€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

1 x	TU 1503V
2 x	Professional set for finish grinding and polishing
2 x	Lambswool polishing disc
2 x	Chuck for TBM 220
2 x	Super-fine sanding discs grain 000
2 x	Super-fine sanding discs grain 2000
2 x	Professional polishing sponge
2 x	Super-fine sanding discs grain 400
2 x	Backing disc for LWS
1 x	TU 2004V
1 x	Tungstein carbide rasp - and cutting disc
1 x	Tungsten carbide cutters set
1 x	Micro Compound Table KT 70
1 x	Microfibre cloth
1 x	Polishing felt, medium hard
1 x	Step clamps made of steel
1 x	Precision steel vice PM 40
1 x	Ball-shaped diamond coated 3.2mm
1 x	Diamond Grinding Bits 1,8mm
1 x	Sanding Drums
1 x	HSS drill bits 0.8mm
1 x	Sanding Drums
1 x	Sanding Discs
1 x	Sanding bands 14x13mm
1 x	Tungsten carbide drills Ø1,5mm
1 x	High quality corundum grinding bits
1 x	Flap Wheels
1 x	Diamond Grinding Bits 1mm
1 x	MICROMOT Mains Adapter NG 2/S
1 x	High quality corundum grinding bits
1 x	Conjunto de três brocas de ponto
1 x	HSS drill bits 1.0mm
1 x	Diamond Grinding Bits 5mm
1 x	High quality corundum grinding bits
1 x	BeeHive208S
1 x	TORX-screwdrivers T10
1 x	Sanding Drums
1 x	Diamond Cutting Discs
1 x	High quality corundum grinding bits
1 x	HSS twist drill set to DIN 338
1 x	HSS drill bits 0.5mm
1 x	High quality corundum grinding bits
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Diamond Grinding Bits 1,8mm
1 x	High quality corundum grinding bits
1 x	Ball-shaped diamond coated 2.2mm
1 x	Ball-shaped diamond coated 1.2mm
1 x	High quality corundum grinding bits
1 x	Diamond Cutting Discs
1 x	Sanding Discs
1 x	Diamond Cutting Discs
1 x	HSS drill bits 1.6mm
1 x	Tungsten carbide drills Ø1mm
1 x	Tungsten carbide drills Ø2mm
1 x	Flap Wheels
1 x	Nylon Fleece Brushes
1 x	HSS twist drill set with centring pin
1 x	TORX-screwdrivers T15
1 x	Sanding Drums
1 x	TORX-screwdrivers T10
1 x	High quality corundum grinding bits
1 x	MICROMOT Mains Adapter NG 5/E
1 x	TORX-screwdrivers T20
1 x	Sanding bands 14x13mm
1 x	Diamond Cutting Discs
1 x	Diamond Twist Drills
1 x	HSS drill bits 1.2mm
1 x	Wolfram vanadium steel milling bits
1 x	Tungsten Carbide Tipped (TCT)
1 x	BGA-Bottom-106
1 x	Fibre-Cut Discs

€10,805.64