€7,540.00 + VAT

BeeHive208S
[60-0054]

BeeHive208S

Extremely fast universal 8x 48-pin-drive Stand-Alone concurrent Production Programmer ( multiprogramming system )

Elnec fully understand needs of customers programming high volumes for which cost of adapters is one of most important component of costs. Therefore Elnec policy is to offer:

Short description:

supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
eight independent universal programming modules (BeeProg2 based) in one unit
extremely fast programming, one of the fastest programmers in this category. Programs 64-Mbit NOR Flash memory in less than 9 seconds and 1Gbit NAND Flash in less than 70 sec.
powerful independent pin-driver circuit for each and every pin of the programmer
in-circuit programming capability through ISP connector
graphics control unit with touch screen
very low voltage support for the latest Flash memory chips
ESD protection on each pin of the sockets
no adapter required for any DIL devices
Windows XP Embedded driven control PC internal to the programmer
unique quick reaction to customer\'s needs - software update can be ready within a day from request by OnDemand software
made in Slovakia
warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive208s/

Reviews

Shopping Cart

2 x	MICROMOT Mains Adapter NG 2/S
1 x	Slot cutter 6.5mm
2 x	Backing disc for LWS
1 x	Rounding over cutter 6.4mm
1 x	Super-fine sanding discs grain 000
2 x	MICROMOT Mains Adapter NG 5/E
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Beeprog2C
1 x	Slot cutter 5.0mm
1 x	Tungsten tipped saw blade
1 x	Saw blade made of high-alloy special steel
1 x	Super-fine sanding discs grain 2000
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	V-slot cutter 6.5mm
1 x	Edge cutter with pin 6.4mm
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Rebating cutter 6.4mm
1 x	Super-fine sanding discs grain 400
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Microfibre cloth
1 x	Diamond blade
1 x	Crosscut 'Super-Cut' blade
1 x	Professional polishing sponge
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Slot cutter 3.2mm
1 x	Combi cutter 6.5/2.5mm
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Lambswool polishing disc
1 x	Core box bit 3.2mm
1 x	10-piece wood router cutter set
1 x	Angle cutter 45 °
1 x	Solid carbide saw blade
2 x	Professional set for finish grinding and polishing
1 x	Polishing felt, medium hard
1 x	Half round cutter 13mm
1 x	Three jaw chuck for the lathe DB 250
1 x	Corundum fan sander for LWS
1 x	Sanding pads for OZI 220/E grit 240
1 x	Corundum bound cutting disc for LWS
1 x	HSS immersion saw blades for OZI
1 x	Independent four jaw chuck for the DB 250
1 x	Corundum grinding disc for LWS
1 x	Sanding fleece for LWS
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Replacement glue sticks for HKP 220
1 x	Diamond-coated cutting and roughing disc
1 x	Sanding pads for OZI 220/E grit 80
1 x	Five piece HSS chisel set
1 x	HSS immersion saw blades for OZI
1 x	Corundum grinding disc for LWS
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Diamond cutting blade for OZI
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Corundum fan sander for LWS
1 x	Sanding fleece for LWS
1 x	Fine dust paper filter for CW-matic
1 x	Diamond-coated cutting disc for MIC
1 x	Corundum sanding discs for LWS
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Fluted filter for CW-matic
1 x	HSS cutting blade for OZI
1 x	Sanding pads for OZI 220/E grit 150
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Corundum sanding discs for LWS
1 x	Tungstein carbide rasp - and cutting disc
1 x	Machine Vice MS 4
1 x	Blade guides separately
1 x	BGA-Bottom-111
1 x	BGA-Bottom-125
1 x	Step clamps made of steel
1 x	BGA-0245/0241
1 x	Diamond blade for MBS 240/E

€2,457.31