€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Milling cutter set (6 - 10mm)
1 x	Socket Wrenches 4.5
1 x	TORX-screwdrivers T6
1 x	TORX-screwdrivers T8
1 x	SCREEN 200ml
1 x	TORX-screwdrivers T7
1 x	TORX-screwdrivers T4
1 x	PROLUB 200ml
2 x	OPTI BF20 VARIO
1 x	Replacement belts for BSL 220/E
3 x	SPRAYFLON 200ml
2 x	OPTI BF16 Vario
1 x	Ceramic-tipped tweezers and ESD 5-096
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	Replacement belts for BSL 220/E
1 x	Socket Wrenches 3.5
3 x	SPRAYOIL 200ml
1 x	PROTECTION 200ml
1 x	ESD Tweezers 5-193
1 x	Cutting tool 8 mm
1 x	Fine dust paper filter for CW-matic
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	TORX-screwdrivers T10
1 x	Replacement belts for BSL 220/E
1 x	OPTI BF20L VARIO
1 x	ESD Tweezers 5-195
1 x	ESD Tweezers 5-192
1 x	6-piece set of ESD/EGB tweezers
1 x	TORX-screwdrivers T5
1 x	Replacement belts for BSL 220/E
1 x	Cutter head for copy and surface milling MT2
1 x	Lathe tools 10mm pastilhados
1 x	Lathe tools 8mm pastilhados
1 x	TORX-screwdrivers T10
1 x	Band knife of hardened spring band steel (without teeth)
1 x	ESD Tweezers 5-191
1 x	Fluted filter for CW-matic
1 x	BeeProg2
1 x	Cross-recess Screwdrivers 2
1 x	Cross-recess Screwdrivers 000
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Cross-recess Screwdrivers 2
1 x	Sanding pads for OZI 220/E grit 80
1 x	Wrench Keys 1.5
1 x	HSS immersion saw blades for OZI
1 x	TU 2004V
1 x	Snipe nose pliers 45º EUROline-Conductive
2 x	Mini side cutters EUROline-Conductive
1 x	BGA-Bottom-10
1 x	MULTI 200ml
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	BGA-0245/0242
1 x	FREEZER-TOP 200ml
1 x	Supercut jig saw blades of special steel
1 x	Mini side cutters EUROline-Conductive
1 x	IC tweezers
1 x	EUROline-Conductive set of pliers
1 x	Round nose pliers 45º EUROline-Conductive
1 x	VASELINE 200ml
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Morse taper MT2 - B16
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Antiallergical Tweezers 5-121-1
1 x	Diamond cutting blade for OZI
1 x	Antiallergical Tweezers 5-125-1
1 x	Mini side cutters EUROline-Conductive

€12,175.72