€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Sanding pads for OZI 220/E grit 80
1 x	Ceramic tweezers 5-082
1 x	Sanding pads for OZI 220/E grit 240
1 x	Combination pliers 210mm
1 x	Floor cover ESD
1 x	Combination pliers 205mm
1 x	Blade guides separately
1 x	Component tweezers 5-007
2 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Mini side cutters EUROline-Conductive
1 x	Component tweezers 5-009
1 x	Blade for Wood and Plastics
1 x	IC tweezers
1 x	Combination pliers 170mm
2 x	Felt cloth polishing disc (100 x 15mm)
1 x	Glass fibre contact cleaner brush
1 x	Blade for Steel and brass
1 x	Hand magnifier with LED light 3X
1 x	Mini side cutters EUROline-Conductive
1 x	Sanding pads for OZI 220/E grit 150
1 x	Component tweezers 5-013
2 x	Replacement belts for BSL 220/E
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Diamond cutting blade for OZI
1 x	EUROline side cutter rounded head
1 x	Hand Magnifier 2-293
2 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Flat nose pliers 165mm
1 x	Ceramic-tipped tweezers and ESD 5-096
1 x	Screwdriver 1.5
1 x	EUROline top cutter
1 x	Component tweezers 5-008
1 x	Crimping plier for BNC
1 x	Glass fibre contact cleaner brush
2 x	Replacement belts for BSL 220/E
2 x	Universal polishing paste
1 x	Flat nose pliers 160mm
1 x	Handy 1515
1 x	HSS immersion saw blades for OZI
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	Component tweezers 5-006
1 x	HSS immersion saw blades for OZI
1 x	Combination pliers 185mm
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Inspector mirror
1 x	Combination pliers 160mm
1 x	Motor-driven carving device MSG
1 x	Ceramic-tipped tweezers and ESD 5-095
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Contact bracelet with spiral cord
1 x	Combination pliers 190mm
1 x	Conj 5 pinças ESD
1 x	Diamond blade
1 x	sanding belts for BBS/s Grit 150
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	sanding belts for BBS/s Grit 240
1 x	Replacement belts for BSL 220/E
1 x	Solid carbide saw blade
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Tungsten Carbide Tipped (TCT)
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Crosscut 'Super-Cut' blade
1 x	Replacement belts for BSL 220/E
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Cutting disc, with reinforcement
1 x	Saw blade made of high-alloy special steel
1 x	Tungsten tipped saw blade
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x	DUSTER-BR 200ml
1 x	DIL48/PQFP100 ZIF ST10-1
1 x	DIL48/PQFP100 ZIF PLD-1
1 x	Warding files set, 6pcs
1 x	EUROline mini side cutter
1 x	DIL48/PQFP144 ZIF ST10-1
1 x	DIL48/PQFP100 ZIF ST92Fxxx
1 x	DIL40/VQFP64 ZIF AWM-1
1 x	Machine Vice MS 4
1 x	DIL48/PQFP80 ZIF M58BW-1
1 x	Earth wire with dummy Schunko-plug
1 x	DIL28/TSSOP28 ZIF 170mil
1 x	BGA-Bottom-101
1 x	DIL32/MLF32-1 ZIF
1 x	Half round cutter 13mm
1 x	DIL8/SSOP8 ZIF 120mil
1 x	DIL8/QFN8-1 ZIF-CS
1 x	BGA-Bottom-108
1 x	DIL44/MLF44-1 ZIF-CS
1 x	BGA-Bottom-115
1 x	BGA-0246/0243
1 x	BGA-0245/0242
1 x	DIL48/SSOP56 ZIF Flash-1
1 x	PLCC Puller
1 x	BGA-Bottom-118
1 x	DIL44/SSOP44 ZIF 240mil
1 x	Milling cutter set (2 - 5mm)
1 x	Slot cutter 5.0mm
1 x	V-slot cutter 6.5mm
1 x	Delta sander OZI/E
1 x	BGA-Bottom-106
1 x	DIL48/QFN48 ZIF-CS
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Slot cutter 3.2mm
1 x	DIL48/SSOP56 ZIF Flash-2
1 x	BGA-Bottom-102
1 x	Top PSOP44 ZIF 600mil
1 x	Slot cutter 6.5mm
1 x	BGA-Bottom-11

€7,255.36