€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

3 x	Cutting tools of high quality cobalt HSS steel, ground
2 x	Lathe System PD 400
2 x	Cutting tools of high quality cobalt HSS steel, ground
2 x	Precision lathe PD 250/E
2 x	Three piece thread cutting set
1 x	Disc Sander TG 125/E
1 x	HSS cutting blade for OZI
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Belt sander BBS/S
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Multipurpose Vices Primus 75
1 x	Engraving tool GG
1 x	Pensander PS 13
1 x	Sanding pads for OZI 220/E grit 240
1 x	Cutting disc, with reinforcement
1 x	Grinding and Polishing Machine SP/E
1 x	Long neck angle grinder LHW
1 x	HSS immersion saw blades for OZI
2 x	Polishing machine PM 100
1 x	Universal holder UHZ
1 x	Complete Engraving Kit with trial glass
1 x	Sanding pads for OZI 220/E grit 150
1 x	MICRO Heat gun MH 550
1 x	MICROMOT Mains Adapter NG 2/S
1 x	MICROMOT glue gun HKP 220
1 x	MICROFLAME burner MFB/E
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Belt sander BS/E
2 x	MICROFLAM gas soldering set MGS
1 x	Diamond cutting blade for OZI
1 x	Tungsten Carbide Tipped (TCT)
1 x	MICRO-screwdrivers
1 x	MICROMOT Mains Adapter NG 5/E
1 x	HSS immersion saw blades for OZI
1 x	Router base OFV
1 x	Delta sander OZI/E
1 x	Sanding pads for OZI 220/E grit 80
1 x	HSS boring tool set, 6 pieces
1 x	Angle polisher WP/E
3 x	MICRO cutter MIC
1 x	Ball-shaped diamond coated 2.2mm
3 x	Cut off/mitre saw KGS 80
1 x	Grinding mop cylinder grit 240
1 x	Diamond Grinding Bits 1,8mm
1 x	Replacement cutting disc for MICRO cutter MIC
2 x	Diamond Cutting Discs
2 x	Diamond Cutting Discs
3 x	Table Saw FET
3 x	Jig saw STS 12/E
1 x	Grinding mop cylinder grit 120
1 x	Grinding mop cylinder grit 80
1 x	Ball-shaped diamond coated 1.2mm
2 x	Diamond Cutting Discs
1 x	Fibre-Cut Discs
3 x	MICRO woodturning lathe DB 250
1 x	Diamond Grinding Bits 5mm
2 x	Diamond Cutting Discs
1 x	Metal Cutting Blades
1 x	Fibre-Cut Discs
1 x	Grinding mop cylinder grit 120
1 x	Fibre-Cut Discs
3 x	Surface planer AH 80
1 x	Diamond Grinding Bits 1mm
1 x	Diamond Twist Drills
1 x	Diamond-coated cutting disc for MIC
1 x	Fibre-Cut Discs
1 x	Diamond Grinding Bits 1,8mm
2 x	2-speed scroll saw DSH
1 x	Fibre-Cut Discs
1 x	Super jig saw STS/E
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Ball-shaped diamond coated 3.2mm
1 x	Fibre-Cut Discs
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Fixed Steady
1 x	HSS twist drill set to DIN 338
1 x	sanding belts for BBS/s Grit 80
1 x	Wolfram vanadium steel milling bits
1 x	Tungsten carbide drills Ø2mm
1 x	Silicon-Carbide.
1 x	Spare cutting wire
1 x	Replacement belts for BSL 220/E
1 x	Flame shaped milling cutters
1 x	Collet Set for accurate use on round components
1 x	Polishing Set
1 x	sandpaper for PS 13 Grot 180
1 x	Set of special steel cutters
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Tungsten carbide cutters set
1 x	Solid carbide stylus for engraving
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Footswitch FS
1 x	HSS drill bits 1.0mm
1 x	Tungsten carbide cutter 3.0mm
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Special Fused Alumina (Hardness N).
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Cylindrical cutters
1 x	Cylinder shaped milling cutters
1 x	HSS drill bits 0.5mm
1 x	sandpaper for PS 13 Grit 240
1 x	Solid carbide stylus for engraving
1 x	Replacement belts for BSL 220/E
1 x	Gear Chuck
1 x	Tungsten carbide cutter 1.0mm
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Replacement belts for BSL 220/E
1 x	HSS drill bits 0.8mm
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Conjunto de três brocas de ponto
1 x	sandpaper for PS 13 Grit 400
1 x	Four Jaw Chuck
1 x	Wolfram vanadium steel milling bits
1 x	Cone shaped milling cutter
1 x	Centre Turning Attachment
1 x	Tungsten carbide drills Ø1,5mm
1 x	Tungsten carbide cutter 2.0mm
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	HSS twist drill set with centring pin
1 x	Tungsten carbide drills Ø1mm
1 x	Ball shaped milling cutters
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Tool holder for rotary tools
1 x	HSS drill bits 1.2mm
1 x	sanding belts for BBS/s Grit 240
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	sanding belts for BBS/s Grit 150
1 x	Replacement belts for BSL 220/E
1 x	HSS drill bits 1.6mm
1 x	Hot wire cutter THERMOCUT 650
1 x	Disc cutters
1 x	Set of precision cutters
1 x	Microfibre cloth
2 x	Backing disc for LWS
1 x	BGA-Bottom-103
1 x	Professional polishing sponge
1 x	Corundum sanding discs for LWS
1 x	Universal polishing paste
1 x	Sanding Discs
1 x	Corundum grinding disc for LWS
1 x	BeeHive208S
1 x	Super-fine sanding discs grain 400
1 x	Three jaw chuck for the lathe DB 250
1 x	BGA-Bottom-1
1 x	BGA-0245/0243
1 x	Corundum fan sander for LWS
1 x	BeeHive204
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Professional set for finish grinding and polishing
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Sanding fleece for LWS
1 x	Five piece HSS chisel set
1 x	Milling cutter set (2 - 5mm)
1 x	Sanding Drums
1 x	Lambswool polishing disc
1 x	Sanding bands 14x13mm
1 x	BGA-0246/0243
1 x	BeeProg2
1 x	BGA-Bottom-105
1 x	Tungstein carbide rasp - and cutting disc
1 x	BGA-Bottom-106
1 x	Corundum fan sander for LWS
1 x	BGA-Bottom-111
1 x	Sanding fleece for LWS
1 x	BGA-Bottom-101
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Diamond-coated cutting and roughing disc
1 x	Blade holders for DS 460
1 x	BGA-Bottom-102
1 x	Sanding Discs
1 x	Super-fine sanding discs grain 2000
1 x	Beeprog2C
1 x	Corundum grinding disc for LWS
1 x	Sanding Drums
1 x	Sanding bands 14x13mm
1 x	BGA-Bottom-10
1 x	Corundum sanding discs for LWS
1 x	BGA-0245/0241
1 x	Coarse-toothed (10 TPI per 25mm)
1 x
1 x	Nylon Fleece Brushes
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Independent four jaw chuck for the DB 250

€28,748.79