€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	centrically clamping 100mm
1 x	4-jaw chuck individually clamping 100mm
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Corundum bound cutting disc for LWS
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Tungstein carbide rasp - and cutting disc
2 x	Bandsaw blade of bimetal for MBS 240/E
1 x	CM2 - B16 - M10
1 x	Bench Circular Saw KS 230
1 x	4-jaw chuck individually clamping 80mm
1 x	Ball-shaped diamond coated 2.2mm
2 x	Polishing felt, medium hard
2 x	Band knife of hardened spring band steel (without teeth)
1 x	Belt sander BBS/S
1 x	3-jaw chuck centrically clamping 100mm
3 x	PLCC Puller
1 x	Belt sander BS/E
1 x	Fine dust paper filter for CW-matic
1 x	Precision quick-action drill chuck 0-16mm B16
1 x	4-jaw chuck individually clamping 125mm
1 x	3-jaw chuck centrically clamping 160mm
1 x	Corundum sanding discs for LWS
1 x	Self-adhesive white corundum sanding discs for TG 250/E
2 x	Blade for Steel and brass
1 x	Angle polisher WP/E
1 x	Fluted filter for CW-matic
1 x	centrically clamping 125mm
2 x	Aluminium Die-Cast
1 x	Corundum grinding disc for LWS
1 x	3-jaw chuck centrically clamping 80mm
1 x	Ball-shaped diamond coated 1.2mm
1 x	Spare cutting wire
3 x	Backing disc for LWS
1 x	Bench drill machine TBM 220
1 x	Diamond-coated cutting disc for MIC
1 x	Ball shaped milling cutters
2 x	14-piece parallel supports set
1 x	Corundum fan sander for LWS
1 x	Sanding fleece for LWS
1 x	Morse taper MT3 - B16
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	2-speed scroll saw DSH
1 x	Ball-shaped diamond coated 3.2mm
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	10-piece wood router cutter set
2 x	Footswitch FS
1 x	Corundum fan sander for LWS
1 x	Side cutters 160mm
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	MICROMOT tool holder
1 x	Flexishaft MICROMOT 110/P
1 x	Lambswool polishing disc
2 x	TU 1503V
1 x	Drill chuck with sliding sleeve for the tailstock
1 x
1 x	Grinding mop cylinder grit 120
2 x	Screwdriver bit set. 49-piece.
1 x	Super-fine sanding discs grain 400
2 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Precision steel vice PM 40
2 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Special Fused Alumina (Hardness N).
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	EUROline mini side cutter
2 x	TU 2404
1 x	sanding belts for BBS/s Grit 150
1 x	TU 2004V
1 x	Protective device for hand-operated MICROMOT
1 x	Cutting disc, with reinforcement
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Insulation Resistance Tester MG125
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Microfibre cloth
1 x	Gear Chuck
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Saw blade made of high-alloy special steel
1 x	Super-fine sanding discs grain 000
1 x	Dividing attachment TA 230 for PF 250
1 x	Three-jaw steel drill chuck
1 x	sanding belts for BBS/s Grit 240
1 x	Grinding mop cylinder grit 240
1 x	Precision caliper square
1 x	sanding belts for BBS/s Grit 80
1 x	Diamond blade
1 x	Diamond Coated
1 x	Professional polishing sponge
1 x	MICROMOT drill stand MB 200
1 x	Multiform grindstone
1 x	Super-Cut
1 x	Centre Turning Attachment
1 x	Machine Vice MS 4
1 x	MICROMOT extension cord. 300cm.
1 x	Five piece HSS chisel set
1 x	HSS boring tool set, 6 pieces
1 x	MICROMOT steel collet set
1 x	Solid carbide saw blade
1 x	Universal polishing paste
1 x	Blade guides separately
1 x	Collet Set for accurate use on round components
1 x	Tungsten Carbide Tipped (TCT)
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Blade for Wood and Plastics
2 x	Tweezer teflon-coated 5-107-9
1 x	Three piece thread cutting set
1 x	Step clamps made of steel
1 x	Insulation Resistance Tester MG500
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Replacement glue sticks for HKP 220
1 x	Super safety and specialty bit set, 75-piece
1 x	Tweezer teflon-coated 5-021-9
1 x	Grinding mop cylinder grit 80
1 x	Replacement carving blades for MSG
1 x	Silicon-Carbide.
1 x	Super-fine sanding discs grain 2000
1 x	Diamond blade for MBS 240/E
2 x	Micro Compound Table KT 70
1 x	Mill/Drill Unit BFB 2000.
1 x	Fixed Steady
2 x	Universal and oil siphoning pump AP 12
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	IC tweezers
1 x	Ceramic tweezers 5-081
1 x	Precision lathe PD 250/E
1 x	sandpaper for PS 13 Grot 180
1 x	sandpaper for PS 13 Grit 400
1 x	Professional set for finish grinding and polishing
1 x	PLCC Extractor
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Tungsten carbide cutters set
1 x	Three jaw chuck for the lathe DB 250
1 x	BGA-Bottom-10
1 x	BGA-Bottom-115
2 x	MICROMOT Mains Adapter NG 2/S
1 x	BeeProg2
1 x	BGA-0245/0243
1 x	Dial gauge
1 x	Multipurpose Vices Primus 75
1 x	Replacement belts for BSL 220/E
1 x	BGA-Bottom-103
1 x	CD-CLEANER 200ml
1 x	Precision caliper 500mm

€16,453.89