Top » Catalog » Programmers and acessories » Socket converters » Converters » DIL/BGA » 70-0245/0242

€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
    Converters->
      DIL/BGA
      DIL/LQFP
      DIL/MLF
      DIL/MQFP
      DIL/PLCC
      DIL/PQFP
      DIL/PSOP
      DIL/QFN
      DIL/QFP
      DIL/QSOP
      DIL/SDIP
      DIL/SOIC
      DIL/SOT
      DIL/SSOP
      DIL/TQFP
      DIL/TSOP
      DIL/TSSOP
      DIL/VQFP
    submodule
  Universal programmers
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	DIL40/TQFP64 ZIF AVRmega-2
2 x	DIL40/TQFP44 ZIF EM652X
3 x	DIL44/TQFP44-3 ZIF
3 x	DIL40/TQFP44 ZIF PIC-1
3 x	DIL48/TQFP64 ZIF HC908-1
3 x	DIL40/TQFP80-1 ZIF AWM-1
2 x	DIL44/TQFP44-2 ZIF
3 x	DIL48/TQFP100-2 ZIF PLD-1
2 x	DIL40/TQFP64 ZIF CC-1
2 x	DIL48/TQFP48-1 ZIF
3 x	DIL40/TQFP80-1 ZIF PIC-1A
3 x	DIL40/TQFP44-1 ZIF MCS51
3 x	DIL40/TQFP44 ZIF AWM-1
2 x	DIL48/TQFP144 ZIF ST10-1
3 x	DIL40/TQFP64 ZIF EM652X
2 x	DIL48/TQFP100 ZIF ST92Fxxx
3 x	DIL40/TQFP64 ZIF PIC-1A
2 x	DIL44/TQFP44-1 Zif
2 x	ESD Brushe
1 x	RT200 - Horizontal-vertical circular dividing table
3 x	Backing disc for LWS
1 x	IT 200 - Indirect dividing attachment
1 x	BeeHive204
1 x	BGA-Bottom-1
2 x	BGA-Bottom-106
2 x	BGA-0245/0241
1 x	Professional set for finish grinding and polishing
1 x	RT100 - Horizontal-vertical circular dividing table
1 x	BGA-Bottom-108
1 x	Warding files set, 6pcs
1 x	Super-fine sanding discs grain 000
3 x	BGA-0245/0242
2 x	BGA-0246/0243
1 x	OPTI BF20 VARIO
2 x	BGA-Bottom-105
1 x	Microfibre cloth
1 x	BGA-Bottom-11
2 x	ESD Brushe
2 x	BGA-Bottom-101
2 x	BGA-0246/0244
2 x	BGA-Bottom-10
1 x	BeeHive208S
1 x	Beeprog2C
1 x	IT 150 - Indirect dividing attachment
1 x	RT150 - Horizontal-vertical circular dividing table
1 x	Super-fine sanding discs grain 2000
1 x	Super-fine sanding discs grain 400
3 x	BGA-Bottom-115
1 x	Replacement glue sticks for HKP 220
2 x	BGA-0245/0243
1 x	Professional polishing sponge
1 x	BeeProg2
1 x	BGA-Bottom-215
1 x	TORX-screwdrivers T15
1 x	TORX-screwdrivers T20
1 x	Bottom PSOP44 NOR-2
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Band knife of hardened spring band steel (without teeth)
1 x	BGA-Bottom-201
2 x	DIL42/SDIP42 ZIF 600mil
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Multiform grindstone
2 x	Micro Compound Table KT 70
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
2 x	Corundum fan sander for LWS
1 x	BGA-Bottom-212
2 x	DIL48/SSOP70 ZIF OKI-1
1 x	BGA-Bottom-199
1 x	BGA-Bottom-207
2 x	14-piece parallel supports set
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x	Belt sander BBS/S
2 x	DIL40/SDIP52 ZIF 55x
1 x	BGA-Bottom-218
1 x	TORX-screwdrivers T8
1 x	Diamond-coated cutting disc for MIC
1 x	DIL48/PQFP100 ZIF ST10-1
1 x	BGA-Bottom-216
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	TORX-screwdrivers T10
1 x	Ball shaped milling cutters
1 x	BGA-Bottom-20
1 x	TORX-screwdrivers T4
1 x	DIL34/SSOP34 ZIF 200 mil
1 x	End mill for aluminium 6mm
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	DIL48/SSOP90 ZIF Flash-1
1 x	BGA-Bottom-102
1 x	TORX-screwdrivers T9
1 x	Bench Circular Saw KS 230
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
2 x	DIL48/PQFP100 ZIF PLD-1
1 x	Belt sander BS/E
3 x	DIL24/QSOP24 ZIF 150mil
1 x	BGA-Bottom-198
1 x	TORX-screwdrivers T10
2 x	DIL48/SSOP56 ZIF Flash-2
1 x	Ball-shaped diamond coated 3.2mm
1 x	DIL44/PSOP44 ZIF 600 mil
1 x	BGA-Bottom-208
1 x	BGA-Bottom-21
1 x	TORX-screwdrivers T7
1 x	Replacement cutting disc for MICRO cutter MIC
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x	Aluminium Die-Cast
1 x	BGA-Bottom-217
1 x	BGA-Bottom-214
1 x	BGA-Bottom-118
1 x	TORX-screwdrivers T5
1 x	TORX-screwdrivers T6
1 x	Blade for Steel and brass
1 x	Angle polisher WP/E
1 x	BGA-Bottom-202
1 x	BGA-Bottom-2
1 x	Bandsaw blade of bimetal for MBS 240/E
2 x	DIL48/SSOP56 ZIF Flash-1
2 x	DIL32/SDIP64 ZIF H8-1
1 x	End mill for aluminium 3mm
1 x	DIL34/SSOP34-1 ZIF-CS
1 x	BGA-Bottom-204
1 x	DIL32/SDIP64-1 ZIF Toshiba-BM1136
1 x	BGA-Bottom-209
1 x	Blade holders for DS 460
1 x	2-speed scroll saw DSH
1 x	End mill for aluminium 4mm
1 x	Chuck for TBM 220
1 x	BGA-Bottom-196
1 x
1 x	DIL48/SSOP48 ZIF 300mil
1 x	BGA-Bottom-103
1 x	Top PSOP44 ZIF 600mil
1 x	Coarse-toothed (18 TPI per 25mm)
2 x	Tungstein carbide rasp - and cutting disc
1 x	Ball-shaped diamond coated 1.2mm
1 x	BGA-Bottom-126
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Step clamps made of steel
1 x	MICROMOT steel collet set
1 x	Precision steel vice PM 40
1 x	Glass fibre contact cleaner brush
1 x	Sanding fleece for LWS
1 x	BGA-Bottom-16
1 x	Socket Wrenches 3.5
1 x	BGA-Bottom-180
1 x	BGA-Bottom-194
1 x	Corundum grinding disc for LWS
1 x	Mill/Drill Unit BFB 2000.
1 x	BGA-Bottom-195
1 x	MICROMOT Mains Adapter NG 2/S
1 x	BGA-Bottom-165
1 x	Socket Wrenches 2.0
1 x	BGA-Bottom-18
1 x	Machine Vice MS 4
1 x	Socket Wrenches 5.0
1 x	BGA-Bottom-166
1 x	BGA-Bottom-191
1 x	Handy 1515
1 x	MICROMOT Mains Adapter NG 5/E
1 x	MICROMOT drill stand MB 200
1 x	Flexishaft MICROMOT 110/P
1 x	BGA-Bottom-177
1 x	Socket Wrenches 3.0
1 x	Corundum bound cutting disc for LWS
1 x	Socket Wrenches 5.5
1 x	Corundum sanding discs for LWS
1 x	Socket Wrenches 4.0
1 x	BGA-Bottom-187
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Corundum fan sander for LWS
1 x	Diamond-coated cutting and roughing disc
1 x	Footswitch FS
1 x	Socket Wrenches 1.5
1 x	Protective device for hand-operated MICROMOT
1 x	BGA-Bottom-174
1 x	BGA-Bottom-173
1 x	BGA-Bottom-170
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	Socket Wrenches 3.2
1 x	Socket Wrenches 4.5
1 x	DIL24/TSSOP24 ZIF 170mil
1 x	SmartProg2
1 x	BGA-Bottom-192
1 x	BGA-Bottom-169
1 x	BGA-Bottom-164
1 x	MICRO Miller FF 230
1 x	Flexishaft MICROMOT 110/BF
1 x	Glass fibre contact cleaner brush
1 x	Brass contact cleaner brush
1 x	BGA-Bottom-171
1 x	MICROMOT extension cord. 300cm.
1 x	Dividing attachment TA 230 for PF 250
1 x	Table Saw TKS 2500 SC
1 x	Three-jaw steel drill chuck
1 x	BGA-Bottom-167
1 x	DIL40/TSOP40 ZIF 18.4mm
1 x	surface planing and thicknessing ADH 250
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
1 x	Milling cutter set (6 - 10mm)
1 x	BGA-Top-3 ZIF-CS
1 x	ESD Tweezers 5-191
1 x	ESD Tweezers 5-193
1 x	Fixed Steady
1 x	BGA-Top-5 ZIF-CS
1 x	ESD Tweezers 5-195
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x	DIL48/TSOP48 ZIF 18.4mm
1 x	ESD-handling set
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-6

€48,391.62