Top » Catalog » Programmers and acessories » Universal programmers » 60-0059

€859.00 + VAT

Beeprog2C
[60-0059]

Very fast universal USB/LPT interfaced programmer.

If you re focused to maximal speed of programing, see please at extremely fast BeeProg2C programmer.

Short description:

supported devices from manufactures
extremely fast programming, one of the fastest programmers in this category. Sustainable programming speed greater than 5 MBytes per second. Programs 2 GB eMMC NAND Flash in less than 365 sec.
48-pins powerful pindrivers, no adapter required for any DIL devices
ISP connector for in-circuit programming
connection to PC: USB 2.0 (up to 480 Mbit/s, high speed/full speed) and 1.1 compatible interface
after upgrade to BeeProg2, also high-speed IEEE 1284 (ECP/EPP) printer-port (LPT) interface is available
comfortable and easy to use control program, works with all versions of MS Windows from Windows XP to Windows 10 (32-bit and 64-bit*)
unique quick reaction to customer's needs - software update can be ready within a day from request by OnDemand software
Multiprogramming possible by attaching more programmers to one PC
made in Slovakia
warranty - 3 years

More Information here: http://www.elnec.com/products/universal-programmers/beeprog2c/

Reviews

Customers who bought this product also purchased

BGA-Top-5 ZIF-CS

BGA-Bottom-88

DIL44/PSOP44 ZIF 600 mil

Shopping Cart

2 x	Footswitch FS
1 x	Flexishaft MICROMOT 110/BF
1 x	Aluminium Die-Cast
1 x	Chuck for TBM 220
1 x	Tool holder for rotary tools
1 x	Universal and oil siphoning pump AP 12
1 x	Super safety and specialty bit set, 75-piece
1 x	Mini side cutters EUROline-Conductive
1 x	Protective device for hand-operated MICROMOT
1 x	Mill/Drill Unit BFB 2000.
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Four Jaw Chuck
1 x	Spare cutting wire
2 x	Micro Compound Table KT 70
1 x	Screwdriver bit set. 49-piece.
1 x	Dividing attachment TA 230 for PF 250
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	surface planing and thicknessing ADH 200
1 x	Round nose pliers 45º EUROline-Conductive
1 x	Sanding pads for OZI 220/E grit 80
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Centre Turning Attachment
1 x	EUROline-Conductive set of pliers
1 x	MICROMOT extension cord. 300cm.
1 x	HSS cutting blade for OZI
1 x	MICROMOT drill stand MB 200
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Gear Chuck
1 x	End side cutters 45º EUROline-Conductive
1 x	Diamond cutting blade for OZI
1 x	Mini side cutters EUROline-Conductive
1 x	Fixed Steady
1 x	Side cutters EUROline-Conductive
1 x	Mini side cutters EUROline-Conductive
1 x	14-piece parallel supports set
1 x	Collet Set for accurate use on round components
1 x	Flexishaft MICROMOT 110/P
2 x	Lathe System PD 400
1 x	HSS immersion saw blades for OZI
1 x	MICROMOT tool holder
1 x	Sanding pads for OZI 220/E grit 240
1 x	Sanding pads for OZI 220/E grit 150
1 x	surface planing and thicknessing ADH 250
1 x	Snipe nose pliers 45º EUROline-Conductive
2 x	Precision lathe PD 250/E
1 x	Three-jaw steel drill chuck
1 x	HSS immersion saw blades for OZI
1 x	Table Sawr TKS 315 E
1 x	ESD Tweezers 5-192
1 x	TU 2004V
1 x	Polishing Set
1 x	6-piece set of ESD/EGB tweezers
1 x	Special Fused Alumina (Hardness N).
1 x	ESD-handling set
1 x	Grinding mop cylinder grit 120
1 x	ESD Tweezers 5-191
1 x	Silicon-Carbide.
1 x	ESD Tweezers 5-193
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	TU 1503V
1 x	Table Saw TKS 2500 SC
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	ESD Tweezers 5-195
1 x	Conj 5 pinças ESD
1 x	ESD Tweezers 5-194
1 x	TU 2404
1 x	ESD-handling ser 9-361
1 x	Glass fibre contact cleaner brush
1 x	Edge cutter with pin 6.4mm
2 x	MICRO Miller FF 230
1 x	sandpaper for PS 13 Grit 400
1 x	sanding belts for BBS/s Grit 80
1 x	MICROMOT 50/E
1 x	MICROMOT 230/E
1 x	Hand magnifier with LED light 3X
1 x	Mill/Drill System BFW 40/E
2 x	MICRO Miller FF 500
1 x	Slot cutter 5.0mm
1 x	sanding belts for BBS/s Grit 240
1 x	Blade for Wood and Plastics
1 x	MICROMOT Mains Adapter NG 5/E
1 x	sandpaper for PS 13 Grot 180
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Multiform grindstone
2 x	MICRO Miller MF 70
1 x	Bench drill machine TBM 220
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Slot cutter 6.5mm
1 x	MICROMOT 50
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Half round cutter 13mm
1 x	6-piece wrench key set ESD
1 x	Diamond-coated cutting disc for MIC
1 x	Diamond blade for MBS 240/E
1 x	sandpaper for PS 13 Grit 240
1 x	Rebating cutter 6.4mm
1 x	Blade for Steel and brass
1 x	Combi cutter 6.5/2.5mm
1 x	Slot cutter 3.2mm
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	6-piece socket wrenches ESD
1 x	V-slot cutter 6.5mm
1 x	10-piece wood router cutter set
1 x	Plastic magnifying glass
1 x	Rounding over cutter 6.4mm
1 x	6-piece TORX-screwdriver-set ESD
1 x	Blade guides separately
1 x	Professional Drill/Grinder IBS/E
1 x	Hand Magnifier 2-293
1 x	Bench drill press TBH
1 x	Replacement carving blades for MSG
1 x	Precision drill grinder FBS 12/EF

€23,963.98

Quick Find

We Accept

Manufacturer Info


-	Elnec Homepage
-	Other products

What's New?

Super-fine sanding discs grain 000
€3.82

Languages

Share Product

€859.00 + VAT

Beeprog2C[60-0059]

Beeprog2C
[60-0059]