CM2 - B16 - M10, Oficina-digital.com

Top » Catalog » Lathes » Optimum-Quantum accessories » Morse taper » 3050670

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
  Acessories for OPTI D250X550
  Cutting tools->
  Optimum Lathes
  Optimum-Quantum accessories->
    Chuck->
    drill chuck
    Morse taper
    Quick-action tool holder
    Revolving center
  Proxxon Lathes
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	6-piece screwdriver and cross-recess set ESD
1 x	6-piece TORX-screwdriver-set
1 x	Combination pliers 185mm
1 x	Ceramic-tipped tweezers and ESD 5-096
1 x	6-piece screwdriver and cross-recess set
1 x	BIT-SET
1 x	Conj 5 pinças ESD
1 x	Screwdriver 1.2
1 x	Ceramic-tipped tweezers and ESD 5-095
1 x	CRIMPING PLIERS/WIRE STRIPPER
3 x	RT100 - Horizontal-vertical circular dividing table
1 x	Cross-recess Screwdrivers 000
1 x	ACCENT SERVICE TOOLS SET
1 x	6-piece screwdriver set ESD
1 x	Screwdriver 1.5
1 x	Brass contact cleaner brush
1 x	Screwdriver 2.0
1 x	Cross-recess Screwdrivers 1
1 x	Antiallergical Tweezers 5-121-1
1 x	Grinding mop cylinder grit 240
1 x	Cross-recess Screwdrivers 1
1 x	Grinding mop cylinder grit 120
1 x	surface planing and thicknessing ADH 200
1 x	Dial gauge
1 x	Diamond-coated cutting disc for MIC
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Independent four jaw chuck for the DB 250
1 x	Three jaw chuck for the lathe DB 250
1 x	Chuck for TBM 220
1 x	Self-adhesive white corundum sanding discs for TG 125/E
2 x	EUROline snipe nose pliers
1 x	EUROline round nose pliers
1 x	EUROline set of pliers
1 x	EUROline end cutter
1 x	MULTI 200ml
1 x	Surface planer AH 80
1 x	Polishing machine PM 100
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	RT150 - Horizontal-vertical circular dividing table
1 x	IT 200 - Indirect dividing attachment
1 x	Flap Wheels
1 x	Milling cutter set (6 - 10mm)
1 x	RT200 - Horizontal-vertical circular dividing table
1 x	Milling cutter set (2 - 5mm)
2 x	MICRO woodturning lathe DB 250
2 x
2 x	Felt cloth polishing disc (100 x 15mm)
1 x	TIP SPT-3
1 x	TIP SPT-2
1 x	TIP SPT-6
1 x	TIP SPT-4
1 x	Fine dust paper filter for CW-matic
1 x	Universal polishing paste
1 x	Bench Circular Saw KS 230
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	MICRO Band Saw MBS 240/E
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Rounding over cutter 6.4mm
1 x	Edge cutter with pin 6.4mm
1 x	V-slot cutter 6.5mm
1 x	Core box bit 3.2mm
1 x	Slot cutter 6.5mm
1 x	Slot cutter 5.0mm
1 x	Combi cutter 6.5/2.5mm
2 x	Vacum SAA 901
1 x	Half round cutter 13mm
1 x	Belt sander BBS/S
2 x	Collet Set for accurate use on round components
1 x	Radius Cutting Attachment, complete with pointed tool
2 x	Centre Turning Attachment
2 x	Fixed Steady
1 x	Gear Chuck
1 x	Four Jaw Chuck
1 x	Screwdriver bit set. 49-piece.
1 x	Replacement glue sticks for HKP 220
1 x	Diamond Twist Drills
1 x	Ball-shaped diamond coated 3.2mm
1 x	Diamond Grinding Bits 1,8mm
1 x	Diamond Grinding Bits 5mm
1 x	Diamond Cutting Discs
1 x	Diamond Grinding Bits 1,8mm
1 x	Diamond Cutting Discs
1 x	Ball-shaped diamond coated 2.2mm
1 x	Ball-shaped diamond coated 1.2mm
1 x	Long neck angle grinder LHW
1 x	Flexible silicon discs
1 x	Flexible silicon discs
1 x	sclcr2525M12
1 x	Cotton polishers
1 x	Flexible polishing pad set
1 x	Felt polishers
1 x	4-jaw chuck individually clamping 125mm
1 x	Steady rest for D250X550
1 x	Cutting tool 10 mm
1 x	Collet chuck ER25 for D250X550
1 x	Tool holder type H for SWH 1-A
1 x	quantum revolving center CM2
1 x	3-jaw chuck centrically clamping 125mm
1 x	Lathe tools 10mm pastilhados
1 x	Lathe chuck flange for D250X550

€7,461.03