
1 x	DIL48/PLCC52 ZIF-CS 68HC11
1 x	DIL20W/SOIC20 ZIF 300mil
1 x	DIL40/VQFP64 ZIF AWM-1
1 x	DIL28/SOIC28 ZIF 330 mil
1 x	DIL44/TQFP44-1 Zif
2 x	BGA-Bottom-105
2 x	BGA-Bottom-108
1 x	EPROM/Flash-PLCC32-2-DIL32 socket submodule
1 x	Bottom PSOP44 NOR-1
1 x	DIL48/SSOP56 ZIF Flash-1
1 x	DIL48/QFP100 ZIF PLD-1
1 x	Set of special steel cutters
1 x	DIL40/TQFP80-1 ZIF AWM-1
1 x	SmartProg2
1 x	Wheels brushes
1 x	BGA-Bottom-115
1 x	DIL48/MQFP80 ZIF C164
2 x	BGA-0245/0241
1 x	BGA-Bottom-111
1 x	Tungsten carbide drills Ø1mm
1 x	Steel cups
1 x	DIL44/MLF44-1 ZIF-CS
1 x	DIL48/SSOP56 ZIF Flash-3
1 x	DIL48/PQFP80 ZIF M58BW-1
1 x	Wolfram vanadium steel milling bits
1 x	HSS drill bits 1.2mm
2 x	BIT-SET
2 x	BGA-0245/0243
1 x	Flexible silicon discs
1 x	Set of precision cutters
1 x	DIL40/TQFP64 ZIF CC-1
1 x	HSS drill bits 0.8mm
1 x	Slot cutter 6.5mm
2 x	BeeHive204
1 x	Felt polishers
1 x	HSS drill bits 1.0mm
1 x	Top PSOP44 ZIF 600mil
1 x	DIL40/TQFP64 ZIF AVRmega-2
1 x	Cups brushes
1 x	Cotton polishers
1 x	Tungsten carbide cutter 1.0mm
1 x	Milling cutter set (6 - 10mm)
2 x	BGA-Bottom-106
1 x	Slot cutter 3.2mm
1 x	Brass brushes
1 x	BGA-Bottom-1
1 x	DIL34/SSOP34 ZIF 200 mil
1 x	DIL40/TQFP52 ZIF EM652X
2 x	BGA-0246/0244
1 x	DIL40/TQFP80-1 ZIF PIC-1A
1 x	DIL48/SSOP56 ZIF Flash-2
1 x	Core box bit 3.2mm
1 x	DIL40/QFP80 ZIF M37702
1 x	Milling cutter set (2 - 5mm)
2 x	BGA-0246/0243
1 x	DIL34/SSOP34-1 ZIF-CS
1 x	DIL8/SSOP8 ZIF 120mil
1 x	DIL48/MQFP80 ZIF C500
1 x	Flexible silicon discs
2 x	BGA-Bottom-103
1 x	DIL48/TQFP48-1 ZIF
1 x	DIL32/QFP64 ZIF H8-1
1 x	Steel brushes
1 x	DIL48/QFP100 ZIF MB90F-1
1 x	Stainless steel brushes
1 x	Half round cutter 13mm
1 x	DIL40/TQFP64 ZIF EM652X
1 x	HSS drill bits 0.5mm
1 x	DIL40/QFP64-2 ZIF-CS NEC-1
1 x	DIL48/QFP100 ZIF NEC-1
1 x	Flexible silicon discs
2 x	BGA-Bottom-118
1 x	DIL24/TSSOP24 ZIF 170mil
1 x	10-piece wood router cutter set
1 x	Tungsten carbide drills Ø1,5mm
1 x	DIL48/TQFP100 ZIF PLD-2
2 x	BeeHive208S
1 x	DIL48/TQFP64 ZIF HC908-1
1 x	Stainless steel cups
1 x	DIL48/LQFP64 ZIF M38039/M39049
1 x	DIL48/LQFP64 ZIF M16C/Tiny
1 x	DIL40/TQFP44 ZIF PIC-1
1 x	Solid carbide stylus for engraving
1 x	DIL44/SSOP44 ZIF 240mil
1 x	Stainless steel wheels
1 x	BGA-Bottom-101
1 x	DIL32/MLF32-1 ZIF
1 x	BGA-0245/0242
1 x	Polishing paste
1 x	DIL28/QFP64 ZIF H8/3644
1 x	DIL40/MQFP52 ZIF ADuC812
1 x	BGA-Bottom-125
1 x	Conjunto de três brocas de ponto
1 x	DIL40/QFP100 ZIF AVR-1
1 x	Combi cutter 6.5/2.5mm
1 x	Tungsten carbide drills Ø2mm
1 x	DIL40/TQFP44 ZIF EM652X
1 x	BGA-Bottom-126
1 x	DIL48/TQFP144 ZIF ST10-1
1 x	DIL40/QFP64 ZIF LPC-1
2 x	BGA-Bottom-11
1 x	Disc cutters
1 x	Solid carbide stylus for engraving
1 x	Slot cutter 5.0mm
1 x	DIL44/TQFP44-3 ZIF
1 x	BGA-Bottom-127
1 x	Steel wheels
1 x	DIL40/TQFP44 ZIF AWM-1
1 x	HSS drill bits 1.6mm
1 x	DIL40/QFP64-1 ZIF-CS NEC-1
1 x	DIL48/PQFP100 ZIF PLD-1
1 x	BeeProg2
1 x	DIL48/PQFP100 ZIF ST92Fxxx
1 x	DIL48/TQFP100 ZIF ST92Fxxx
2 x	BGA-Bottom-102
1 x	DIL48/PQFP100 ZIF ST10-1
1 x	Bottom PSOP44 NOR-3
1 x	DIL48/SSOP48 ZIF 300mil
1 x	Felt polishers
1 x	Flame shaped milling cutters
1 x	Beeprog2C
1 x	DIL48/PQFP144 ZIF ST10-1
1 x	DIL40/TQFP44-1 ZIF MCS51
1 x	BGA-Bottom-10
1 x	Felt polishers
1 x	Flexible polishing pad set
1 x	Flexible polishing pad set
1 x	Cylinder shaped milling cutters
1 x	HSS twist drill set with centring pin
1 x	DIL48/QFP100 ZIF NEC-2
1 x	Bottom PSOP44 NOR-2
1 x	Felt polishers
1 x	V-slot cutter 6.5mm

€46,765.04