€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

1 x	Replacement belts for BSL 220/E
1 x	MICRO Band Saw MBS 240/E
1 x	PLCC Puller
1 x	Grinding mop cylinder grit 80
1 x	Bench Circular Saw KS 230
1 x	Replacement glue sticks for HKP 220
1 x	Surface planer AH 80
1 x	MICRO shaper MP 400
1 x	Table Saw FET
1 x	Jig saw STS 12/E
1 x	Scroll saw DS 230/E
1 x	Thicknesser DH 40
1 x	Replacement belts for BSL 220/E
1 x	MICRO cutter MIC
1 x	IC tweezers
1 x	MICRO woodturning lathe DB 250
1 x	Super jig saw STS/E
1 x	Replacement belts for BSL 220/E
1 x	Motor-driven carving device MSG
1 x	2-speed scroll saw DSH
1 x	Replacement belts for BSL 220/E
1 x	Cut off/mitre saw KGS 80
1 x	PLCC Extractor
1 x	BGA-Bottom-11
1 x	Belt sander BS/E
1 x	Grinding mop cylinder grit 120
1 x	Diamond blade
1 x	Polishing machine PM 100
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Crosscut 'Super-Cut' blade
1 x	BGA-Bottom-101
1 x	Grinding and Polishing Machine SP/E
1 x	BGA-Bottom-111
1 x	BeeHive208S
1 x	BGA-Bottom-102
1 x	Disc Sander TG 125/E
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Cutting disc, with reinforcement
1 x	Blade for Steel and brass
1 x	BGA-0245/0242
1 x	Beeprog2C
1 x	BGA-Bottom-103
1 x	BGA-0245/0241
1 x	Grinding mop cylinder grit 120
1 x	BGA-Bottom-108
1 x	Blade guides separately
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Diamond-coated cutting and roughing disc
1 x	Hot wire cutter THERMOCUT 650
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Belt sander BBS/S
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Solid carbide saw blade
1 x	Tungsten Carbide Tipped (TCT)
1 x	Grinding mop cylinder grit 240
1 x	BGA-Bottom-106
1 x	BGA-0246/0244

€14,276.19