€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Footswitch FS
1 x	Flexishaft MICROMOT 110/P
1 x	MICROMOT steel collet set
1 x	Mill/Drill Unit BFB 2000.
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Cross-recess Screwdrivers 000
1 x	Screwdriver 2.0
1 x	Cross-recess Screwdrivers 1
1 x	Screwdriver 1.2
2 x	Combination pliers 170mm
1 x	Antiallergical Tweezers 5-107-1
1 x	Brass contact cleaner brush
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Telephon pliers bent 200mm
1 x	Cross-recess Screwdrivers 00
1 x	BIT-SET
1 x	Screwdriver 1.0
1 x	Screwdriver 5.5
1 x	Crimping plier for BNC
1 x	Telephone pliers straight 205mm
1 x	Flat nose pliers 160mm
1 x	EUROline side cutter pointed head
1 x	EUROline mini side cutter
1 x	Safety insulated screwdrivers 14-604 VDE
1 x	Safety Insulated Phillips Screwdriver 14-631VDE
2 x	Combination pliers 210mm
1 x	EUROline end cutter
1 x	Safety Insulated Phillips Screwdriver 14-632VDE
1 x	Cross-recess Screwdrivers 00
1 x	Safety insulated screwdrivers 14-606 VDE
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	Cross-recess Screwdrivers 1
1 x	Cross-recess Screwdrivers 000
1 x	EUROline flat nose pliers
1 x	Telephon pliers straight 200mm
1 x	Antiallergical Tweezers 5-121-1
1 x	Safety insulated screwdrivers 14-603 VDE
1 x	6-piece screwdriver and cross-recess set
1 x	Screwdriver 2.5
1 x	6pcs Double Open End wrench set
1 x	Round nose pliers 165mm
1 x	EUROline side cutter rounded head
1 x	Screwdriver 3.0
1 x	6-piece screwdriver and cross-recess set ESD
1 x	Cone shaped milling cutter
1 x	Crosscut 'Super-Cut' blade
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Ball shaped milling cutters
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Blade guides separately
1 x	Saw blade made of high-alloy special steel
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Tungsten tipped saw blade
1 x	Blade for Wood and Plastics
1 x	Ball-shaped diamond coated 1.2mm
1 x	Tool holder type H for SWH 1-A
1 x	Follow rest for D250X550
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
2 x	Quick-action tool holder kit SWH AA
1 x	Flame shaped milling cutters
1 x	Diamond blade
1 x	Tungsten carbide cutter 2.0mm
1 x	Blade for Steel and brass
1 x	Magnetic base
1 x	Supercut jig saw blades of special steel
1 x	HSS immersion saw blades for OZI
1 x	Ball-shaped diamond coated 3.2mm
1 x	Solid carbide saw blade
1 x	HSS immersion saw blades for OZI
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Steady rest for D250X550
1 x	Set of precision cutters
1 x	3-jaw chuck centrically clamping 125mm
1 x	Diamond Cutting Discs
1 x	Flexible silicon discs
1 x	Sanding fleece for LWS
1 x	centrically clamping 125mm
1 x	CM2 - B16 - M10
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	Corundum bound cutting disc for LWS
1 x	Precision quick-action drill chuck 0-13mm B16
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Polishing felt, medium hard
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	Super-fine sanding discs grain 400
1 x	Morse taper MT2 - B16
1 x	3-jaw chuck centrically clamping 100mm
1 x	Sanding fleece for LWS
1 x	Dial gauge
1 x	Flexible silicon discs
1 x	HSS cutting blade for OZI
1 x	Super-fine sanding discs grain 2000
1 x	3-jaw chuck centrically clamping 160mm
2 x	Flat nose pliers 165mm
1 x	Tungsten Carbide Tipped (TCT)
1 x	Flexible silicon discs
1 x	Super-Cut
1 x	4-jaw chuck individually clamping 80mm
1 x	EUROline-Conductive set of pliers
1 x	Precision quick-action drill chuck 0-8mm B16
1 x	Cutting disc, with reinforcement
1 x	4-jaw chuck individually clamping 100mm
1 x	Morse taper MT3 - B16
1 x	Broca de alta duração de 2.9mm
1 x	Broca de alta duração de 3.0mm
1 x	Broca de alta duração de 2.6mm
1 x	ESD Brushe
1 x	Broca de alta duração de 2.8mm
1 x	Warding files set, 6pcs
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Digital caliper gauge 300 mm
1 x	precision machine vices FMS125
1 x	precision machine vices FMS100
2 x	TIP SPT-6
1 x	Telephone pliers bent 165mm
1 x	Telephone pliers stright 205mm
1 x	Combination pliers 185mm
1 x	Wire strippers 165mm
1 x	Wire strippers 160mm
1 x	Telephone pliers bent 205mm
1 x	Cutter head for copy and surface milling MT3
1 x	TIP SPT-2
1 x	TIP SPT-10
1 x	Hot wire cutter THERMOCUT 230/E
1 x	Handy 1515
1 x	IT 200 - Indirect dividing attachment
1 x	IT 150 - Indirect dividing attachment
1 x	RT100 - Horizontal-vertical circular dividing table
1 x	RT150 - Horizontal-vertical circular dividing table
1 x	DIL28/QFP52 ZIF-CS SX52
1 x	DIL48/PQFP100 ZIF ST92Fxxx
1 x	DIL40/QFP80 ZIF M37702
1 x	DIL40/QFP64-1 ZIF-CS NEC-1
1 x	DIL48/QFP100 ZIF PLD-4
1 x	DIL48/MQFP80 ZIF C500
1 x	DIL28/QFP64 ZIF H8/3644
1 x	DIL48/PQFP80 ZIF M58BW-1
1 x	DIL40/QFP64-3 ZIF NEC-1
1 x	DIL48/MQFP80 ZIF C164
1 x	DIL48/QFP100 ZIF MSP430-1
1 x	DIL48/PQFP100 ZIF PLD-1
1 x	DIL40/QFP64 ZIF LPC-1
1 x	DIL40/QFP144 ZIF LPC-1
1 x	DIL40/MQFP52 ZIF ADuC812
1 x	DIL48/QFP100 ZIF PLD-3
1 x	DIL48/SSOP48 ZIF 300mil
1 x	BGA-Bottom-88
1 x	DIL48/SSOP56 ZIF Flash-3
1 x	BGA-Bottom-103
1 x	BGA-Bottom-105

€10,784.86