€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

1 x	Wheels brushes
2 x	Brass brushes
1 x	Steel cups
3 x	MICRO woodturning lathe DB 250
4 x	Cut off/mitre saw KGS 80
1 x	Steel wheels
3 x	Super-fine sanding discs grain 400
1 x	Stainless steel wheels
4 x	2-speed scroll saw DSH
1 x	Steel brushes
1 x	Stainless steel brushes
4 x	Thicknesser DH 40
2 x	Cups brushes
1 x	Stainless steel cups
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
2 x	Diamond Cutting Discs
1 x	Cutting tool 8 mm
1 x	HSS drill bits 0.8mm
1 x	Metal Cutting Blades
1 x	3-jaw chuck centrically clamping 100mm
1 x	Fibre-Cut Discs
1 x	Cutting tool 16 mm
1 x	Cylindrical cutters
1 x	Cutter head for copy and surface milling MT2
1 x	End side cutters EUROline-Conductive
2 x	Fibre-Cut Discs
2 x	Fibre-Cut Discs
2 x	Screwdriver bit set. 49-piece.
1 x	Tungsten carbide drills Ø2mm
2 x	HSS twist drill set with centring pin
2 x	Tungsten carbide cutters set
1 x	Diamond Cutting Discs
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	HSS drill bits 1.6mm
1 x	HSS drill bits 0.5mm
1 x	Tungsten carbide cutter 1.0mm
1 x	centrically clamping 125mm
1 x	HSS drill bits 1.2mm
2 x	Microfibre cloth
1 x	Fibre-Cut Discs
1 x	4-jaw chuck individually clamping 80mm
3 x	Conjunto de três brocas de ponto
1 x	4-jaw chuck individually clamping 125mm
1 x	Tungsten carbide cutter 3.0mm
1 x	Cutting tool 10 mm
1 x	Set of special steel cutters
1 x	DCMT070204
1 x	CM2 - B16 - M10
1 x	3-jaw chuck centrically clamping 80mm
1 x	HSS twist drill set to DIN 338
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Side cutters EUROline-Conductive
1 x	End milling cutter kit HSS 12 pcs
2 x	Cone shaped milling cutter
1 x	Dial gauge
1 x	Set of precision cutters
1 x	Wolfram vanadium steel milling bits
1 x	Cutting tool HM 20 mm
3 x	Super safety and specialty bit set, 75-piece
1 x	4-jaw chuck individually clamping 100mm
1 x	End side cutters 45º EUROline-Conductive
3 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Disc cutters
1 x	3-jaw chuck centrically clamping 160mm
1 x	Tungsten carbide cutter 2.0mm
2 x	Cylinder shaped milling cutters
1 x	MICROFLAM gas soldering set MGS
1 x	centrically clamping 100mm
1 x	HSS drill bits 1.0mm
1 x	Tungsten carbide drills Ø1mm
1 x	Wolfram vanadium steel milling bits
1 x	Mini side cutters EUROline-Conductive
1 x	Precision caliper square
1 x	Flame shaped milling cutters
1 x	Mini side cutters EUROline-Conductive
2 x	Diamond Cutting Discs
1 x	Mini side cutters EUROline-Conductive
1 x	Cutter head for copy and surface milling MT3
2 x	Fibre-Cut Discs
2 x	Diamond Cutting Discs
2 x	Ball shaped milling cutters
1 x	Fibre-Cut Discs
1 x	Tungsten carbide drills Ø1,5mm
1 x	Solid carbide stylus for engraving
1 x	Solid carbide stylus for engraving
1 x	Sanding Drums
4 x	Diamond Coated
2 x	High quality corundum grinding bits
1 x	Sanding Discs
1 x	Sanding Discs
4 x	Three jaw chuck for the lathe DB 250
1 x	Sanding Drums
2 x	Flap Wheels
2 x	Replacement belts for BSL 220/E
4 x	Replacement belts for BSL 220/E
1 x	High quality corundum grinding bits
3 x	High quality corundum grinding bits
1 x	Table Saw FET
1 x	High quality corundum grinding bits
1 x	Lambswool polishing disc
1 x	Sanding Drums
3 x	Tungsten Carbide Tipped (TCT)
1 x	High quality corundum grinding bits
3 x	PLCC Puller
2 x	Replacement belts for BSL 220/E
1 x	Sanding bands 14x13mm
2 x	IC tweezers
2 x	Drill chuck with sliding sleeve for the tailstock
2 x	High quality corundum grinding bits
1 x	Multipurpose Vices Primus 75
1 x	High quality corundum grinding bits
1 x	MICRO cutter MIC
1 x	Polishing felt, medium hard
2 x	Professional set for finish grinding and polishing
2 x	PLCC Extractor
1 x	MICRO shaper MP 400
1 x	Sanding Drums
1 x	Nylon Fleece Brushes
2 x	High quality corundum grinding bits
3 x	Flexible polishing pad set
1 x	Felt polishers
1 x	Flexible silicon discs
1 x	Felt polishers
1 x	Flexible silicon discs
2 x	Cotton polishers
1 x	Polishing paste
2 x	Five piece HSS chisel set
2 x	Cotton polishers
1 x	Felt polishers
2 x	Self-adhesive white corundum sanding discs for TG 125/E
2 x	Self-adhesive white corundum sanding discs for TG 125/E
2 x	Hot wire cutter THERMOCUT 12/E
2 x	Flexible silicon discs
1 x	Hot wire cutter THERMOCUT 230/E
3 x	Flexible polishing pad set
1 x	Super-Cut
1 x	Rounding over cutter 6.4mm
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Edge cutter with pin 6.4mm
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Slot cutter 6.5mm
2 x	Combi cutter 6.5/2.5mm
1 x	Blade guides separately
1 x	Complete Engraving Kit with trial glass
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	V-slot cutter 6.5mm
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Blade holders for DS 460
2 x	Angle cutter 45 °
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Half round cutter 13mm
1 x	Coarse-toothed (10 TPI per 25mm)
2 x	Chuck for TBM 220
1 x	Slot cutter 3.2mm
1 x	Blade for Wood and Plastics
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Rebating cutter 6.4mm
2 x	10-piece wood router cutter set
4 x	Centre Turning Attachment
1 x	Slot cutter 5.0mm
3 x	Universal and oil siphoning pump AP 12
1 x	Hot wire cutter THERMOCUT 650
1 x	MICROMOT steel collet set
1 x	HSS boring tool set, 6 pieces
1 x	Replacement carving blades for MSG
1 x	Diamond-coated cutting disc for MIC
2 x	Backing disc for LWS
1 x	Super-fine sanding discs grain 000
2 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Milling cutter set (6 - 10mm)
2 x	Cutting tools of high quality cobalt HSS steel, ground
2 x	Corundum grinding disc for LWS
2 x	Corundum sanding discs for LWS
2 x	Corundum sanding discs for LWS
2 x	Corundum fan sander for LWS
1 x	Polishing Set
1 x	Diamond-coated cutting and roughing disc
2 x	Corundum fan sander for LWS
1 x	Milling cutter set (2 - 5mm)
2 x	Three-jaw steel drill chuck
3 x	Flap Wheels
1 x	14-piece parallel supports set
1 x	Bandsaw blade of bimetal for MBS 240/E
2 x	Independent four jaw chuck for the DB 250
2 x	Dividing attachment TA 230 for PF 250
2 x	Felt cloth polishing disc (100 x 15mm)
1 x	Bench drill machine TBM 220
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Belt sander BBS/S
1 x	Ball-shaped diamond coated 2.2mm
1 x	Aluminium Die-Cast
1 x	Blade for Steel and brass
2 x	Compact workshop vacuum cleaner CW-matic
2 x	Step clamps made of steel
1 x	Bench Circular Saw KS 230
1 x	Belt sander BS/E
1 x	Ball-shaped diamond coated 3.2mm
1 x	Angle polisher WP/E
2 x	Pensander PS 13
2 x	Router base OFV
1 x	Bench drill press TBH
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Replacement glue sticks for HKP 220
1 x	Cutting disc, with reinforcement
1 x	Corundum bound cutting disc for LWS
1 x	Gear Chuck
1 x	Collet Set for accurate use on round components
1 x	Crosscut 'Super-Cut' blade
1 x	Core box bit 3.2mm
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Corundum grinding disc for LWS
1 x	Engraving tool GG
1 x	Cotton polishers
1 x	Microfibre polishing wheel, 15-ply (100mm)
2 x	Four Jaw Chuck
1 x	Tool holder for rotary tools
1 x	BGA-Bottom-101
1 x	BGA-0245/0243
1 x	BGA-Bottom-108
1 x	Flexishaft MICROMOT 110/P
1 x	BGA-0246/0243
1 x	BGA-Bottom-103
1 x	BGA-Bottom-11
1 x	BGA-Bottom-102
1 x	BGA-Bottom-1
1 x	Grinding mop cylinder grit 80
1 x	BGA-Bottom-10
1 x	BGA-0245/0241
1 x	Beeprog2C
1 x	Grinding mop cylinder grit 120

€16,358.64