€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

1 x	V-slot cutter 6.5mm
1 x	Replacement glue sticks for HKP 220
1 x	Corundum grinding disc for LWS
1 x	Slot cutter 3.2mm
1 x	BeeHive204
1 x	Slot cutter 6.5mm
1 x	Polishing felt, medium hard
1 x	10-piece wood router cutter set
1 x	sandpaper for PS 13 Grit 400
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Super-fine sanding discs grain 000
1 x	BGA-0245/0243
1 x	Super-fine sanding discs grain 400
1 x	Tungstein carbide rasp - and cutting disc
1 x	sandpaper for PS 13 Grit 240
1 x	Diamond-coated cutting disc for MIC
1 x	Edge cutter with pin 6.4mm
1 x	BGA-Bottom-105
1 x	Corundum fan sander for LWS
1 x	BGA-0246/0244
1 x	Lambswool polishing disc
1 x	BGA-Bottom-1
1 x	Corundum fan sander for LWS
1 x	BGA-Bottom-10
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Professional polishing sponge
1 x	Footswitch FS
1 x	Corundum sanding discs for LWS
1 x	BGA-Bottom-115
1 x	Super-fine sanding discs grain 2000
1 x	BGA-0246/0243
1 x	Combi cutter 6.5/2.5mm
1 x	Core box bit 3.2mm
1 x	BeeHive208S
1 x	Corundum bound cutting disc for LWS
1 x	Corundum sanding discs for LWS
1 x	Diamond-coated cutting and roughing disc
1 x	Half round cutter 13mm
1 x	Professional set for finish grinding and polishing
1 x	BGA-0245/0242
1 x	Rebating cutter 6.4mm
1 x	Sanding fleece for LWS
1 x	BGA-Bottom-111
1 x	Microfibre cloth
1 x	Corundum grinding disc for LWS
1 x	Rounding over cutter 6.4mm
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	BGA-Bottom-125
1 x	Spare cutting wire
1 x	Hot wire cutter THERMOCUT 650

€13,369.63