€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

3 x	Tungsten Carbide Tipped (TCT)
1 x	Sanding bands 14x13mm
2 x	Cutting disc, with reinforcement
1 x	Nylon Fleece Brushes
1 x	Precision steel vice PM 40
1 x	Step clamps made of steel
1 x	Sanding Drums
1 x	Professional set for finish grinding and polishing
1 x	Flap Wheels
1 x	Sanding Drums
1 x	Sanding Drums
1 x	Tungsten carbide cutters set
1 x	Machine Vice MS 4
1 x	Sanding Discs
1 x	Sanding bands 14x13mm
1 x	Sanding Discs
1 x	lathe tools 10mm
1 x	Collet chuck ER32 for D250X550
1 x	6-piece screwdriver and cross-recess set
2 x	Blade for Steel and brass
1 x	6-piece wrench key set ESD
1 x	Morse taper MT2 - B16
1 x	Fine dust paper filter for CW-matic
1 x	Blade for Wood and Plastics
1 x	4-jaw chuck individually clamping 125mm
1 x	Combination pliers 170mm
1 x	TORX-screwdrivers T10
1 x	Fluted filter for CW-matic
1 x	Lathe tools 10mm pastilhados
1 x	Tungstein carbide rasp - and cutting disc
2 x	Telephone pliers straight 205mm
1 x	Cross-recess Screwdrivers 00
1 x	TORX-screwdrivers T9
2 x	Side cutters 195mm
1 x	Diamond blade for MBS 240/E
2 x	Round nose pliers 165mm
1 x	TORX-screwdrivers T6
1 x	Conj 5 pinças ESD
1 x	Cutting tool 10 mm
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Precision quick-action drill chuck 0-13mm B16
1 x	TORX-screwdrivers T15
1 x	Lathe chuck flange for D250X550
1 x	TORX-screwdrivers T10
1 x	6-piece TORX-screwdriver-set
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Tool holder type H for SWH 1-A
1 x	MICROMOT Mains Adapter NG 2/S
1 x	MICROMOT Mains Adapter NG 2/E
1 x	TORX-screwdrivers T5
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Follow rest for D250X550
1 x	6-piece screwdriver and cross-recess set
1 x	3-jaw chuck centrically clamping 125mm
1 x	6-piece screwdriver set ESD
1 x	Telephon pliers bent 200mm
1 x	Tool holder type D for SWH 1-A
1 x	Collet chuck ER25 for D250X550
1 x	Face clamping disc for D250X550
2 x	Side cutters 160mm
2 x	Combination pliers 190mm
1 x	TORX-screwdrivers T7
1 x	TORX-screwdrivers T8
4 x	broca de alta duração de 0,2mm
1 x	TORX-screwdrivers T20
2 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
2 x	Wire strippers 165mm
1 x	machine base with shelves for D250X550
1 x	6-piece screwdriver and cross-recess set
1 x	TORX-screwdrivers T4
1 x	Steady rest for D250X550
2 x	Combination pliers 210mm
1 x	centrically clamping 125mm
1 x	Quick-action tool holder kit SWH AA
2 x	Telephone pliers bent 205mm
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Fibre-Cut Discs
2 x	Broca de alta duração de 2.9mm
2 x	Metal Cutting Blades
2 x	Broca de alta duração de 1.2mm
1 x	Fibre-Cut Discs
2 x	Fibre-Cut Discs
1 x	Broca de alta duração de 3.0mm
1 x	Broca de alta duração de 2.3mm
1 x	Delta sander OZI/E
4 x	Broca de alta duração de 2.7mm
1 x	Broca de alta duração de 0.5mm
1 x	Long neck angle grinder LHW
3 x	Broca de alta duração de 2.8mm
1 x	Broca de alta duração de 2.1mm
2 x	Fibre-Cut Discs
1 x	Disc Sander TG 125/E
2 x	Fibre-Cut Discs
1 x	TU 1503V
2 x	Broca de alta duração de 0.8mm
2 x	Diamond Cutting Discs
2 x	Broca de alta duração de 0.7mm
3 x	broca de alta duração de 0,6mm
2 x	Diamond Cutting Discs
1 x	Belt sander BBS/S
1 x	MICROMOT 50/E
2 x	Fibre-Cut Discs
1 x	Broca de alta duração de 1.1mm
1 x	Grinding and Polishing Machine SP/E
1 x	Telephone pliers stright 165mm
1 x	sanding belts for BBS/s Grit 150
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	TU 2404
3 x	Broca de alta duração de 2.6mm
1 x	Broca de alta duração de 0.3mm
1 x	Mini side cutters EUROline-Conductive
1 x	TU 2004V
1 x	Polishing machine PM 100
2 x	Broca de alta duração de 1.3mm
1 x	Vacum SAA 901
1 x	Angle polisher WP/E
2 x	Broca de alta duração de 1.0mm
1 x	Belt sander BS/E
1 x	Flat nose pliers 165mm
2 x	Diamond Cutting Discs
1 x	Broca de alta duração de 2.0mm
1 x	Broca de alta duração de 0.9mm
1 x	Broca de alta duração de 0.4mm
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Broca de alta duração de 1.4mm
1 x	Morse taper MT3 - B16
1 x	DIL40/TQFP80-1 ZIF AWM-1
1 x	DIL28/QFP64 ZIF H8/3644
1 x	DIL24/QSOP24 ZIF 150mil
1 x	DIL40/QFP64 ZIF LPC-1
1 x	DIL40/QFP144 ZIF H8S-1
1 x	BGA-0245/0242
1 x	DIL40/QFP144 ZIF LPC-1
1 x	BGA-Bottom-11
1 x	DIL48/TQFP100 ZIF PLD-2
1 x	TIP SPT-6
1 x	DIL40/TQFP44 ZIF PIC-1
1 x	DIL40/TQFP52 ZIF EM652X
1 x	TIP SPT-10
1 x	DIL48/LQFP64 ZIF M16C/Tiny
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Precision quick-action drill chuck 0-8mm B16
1 x	BGA-0246/0243
1 x	Broca de ponto 3.15 x 1.25
1 x	DIL40/QFP64-1 ZIF-CS NEC-1
1 x	EPROM/Flash-PLCC32-2-DIL32 socket submodule
1 x	Jig saw blades made of HSS
1 x	BGA-Bottom-103
1 x	BGA-Bottom-111
1 x	TIP SPT-2
1 x	PLCC Extractor
1 x	DIL48/QFP100 ZIF NEC-2

€13,642.27