€395.00 + IVA

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Comentários

Categorias

Marcas

Informações

1 x	Torno MS4 para coluna
1 x	Disco de corte diamantado
1 x	Disco de corte em corindo para LWS
1 x	Fio de corte de reposição para Thermocut 230/E
1 x	Disco auto aderente grão 80 para LWS
1 x	Cintas de lixa grão 180 para BSL220/E
1 x	Cintas de lixa grão 120 para BSL220/E
3 x	Tungstein carbide rasp - and cutting disc
1 x	Disco de feltro grão fino para LWS
1 x	Disco de polir em lã
1 x	Discos de lixa grão 400
1 x	Transformador MICROMOT NG 2/S 12V-2A
1 x	Disco de polir em feltro, medio
1 x	Lamina em aço rápido HSS
1 x	Boina de Polir em Musselina Tratada
1 x	Lâmina tipo faca (sem dentes) em aço temperado
1 x	Lâmina diamantada para MBS 240/E
1 x	Four Jaw Chuck
1 x	Broca de alta duração de 2.2mm
1 x	Fixed Steady
1 x	Broca de alta duração de 2.9mm
1 x	Broca de alta duração de 2.1mm
1 x	Lixa para BBS/S grão 80
1 x	Tambor de lixa Grão 120
1 x	Lixadeira de tambor WAS/E
1 x	Broca de alta duração de 0.4mm
1 x	Aspirador SAA 901
1 x	Ponto rotativo CM2
1 x	Garlopa-Desengrossadeira ADH 250
1 x	Disco de corindo lamelados grão 240 para LWS
1 x	Broca de alta duração de 0.7mm
1 x	Tambor de lixa Grão 80
1 x	Base magnética 80kg
1 x	Base tupia OFV
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-5
1 x	BGA-Bottom-108
1 x	BGA-0245/0243
1 x	BeeHive208S
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-6
1 x	Conj. de 6 limas cabo de madeira
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x	Tambor em velo
1 x	Con. chaves bocas finas
1 x	Broca de ponto 3.15 x 1.25
1 x	BGA-Bottom-195
1 x	Broca de ponto 5.00 x 2.00
1 x	BGA-Bottom-127
1 x	BGA-Bottom-191

€10,377.68