€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Cylinder shaped milling cutters
2 x	Felt polishers
1 x	Flexible silicon discs
2 x	Polishing paste
1 x	Cylindrical cutters
1 x	High quality corundum grinding bits
1 x	Disc cutters
1 x	Set of precision cutters
1 x	Wolfram vanadium steel milling bits
1 x	High quality corundum grinding bits
1 x	Solid carbide stylus for engraving
3 x	Cotton polishers
2 x	Cotton polishers
2 x	Ball shaped milling cutters
1 x	Felt polishers
1 x	Cone shaped milling cutter
2 x	Flexible polishing pad set
1 x	Flexible silicon discs
3 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
2 x	Tungsten carbide cutters set
3 x	Cotton polishers
1 x	Tungsten carbide cutter 2.0mm
3 x	High quality corundum grinding bits
1 x	Flame shaped milling cutters
3 x	High quality corundum grinding bits
1 x	Tungsten carbide cutter 3.0mm
1 x	HSS drill bits 0.8mm
1 x	Metal Cutting Blades
4 x	Diamond Cutting Discs
1 x	HSS twist drill set to DIN 338
2 x	Fibre-Cut Discs
1 x	Tungsten carbide drills Ø1,5mm
2 x	Fibre-Cut Discs
1 x	Fibre-Cut Discs
2 x	Fibre-Cut Discs
3 x	Diamond Cutting Discs
1 x	Tungsten carbide drills Ø1mm
2 x	Fibre-Cut Discs
4 x	Diamond Cutting Discs
1 x	Fibre-Cut Discs
1 x	HSS drill bits 1.6mm
1 x	Tungsten carbide drills Ø2mm
1 x	Diamond Cutting Discs
3 x	Conjunto de três brocas de ponto
1 x	HSS drill bits 0.5mm
2 x	HSS twist drill set with centring pin
1 x	HSS drill bits 1.0mm
2 x	Ball-shaped diamond coated 1.2mm
1 x	Rebating cutter 6.4mm
1 x	Half round cutter 13mm
1 x	Slot cutter 5.0mm
1 x	Combi cutter 6.5/2.5mm
1 x	Diamond Grinding Bits 1mm
1 x	Rounding over cutter 6.4mm
2 x	Steel cups
1 x	Slot cutter 6.5mm
2 x	Ball-shaped diamond coated 2.2mm
1 x	Slot cutter 3.2mm
2 x	Angle cutter 45 °
2 x	Wheels brushes
2 x	Stainless steel brushes
2 x	Steel wheels
1 x	Diamond Grinding Bits 5mm
2 x	Stainless steel cups
1 x	Edge cutter with pin 6.4mm
1 x	V-slot cutter 6.5mm
2 x	Stainless steel wheels
1 x	10-piece wood router cutter set
2 x	Ball-shaped diamond coated 3.2mm
2 x	Core box bit 3.2mm
1 x	Diamond Grinding Bits 1,8mm
3 x	Precision steel vice PM 40
2 x	Cutting tools of high quality cobalt HSS steel, ground
3 x	TIP SPT-6
2 x	Cups brushes
1 x	Crosscut 'Super-Cut' blade
2 x	Corundum grinding disc for LWS
2 x	Corundum fan sander for LWS
2 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Cutting disc, with reinforcement
2 x	Corundum sanding discs for LWS
3 x	Hot wire cutter THERMOCUT 230/E
2 x	Corundum fan sander for LWS
1 x	Corundum grinding disc for LWS
2 x	Corundum sanding discs for LWS
1 x	Cut off/mitre saw KGS 80
2 x	6-piece screwdriver and cross-recess set
3 x	Hot wire cutter THERMOCUT 650
1 x	HSS boring tool set, 6 pieces
1 x	Flexible polishing pad set
3 x	Multipurpose Vices Primus 75
1 x	Milling cutter set (6 - 10mm)
1 x	Milling cutter set (2 - 5mm)
2 x	TIP SPT-10
2 x	MICROMOT steel collet set
2 x	High quality corundum grinding bits
2 x	Replacement carving blades for MSG
2 x	Precision Vice FMZ
2 x	Multipurpose Vices Primus100
1 x	Bench drill press TBH
1 x	Aluminium Die-Cast
2 x	6-piece TORX-screwdriver-set
2 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x	Bench Circular Saw KS 230
1 x	Blade for Steel and brass
1 x	14-piece parallel supports set
2 x	6-piece screwdriver and cross-recess set
2 x	6-piece screwdriver and cross-recess set
1 x	Bench drill machine TBM 220
2 x	Backing disc for LWS
1 x	2-speed scroll saw DSH
1 x	Diamond-coated cutting disc for MIC
1 x	Antiallergical Tweezers 5-121-1
1 x	Brass contact cleaner brush
1 x	Broca de alta duração de 2.2mm
1 x	Antiallergical Tweezers 5-107-1
1 x	Thicknesser DH 40
1 x	Diamond Coated
1 x	Professional set for finish grinding and polishing
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Broca de alta duração de 2.7mm
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	TIP SPT-9
1 x	Broca de alta duração de 2.4mm
1 x	Machine Vice MS 4
1 x	Broca de alta duração de 3.0mm
1 x	Precision Vice FMS 75
1 x	ACCENT SERVICE TOOLS SET
1 x	Ceramic tweezers 5-081
1 x	Polishing Set
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Antiallergical Tweezers 5-155-1
1 x	POLISHER 200ml
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Antiallergical Tweezers 5-117-1
1 x	Broca de alta duração de 2.8mm
1 x	Super safety and specialty bit set, 75-piece
1 x	6pcs Double Open End wrench set
2 x	Broca de alta duração de 2.6mm
1 x	6-piece screwdriver set ESD
1 x	6-piece socket wrenches ESD
1 x	TIP SPT-4
1 x	6-piece screwdriver and cross-recess set ESD
1 x	6-piece wrench key set ESD
1 x	TIP SPT-3
1 x	Antiallergical Tweezers 5-125-1
1 x	6-piece TORX-screwdriver-set ESD
1 x	6-piece set of ESD/EGB tweezers
1 x	Hot wire cutter THERMOCUT 12/E
2 x	Warding files set, 6pcs
3 x	Pinça SOIC de 8 pinos
1 x	Lathe tools 8mm pastilhados
1 x	OPTI BF20L VARIO
2 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x	sanding belts for BBS/s Grit 80
1 x	Safety Insulated Phillips Screwdriver 14-631VDE
1 x	Handy 1515
2 x	Glass fibre contact cleaner brush
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Broca de ponto 3.15 x 1.25
1 x	sanding belts for BBS/s Grit 240
3 x	IC Test clip 20 pins
1 x	Insulation Resistance Tester MG125
1 x	lathe tools 10mm
1 x	Insert CCGT060202-AK
1 x	Multiform grindstone
1 x	sanding belts for BBS/s Grit 150
1 x	Insert CCGT120404-AK
1 x	SmartProg2
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	SCLCR1010E06
1 x	Three-jaw steel drill chuck
1 x	sclcr2525M12
1 x	BGA-Bottom-11
1 x	centrically clamping 100mm
1 x	Cutter head for copy and surface milling MT2
1 x	Digital caliper gauge 300 mm
1 x	Centre Turning Attachment
1 x	MICRO Miller FF 230
1 x	Four Jaw Chuck
1 x	Safety Insulated Pozidriv Screwdriver 14-644VDE
1 x	Blade holders for DS 460
1 x	End milling cutter kit HSS 12 pcs
1 x	Cutting tool HM 20 mm
1 x	3-jaw chuck centrically clamping 160mm
1 x	Sanding bands 14x13mm
1 x	Diamond cutting blade for OZI
1 x	Collet Set for accurate use on round components
1 x	BeeHive204
1 x	Tool holder for rotary tools
1 x	BGA-0246/0244
1 x	BGA-Bottom-105
1 x	MICRO Miller FF 500
1 x	Sanding pads for OZI 220/E grit 150
1 x	BGA-Bottom-118
1 x	Sanding bands 14x13mm
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Cutter head for copy and surface milling MT3
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Gear Chuck
1 x	DCMT070204
1 x	CM2 - B16 - M10
1 x	Compact workshop vacuum cleaner CW-matic
1 x	BGA-Bottom-111
1 x	BGA-Bottom-10
1 x	BGA-Bottom-101
1 x	3-jaw chuck centrically clamping 125mm
2 x	Table Saw TKS 2500 SC
1 x	Glass fibre contact cleaner brush
1 x	centrically clamping 125mm
1 x	BGA-Bottom-125
1 x	4-jaw chuck individually clamping 80mm
1 x	Fixed Steady
1 x	VIDEOCLEAN 200ml
1 x	BGA-Bottom-108
1 x	3-jaw chuck centrically clamping 80mm
1 x	BGA-Bottom-106
1 x	CD-CLEANER 200ml
1 x	BGA-Bottom-103
1 x	Cutting tool 16 mm
1 x	BGA-Bottom-1
1 x	Brass brushes
1 x	BGA-0245/0241
1 x	3-jaw chuck centrically clamping 100mm
1 x	BGA-0245/0243
1 x	Table Sawr TKS 315 E
1 x	BGA-Bottom-115
1 x	MICRO Miller MF 70

€25,283.21