€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Cross-recess Screwdrivers Pozidriv 1
1 x	Safety insulated screwdrivers 14-604 VDE
1 x	Safety insulated screwdrivers 14-602 VDE
1 x	Safety insulated screwdrivers 14-606 VDE
1 x	Safety Insulated Phillips Screwdriver 14-632VDE
1 x	Screwdriver 5.5
1 x	Screwdriver 2.5
1 x	Safety Insulated Phillips Screwdriver 14-631VDE
1 x	Screwdriver 3.0
1 x	Safety insulated screwdrivers 14-601 VDE
1 x	Cross-recess Screwdrivers Pozidriv 2
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x	Safety insulated screwdrivers 14-608 VDE
1 x	Safety insulated screwdrivers 14-603 VDE
1 x	Screwdriver 4.0
1 x	Cross-recess Screwdrivers 0
1 x	ESD Brushe
2 x	Broca de alta duração de 2.5mm
1 x	Round nose pliers 185mm
1 x	Combination pliers 210mm
3 x	Broca de alta duração de 1.3mm
1 x	Tungstein carbide rasp - and cutting disc
3 x	Broca de alta duração de 0.5mm
1 x	SCLCR1010E06
1 x	Super-fine sanding discs grain 000
1 x	Snipe nose pliers 45º EUROline-Conductive
2 x	EUROline mini side cutter
1 x	Replacement belts for BSL 220/E
4 x	Broca de alta duração de 1.2mm
1 x	Diamond-coated cutting and roughing disc
1 x	EUROline end cutter
1 x	EUROline set of pliers
2 x	6-piece screwdriver and cross-recess set
1 x	Combination pliers 170mm
1 x	ESD Tweezers 5-191
1 x	Corundum fan sander for LWS
1 x	Grinding mop cylinder grit 80
2 x	BIT-SET
1 x	Snipe nose pliers 45º EUROline-Conductive
3 x	Broca de alta duração de 2.2mm
1 x	ESD Tweezers 5-194
3 x	Broca de alta duração de 0.9mm
2 x	Broca de alta duração de 2.1mm
3 x	Broca de alta duração de 1.4mm
3 x	Broca de alta duração de 0.7mm
1 x	Cylinder sander WAS/E
2 x	6-piece screwdriver and cross-recess set
2 x	Combination pliers 185mm
3 x	Broca de alta duração de 2.3mm
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
2 x	ESD-handling ser 9-361
3 x	Broca de alta duração de 0.3mm
1 x	EUROline round nose pliers
1 x	Round nose pliers 45º EUROline-Conductive
1 x	EUROline side cutter pointed head
1 x	EUROline flat nose pliers
1 x	Replacement belts for BSL 220/E
1 x	Insert CCGT120404-AK
2 x	Broca de alta duração de 2.4mm
1 x	Cross-recess Screwdrivers 0
1 x	Flat nose pliers 45º EUROline-Conductive
2 x	Combination pliers 160mm
2 x	Broca de alta duração de 2.0mm
1 x	ESD Tweezers 5-195
2 x	Three piece thread cutting set
1 x	Grinding mop cylinder grit 120
1 x	Broca de ponto 3.15 x 1.25
2 x	Replacement belts for BSL 220/E
3 x	Broca de alta duração de 1.1mm
2 x	Combination pliers 205mm
1 x	EUROline mini side cutter
1 x	Replacement belts for BSL 220/E
1 x	ESD Tweezers 5-193
1 x	Round nose pliers 165mm
1 x	magnetic base 80kg
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Professional set for finish grinding and polishing
3 x	Broca de alta duração de 0.4mm
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	EUROline mini side cutter
1 x	Broca de alta duração de 0.8mm
1 x	Insert CCGT060202-AK
1 x	Combination pliers 190mm
2 x	Broca de alta duração de 1.0mm
2 x	6-piece screwdriver and cross-recess set
1 x	Solid carbide saw blade
3 x	Diamond blade
2 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Handy 1515
1 x	V-slot cutter 6.5mm
1 x	PLCC Extractor
2 x	Crosscut 'Super-Cut' blade
1 x	Broca de alta duração de 1.5mm
1 x	Telephon pliers straight 200mm
1 x	Telephon pliers bent 160mm
1 x	Lathe System PD 400
1 x	Wire strippers 160mm
1 x	Precision lathe PD 250/E
1 x	HSS boring tool set, 6 pieces
1 x	Three jaw chuck for the lathe DB 250
1 x	Round nose pliers 160mm
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Router base OFV
1 x	Flat nose pliers 160mm
1 x	Flap Wheels
1 x	Telephon pliers straight 160mm
1 x	Five piece HSS chisel set
1 x	broca de alta duração de 0,6mm
1 x	DIL28/TSSOP28 ZIF 170mil
1 x	Saw blade made of high-alloy special steel
1 x	Telephon pliers bent 200mm
1 x	Telephone pliers bent 205mm
1 x	Side cutters 160mm
1 x	Side cutters 180mm
1 x	DIL24/TSSOP24 ZIF 170mil
1 x	6-piece TORX-screwdriver-set
1 x	MICROFLAME burner MFB/E
1 x	DIL16/SOIC16-1 ZIF 170mil
1 x	DIL44/SSOP44 ZIF 240mil
1 x	BGA-0246/0244
1 x	Stainless steel wheels
1 x	DIL28W/SOIC28 ZIF 300mil
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)

€7,280.53