€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Tungsten Carbide Tipped (TCT)
1 x	Felt cloth polishing disc (100 x 15mm)
1 x
1 x	Super-Cut
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Diamond Coated
1 x	Supercut jig saw blades of special steel
1 x	Universal polishing paste
1 x	DIL48/PQFP144 ZIF ST10-1
1 x	Diamond Cutting Discs
1 x	DIL48/MQFP80 ZIF C164
1 x	Diamond Grinding Bits 1,8mm
1 x	Ball-shaped diamond coated 3.2mm
1 x	DIL48/PQFP80 ZIF M58BW-1
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-2
1 x	Tungsten carbide drills Ø1mm
2 x	Tungstein carbide rasp - and cutting disc
1 x	DIL44/TSOP44-II ZIF 400mil
1 x	Diamond Twist Drills
1 x	Sanding fleece for LWS
1 x	DIL48/PQFP100 ZIF ST92Fxxx
1 x	DIL28/TSOP28 ZIF 11.8 mm
1 x	Diamond Grinding Bits 1,8mm
1 x	DIL48/TSOP48 ZIF 18.4mm
1 x	HSS drill bits 1.0mm
1 x	Sanding fleece for LWS
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-3
1 x	DIL40/TSOP40 ZIF-CS 12.4mm
1 x	Diamond Cutting Discs
1 x	Conjunto de três brocas de ponto
1 x	DIL28/TSOP28 ZIF 11,8mm Flash
1 x	DIL32/TSOP32 ZIF 11.8mm
1 x	HSS drill bits 1.2mm
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
2 x	Corundum bound cutting disc for LWS
1 x	DIL40/MQFP52 ZIF ADuC812
2 x	FREEZER-BR 200ml
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
2 x	Backing disc for LWS
2 x	Corundum fan sander for LWS
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-1
1 x	Diamond Grinding Bits 5mm
1 x	EPROM/Flash-PLCC32-2-DIL32 socket submodule
1 x	DIL40/TSOP40 ZIF 18.4mm Flash-1
1 x	HSS drill bits 0.8mm
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
1 x	Corundum grinding disc for LWS
2 x	Corundum fan sander for LWS
1 x	HSS twist drill set with centring pin
1 x	DIL48/PQFP100 ZIF ST10-1
1 x	HSS drill bits 1.6mm
1 x	Diamond Cutting Discs
2 x	Corundum grinding disc for LWS
1 x	DIL48/MQFP80 ZIF C500
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	DIL48/PQFP100 ZIF PLD-1
1 x	DIL44/TQFP44-3 ZIF
1 x	Special Fused Alumina (Hardness N).
1 x	Polishing paste
1 x	Flexible silicon discs
1 x	DIL40/TQFP80-1 ZIF AWM-1
1 x	Cross-recess Screwdrivers 000
2 x	Ceramic tweezers 5-082
1 x	Footswitch FS
1 x	High quality corundum grinding bits
1 x	Diamond-coated cutting and roughing disc
1 x	Screwdriver 1.5
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Screwdriver 1.5
1 x	Screwdriver 2.0
1 x	BIT-SET
1 x	BGA-Bottom-102
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	DIL48/TQFP100-2 ZIF PLD-1
1 x	DIL34/SSOP34-1 ZIF-CS
1 x	High quality corundum grinding bits
1 x	Felt polishers
1 x	BGA-Bottom-10
1 x	Round nose pliers 165mm
1 x	Broca de alta duração de 2.3mm
1 x	BGA-0245/0243
1 x	Three jaw chuck for the lathe DB 250
1 x	Independent four jaw chuck for the DB 250
1 x	BeeProg2
1 x	6-piece TORX-screwdriver-set ESD
1 x	DIL40/TQFP64 ZIF PIC-1A
1 x	Combination pliers 190mm
1 x	Felt polishers
1 x	Round nose pliers 160mm
1 x	DIL40/TQFP44 ZIF EM652X
1 x	DIL44/TQFP44-2 ZIF
1 x	DIL48/SSOP48 ZIF 300mil
1 x	sanding belts for BBS/s Grit 80
2 x	Ceramic-tipped tweezers and ESD 5-095
1 x	Cross-recess Screwdrivers 2
3 x	Antiallergical Tweezers 5-125-1
1 x	6-piece set of ESD/EGB tweezers
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Combination pliers 205mm
1 x	sandpaper for PS 13 Grot 180
1 x	ACCENT SERVICE TOOLS SET
1 x	DIL40/TQFP64 ZIF EM652X
1 x	Milling cutter set (2 - 5mm)
1 x	6-piece socket wrenches ESD
1 x	Screwdriver 2.5
1 x	Cotton polishers
1 x	DIL48/TQFP64 ZIF HC908-1
1 x	Cross-recess Screwdrivers 1
1 x	Spare cutting wire
1 x	DIL48/TQFP144 ZIF ST10-1
1 x	DIL48/SSOP56 ZIF Flash-2
1 x	DIL44/TQFP44-1 Zif
1 x	DIL40/TQFP44 ZIF PIC-1
1 x	Combination pliers 185mm
1 x	High quality corundum grinding bits
1 x	DIL48/SSOP56 ZIF Flash-3
1 x	sanding belts for BBS/s Grit 150
1 x	DIL40/TQFP64 ZIF CC-1
1 x	Combination pliers 185mm
1 x	sandpaper for PS 13 Grit 240
1 x	Round nose pliers 185mm
1 x	Brass contact cleaner brush
2 x	Professional set for finish grinding and polishing
1 x	BGA-Bottom-11
1 x	Flexible polishing pad set
2 x	Ceramic tweezers 5-081
2 x	Antiallergical Tweezers 5-107-1
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	BGA-Bottom-101
1 x	Screwdriver 0.8
1 x	DIL48/TQFP48-1 ZIF
1 x	DIL48/TQFP100 ZIF PLD-2
1 x	Cotton polishers
1 x	DIL48/SSOP56 ZIF Flash-1
1 x	6-piece wrench key set ESD
1 x	Flexible silicon discs
1 x	ESD-handling set
1 x	Screwdriver 1.2
2 x	Antiallergical Tweezers 5-121-1
1 x	BGA-Bottom-103
1 x	SmartProg2
1 x	Cross-recess Screwdrivers 2
1 x	Cross-recess Screwdrivers 1
1 x	DIL40/TQFP44-1 ZIF MCS51
1 x	6-piece screwdriver and cross-recess set
1 x	Flexible silicon discs
1 x	Cross-recess Screwdrivers 0
2 x	Beeprog2C
1 x	Screwdriver 2.0
1 x	DIL8/SSOP8 ZIF 120mil
1 x	Ceramic-tipped tweezers and ESD 5-096
1 x	High quality corundum grinding bits
1 x	ESD-handling ser 9-361
1 x	BGA-Bottom-106
1 x	sandpaper for PS 13 Grit 400
1 x	BeeHive208S
1 x	Polishing Set
1 x	DIL48/SSOP70 ZIF OKI-1
1 x	Cross-recess Screwdrivers 0
1 x	DIL34/SSOP34 ZIF 200 mil
1 x	BGA-Bottom-115
1 x	Screwdriver 1.8
1 x	High quality corundum grinding bits
1 x	Milling cutter set (6 - 10mm)
1 x	High quality corundum grinding bits
1 x	BGA-Bottom-1
1 x	High quality corundum grinding bits
1 x	Component tweezers 5-009
1 x	Combination pliers 170mm
1 x	6pcs Double Open End wrench set
1 x	FLUX DISPENSING PEN, LEAD FREE
1 x	Antiallergical Tweezers 5-117-1
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	BeeHive204
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Cross-recess Screwdrivers 1
1 x	Cross-recess Screwdrivers 00

€25,965.75