€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Delta sander OZI/E
1 x	Polishing Set
1 x	Special Fused Alumina (Hardness N).
1 x	IC Test clip 20 pins
1 x	Jig saw blades made of HSS
1 x	Grinding mop cylinder grit 120
1 x	Cylinder sander WAS/E
1 x	Silicon-Carbide.
1 x	Corundum grinding disc for LWS
2 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
2 x	Corundum grinding disc for LWS
1 x	Self-adhesive white corundum sanding discs for TG 125/E
2 x	Sanding fleece for LWS
2 x	Corundum fan sander for LWS
2 x	Corundum bound cutting disc for LWS
1 x	Corundum sanding discs for LWS
2 x	Microfibre cloth
1 x	Self-adhesive white corundum sanding discs for TG 250/E
2 x	Professional set for finish grinding and polishing
1 x	Diamond-coated cutting and roughing disc
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Milling cutter set (6 - 10mm)
2 x	Corundum sanding discs for LWS
1 x	Self-adhesive silicone film for easy sanding disc replacement
2 x	Sanding fleece for LWS
2 x	Tungstein carbide rasp - and cutting disc
1 x	Lambswool polishing disc
2 x	Corundum fan sander for LWS
2 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Self-adhesive white corundum sanding discs for TG 250/E
2 x	Self-adhesive white corundum sanding discs for TG 125/E
2 x	Backing disc for LWS
1 x	BGA-Bottom-111
1 x	DIL20/PLCC20 ZIF-CS
1 x	DIL20W/SOIC20 ZIF 300mil
1 x	DIL32/SOIC32 ZIF 445mil
1 x	DIL16/SOIC16-1 ZIF 170mil
1 x	Diamond Cutting Discs
1 x	DIL40/TSOP40 ZIF 18.4mm Flash-1
1 x	Flexible silicon discs
1 x	DIL44/TQFP44-2 ZIF
1 x	DIL40/TQFP80-1 ZIF AWM-1
1 x	DIL40/MLF64 ZIF-CS AVR-1
2 x	BeeProg2
1 x	DIL20/SOIC20 ZIF 300 mil
1 x	DIL40/TQFP44-1 ZIF MCS51
2 x	BeeHive208S
1 x	DIL3/SOT23-3 ZIF-CS
1 x	DIL40/PLCC52 ZIF DS87C530
1 x	BGA-Bottom-115
1 x	BGA-Bottom-10
1 x	DIL40/PLCC68 ZIF AWM-1
1 x	Diamond Grinding Bits 1,8mm
1 x	Diamond Grinding Bits 1,8mm
1 x	Beeprog2C
1 x	DIL48/PQFP100 ZIF ST92Fxxx
1 x	DIL28/TSOP28 ZIF 11,8mm Flash
1 x	Cotton polishers
1 x	DIL8/SOT23-6 ZIF-CS PIC
1 x	BGA-0245/0241
1 x	DIL40/SOIC16 ZIF MB-1
1 x	BGA-Bottom-106
1 x	DIL40/PLCC68 ZIF DS87C550
1 x	DIL48/MQFP80 ZIF C164
1 x	DIL40/TQFP64 ZIF CC-1
1 x	DIL44/TQFP44-3 ZIF
1 x	Flexible silicon discs
1 x	Diamond Grinding Bits 5mm
1 x	DIL44/SSOP44 ZIF 240mil
1 x	DIL44/MLF44-1 ZIF-CS
1 x	BGA-Bottom-101
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-1
1 x	Diamond Grinding Bits 1mm
1 x	DIL48/SSOP90 ZIF Flash-1
1 x	BGA-Bottom-1
1 x	DIL32/PLCC32 ZIF
1 x	DIL20W/PLCC20 ZIF
1 x	Diamond Cutting Discs
1 x	DIL48/PQFP80 ZIF M58BW-1
1 x	DIL48/TSOP48 ZIF 15.4mm
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-2
1 x	DIL40/SOIC20 ZIF AWM-1
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-3
1 x	BGA-Bottom-103
1 x	DIL40/PLCC44 ZIF AWM-1
1 x	MICROMOT steel collet set
1 x	DIL18W/SOIC18 ZIF 300mil
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-5
1 x	DIL32/TSOP32 ZIF 11.8mm
1 x	BGA-Bottom-108
1 x	BGA-0246/0244
1 x	Cotton polishers
1 x	DIL48/TQFP100 ZIF ST92Fxxx
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
1 x	DIL40/SOIC20 ZIF MB95-1
1 x	PLCC Extractor
1 x	Tungsten Carbide Tipped (TCT)
1 x	DIL48/PQFP100 ZIF ST10-1
1 x	MICROMOT glue gun HKP 220
1 x	Ball-shaped diamond coated 1.2mm
1 x	DIL28/PLCC28 ZIF
1 x	DIL40/PLCC52 ZIF AWM-2
1 x	DIL40/TQFP44 ZIF EM652X
1 x	DIL40/PLCC44 ZIF PIC-1
1 x	BeeHive204
1 x	DIL48/MQFP80 ZIF C500
1 x	Diamond Cutting Discs
1 x	DIL40/TQFP64 ZIF AVRmega-2
1 x	SmartProg2
1 x	DIL8/SSOP8 ZIF 120mil
1 x	DIL40/TQFP44 ZIF AWM-1
1 x	BGA-Bottom-11
1 x	DIL28/PLCC28 ZIF-CS
1 x	DIL40/TSOP40 ZIF 18.4mm
1 x	DIL40/PLCC44 ZIF W-EPROM / MCS51
1 x	DIL32/SOIC32 ZIF 300 mil
1 x	DIL28/SOIC28 ZIF 330 mil
1 x	DIL32/MLF32-1 ZIF
1 x	Super-fine sanding discs grain 400
1 x	Flexible polishing pad set
1 x	DIL40/TQFP64 ZIF PIC-1A
1 x	DIL48/SSOP48 ZIF 300mil
1 x	DIL48/TQFP64 ZIF HC908-1
1 x	DIL28W/SOIC28 ZIF 300mil
1 x	DIL40/PLCC28 ZIF AWM-1
1 x	DIL48/SSOP56 ZIF Flash-3
1 x	BGA-Bottom-102
1 x	DIL40/TQFP80-1 ZIF PIC-1A
1 x	Diamond Cutting Discs
1 x	EPROM/Flash-PLCC32-2-DIL32 socket submodule
1 x	DIL28/PLCC84 ZIF HS538ESC01H
1 x	DIL40/SOIC28 ZIF AWM-1
1 x	Polishing felt, medium hard
1 x	Ball-shaped diamond coated 3.2mm

€33,947.08