€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Manufacturers

Information

1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
2 x	sandpaper for PS 13 Grit 400
1 x	Mini side cutters EUROline-Conductive
1 x	EUROline mini side cutter
1 x	Silicon-Carbide.
1 x	Polishing felt, medium hard
1 x	BeeHive208S
1 x	Lambswool polishing disc
1 x	Super-fine sanding discs grain 400
1 x	Super-fine sanding discs grain 2000
1 x	Mini side cutters EUROline-Conductive
1 x	Side cutters 160mm
1 x	Side cutters 160mm
1 x	Backing disc for LWS
1 x	EUROline mini side cutter
1 x	Side cutters 180mm
1 x	Special Fused Alumina (Hardness N).
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Side cutters EUROline-Conductive
1 x	EUROline mini side cutter
1 x	EUROline mini side cutter
1 x	Replacement carving blades for MSG
1 x	EUROline side cutter pointed head
1 x	sandpaper for PS 13 Grit 240
1 x	Polishing Set
1 x	Multiform grindstone
1 x	Side cutters 170mm
1 x	Microfibre cloth
1 x	Grinding mop cylinder grit 240
1 x	BGA-Bottom-118
1 x	FLUX-OFF 400ml
1 x	Grinding mop cylinder grit 80
1 x	FREEZER-BR 200ml
1 x	TUNER 200ml
1 x	VASELINE 200ml
1 x	BeeHive204
1 x	POLISHER 200ml
1 x	Tungsten Carbide Tipped (TCT)
1 x	PRINTER 200ml
1 x	Steel brushes
1 x	TOP-PIN 200ml
1 x	DEGRESER 200ml
1 x	BGA-Bottom-115
1 x	Corundum fan sander for LWS
1 x	BGA-Bottom-108
1 x	BGA-Bottom-10
1 x	PROLUB 200ml
1 x	BGA-Bottom-1
1 x	Steel wheels
1 x	BGA-Bottom-101
1 x	Milling cutter set (6 - 10mm)
1 x	BGA-Bottom-102
1 x	Milling cutter set (2 - 5mm)
1 x	Cups brushes

€11,382.81