€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

1 x	Ball-shaped diamond coated 2.2mm
1 x	Diamond Grinding Bits 1,8mm
1 x	Diamond Grinding Bits 5mm
1 x	Diamond Grinding Bits 1,8mm
3 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Diamond Cutting Discs
3 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
4 x	Slot cutter 6.5mm
4 x	10-piece wood router cutter set
1 x	Diamond Cutting Discs
1 x	Diamond Cutting Discs
1 x	Diamond Cutting Discs
1 x	Ball-shaped diamond coated 1.2mm
1 x	Ball-shaped diamond coated 3.2mm
1 x	Diamond Twist Drills
1 x	Diamond Grinding Bits 1mm
4 x	Angle cutter 45 °
3 x	Blade holders for DS 460
2 x	Backing disc for LWS
3 x	Blade for Steel and brass
1 x	Steel brushes
1 x	Brass brushes
2 x	Corundum grinding disc for LWS
3 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Corundum fan sander for LWS
3 x	Multiform grindstone
1 x	Corundum sanding discs for LWS
1 x	Wheels brushes
1 x	Diamond-coated cutting and roughing disc
1 x	Cups brushes
1 x	Stainless steel brushes
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
3 x	Slot cutter 3.2mm
1 x	Stainless steel cups
3 x	Core box bit 3.2mm
3 x	HSS cutting blade for OZI
1 x	Steel wheels
3 x	Band knife of hardened spring band steel (without teeth)
2 x	MICRO Miller MF 70
1 x	Tungstein carbide rasp - and cutting disc
1 x	Stainless steel wheels
1 x	Steel cups
3 x	Diamond cutting blade for OZI
2 x	Long neck straight drill/grinder LB/E
3 x	Half round cutter 13mm
3 x	Replacement carving blades for MSG
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Felt polishers
1 x	Cotton polishers
1 x	Flexible silicon discs
2 x	Rebating cutter 6.4mm
1 x	Flexible silicon discs
1 x	Felt polishers
3 x	Silicon-Carbide.
1 x	Milling cutter set (2 - 5mm)
1 x	Felt polishers
2 x	Combi cutter 6.5/2.5mm
1 x	Cotton polishers
3 x	Three jaw chuck for the lathe DB 250
1 x	Milling cutter set (6 - 10mm)
2 x	V-slot cutter 6.5mm
1 x	Felt polishers
1 x	Flexible polishing pad set
1 x	Flexible polishing pad set
1 x	Cotton polishers
3 x	MICROMOT Mains Adapter NG 5/E
1 x	Polishing paste
2 x	Bandsaw blade of bimetal for MBS 240/E
2 x	Blade guides separately
3 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Flexible silicon discs
1 x	Sanding Drums
2 x	Sanding pads for OZI 220/E grit 240
2 x	Sanding pads for OZI 220/E grit 80
1 x	High quality corundum grinding bits
1 x	Bench drill machine TBM 220
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Precision Drill/Grinder FBS 240/E
1 x	High quality corundum grinding bits
1 x	Flap Wheels
1 x	Sanding bands 14x13mm
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	Precision drill grinder FBS 12/EF
1 x	Hot wire cutter THERMOCUT 230/E
1 x	Sanding Drums
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	Sanding Discs
1 x	Diamond blade for MBS 240/E
1 x	High quality corundum grinding bits
1 x	MICROMOT 50/E
1 x	Nylon Fleece Brushes
2 x	Sanding pads for OZI 220/E grit 150
1 x	MICROMOT 50
1 x	Long neck angle milling/drilling unit LWB 220/E
1 x	Sanding Discs
1 x	Flap Wheels
1 x	Sanding Drums
1 x	Sanding bands 14x13mm
2 x	HSS immersion saw blades for OZI
2 x	Five piece HSS chisel set
1 x	Sanding Drums
1 x	MICROMOT 50/EF
1 x	Solid carbide stylus for engraving
1 x	Set of precision cutters
1 x	Tungsten carbide cutters set
1 x	Slot cutter 5.0mm
1 x	Rounding over cutter 6.4mm
1 x	HSS twist drill set with centring pin
1 x	HSS drill bits 1.6mm
1 x	Inpection mirror 1-978
1 x	Tungsten carbide drills Ø2mm
1 x	Tungsten carbide drills Ø1,5mm
1 x	Set of special steel cutters
1 x	Wolfram vanadium steel milling bits
1 x	Tungsten carbide cutter 2.0mm
1 x	Independent four jaw chuck for the DB 250
1 x	Ball shaped milling cutters
1 x	Conjunto de três brocas de ponto
1 x	Cone shaped milling cutter
1 x	Solid carbide stylus for engraving
1 x	Tungsten Carbide Tipped (TCT)
1 x	HSS drill bits 1.2mm
1 x	Cylindrical cutters
1 x	Disc cutters
1 x	Flame shaped milling cutters
1 x	Tungsten carbide cutter 1.0mm
1 x	Cylinder shaped milling cutters
1 x	Broca de alta duração de 2.7mm
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Edge cutter with pin 6.4mm
1 x	Tungsten carbide cutter 3.0mm
1 x	HSS twist drill set to DIN 338
1 x	Super-Cut
1 x	Diamond Coated
1 x	HSS drill bits 1.0mm
1 x	Wolfram vanadium steel milling bits
1 x	HSS drill bits 0.5mm
1 x	MICROMOT Mains Adapter NG 2/S
1 x	HSS drill bits 0.8mm
1 x	Tungsten carbide drills Ø1mm
1 x	Replacement belts for BSL 220/E
1 x	BGA-Bottom-111
1 x	Replacement belts for BSL 220/E
2 x	BeeHive204
1 x	Grinding mop cylinder grit 240
1 x	BGA-Bottom-106
1 x	BGA-Bottom-103
1 x	BGA-0246/0243
1 x	sandpaper for PS 13 Grit 240
1 x	BGA-Bottom-118
1 x	BGA-Bottom-11
1 x	BGA-Bottom-1
1 x	BGA-0245/0241
1 x	BGA-Bottom-125
1 x	BGA-Bottom-108
1 x	BGA-Bottom-102
1 x	BGA-0246/0244
1 x	sandpaper for PS 13 Grot 180
1 x	sandpaper for PS 13 Grit 400
1 x	BGA-Bottom-101
1 x	Replacement belts for BSL 220/E
1 x	BGA-0245/0243
1 x	BGA-Bottom-10
1 x	BGA-0245/0242
1 x	Replacement belts for BSL 220/E
1 x	BGA-Bottom-105
1 x	IC Test clip 20 pins
1 x	BGA-Bottom-115
1 x	BeeHive208S

€21,139.25