1 x | TORX-screwdrivers T10 |
1 x | Grinding mop cylinder grit 240 |
1 x | TORX-screwdrivers T15 |
1 x | DIL48/SSOP56 ZIF Flash-2 |
3 x | Flexishaft MICROMOT 110/BF |
4 x | Protective device for hand-operated MICROMOT |
5 x | Five piece HSS chisel set |
1 x | DIL48/SSOP48 ZIF 300mil |
1 x | MICROMOT extension cord. 300cm. |
1 x | DIL48/SSOP70 ZIF OKI-1 |
2 x | Mill/Drill Unit BFB 2000. |
2 x | MICROMOT tool holder |
5 x | Chuck for TBM 220 |
3 x | 14-piece parallel supports set |
1 x | MICROMOT drill stand MB 200 |
1 x | DIL28/TSSOP28 ZIF 170mil |
3 x | Three-jaw steel drill chuck |
1 x | DIL8/SSOP8 ZIF 120mil |
1 x | DIL44/SSOP44 ZIF 240mil |
2 x | Aluminium Die-Cast |
2 x | Micro Compound Table KT 70 |
2 x | HSS cutting blade for OZI |
1 x | Socket Wrenches 4.0 |
2 x | 6-piece screwdriver set ESD |
1 x | Socket Wrenches 5.0 |
1 x | Socket Wrenches 3.2 |
1 x | Snipe nose pliers 45º EUROline-Conductive |
2 x | HSS immersion saw blades for OZI |
1 x | 6-piece TORX-screwdriver-set ESD |
1 x | Socket Wrenches 4.5 |
1 x | Socket Wrenches 3.5 |
3 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
1 x | Socket Wrenches 3.0 |
1 x | Socket Wrenches 2.5 |
1 x | ACCENT SERVICE TOOLS SET |
2 x | STRIPPING TOOL WITH ADJUSTABLE KNIVES |
1 x | Snipe nose pliers 45º EUROline-Conductive |
1 x | Snipe nose pliers 45º EUROline-Conductive |
1 x | Socket Wrenches 2.0 |
1 x | Multipurpose Vices Primus100 |
1 x | Socket Wrenches 1.5 |
3 x | MICROMOT steel collet set |
2 x | Footswitch FS |
2 x | Grinding mop cylinder grit 80 |
2 x | Machine Vice MS 4 |
3 x | Dividing attachment TA 230 for PF 250 |
2 x | Flexishaft MICROMOT 110/P |
1 x | DIL48/SOIC24 ZIF MB95-1 |
2 x | Conj 5 pinças ESD |
1 x | ESD-handling ser 9-361 |
2 x | Felt cloth polishing disc (100 x 15mm) |
1 x | 6-piece socket wrenches ESD |
1 x | DIL48/SOIC20 ZIF LPC-1 |
3 x | Independent four jaw chuck for the DB 250 |
1 x | ESD Brushe |
1 x | DIL8/SOIC8 ZIF MB95-1 |
1 x | ESD Brushe |
4 x | Drill chuck with sliding sleeve for the tailstock |
1 x | DIL8W/SOIC8 ZIF 150mil |
1 x | DIL8/SOIC8-1 ZIF 170mil |
1 x | ESD-handling set |
1 x | EUROline-Conductive set of pliers |
1 x | ESD Tweezers 5-193 |
1 x | ESD Tweezers For The SMD-Technique - 6 Piece Set |
3 x | Three jaw chuck for the lathe DB 250 |
1 x | ESD Tweezers 5-191 |
1 x | DIL8/SOT23-6 ZIF-CS PIC |
1 x | DIL8/SOIC8 ZIF 200mil |
1 x | DIL8/SOIC8 ZIF 150mil |
1 x | ESD Tweezers 5-195 |
2 x | End side cutters EUROline-Conductive |
1 x | ESD Tweezers 5-192 |
1 x | MICROMOT 50/E |
1 x | Precision Drill/Grinder FBS 240/E |
1 x | Long neck angle grinder LHW |
3 x | Cutting tools of high quality cobalt HSS steel, ground |
2 x | Delta sander OZI/E |
1 x | MICRO Miller FF 230 |
3 x | DIL40/PLCC68 ZIF DS87C550 |
4 x | Centre Turning Attachment |
1 x | Blade guides separately |
1 x | Long neck angle milling/drilling unit LWB 220/E |
2 x | DIL40/PLCC52 ZIF AWM-1 |
2 x | Blade holders for DS 460 |
1 x | MICROMOT 230/E |
3 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
3 x | Cutting tools of high quality cobalt HSS steel, ground |
3 x | Bench drill machine TBM 220 |
2 x | DIL32/PLCC32 ZIF-CS NOR-1 |
2 x | Precision lathe PD 250/E |
3 x | DIL40/PLCC68 ZIF AWM-1 |
2 x | sanding belts for BBS/s Grit 240 |
3 x | DIL40/PLCC28 ZIF AWM-1 |
1 x | MICROMOT 50 |
4 x | DIL32/PLCC32 ZIF |
3 x | Four Jaw Chuck |
2 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
3 x | DIL28/PLCC28 ZIF |
2 x | Rebating cutter 6.4mm |
1 x | Cone shaped milling cutter |
1 x | Super-fine sanding discs grain 000 |
1 x | MICRO Miller MF 70 |
1 x | Blade for Wood and Plastics |
2 x | Combi cutter 6.5/2.5mm |
3 x | Hot wire cutter THERMOCUT 230/E |
3 x | DIL32/PLCC32 ZIF-CS |
1 x | Mill/Drill System BFW 40/E |
3 x | Collet Set for accurate use on round components |
3 x | DIL20W/PLCC20 ZIF |
1 x | Coarse-toothed (25 TPI per 25mm) |
1 x | Lathe System PD 400 |
1 x | Complete Engraving Kit with trial glass |
2 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
3 x | HSS boring tool set, 6 pieces |
2 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
3 x | Bench drill press TBH |
1 x | MICRO Miller FF 500 |
2 x | Bottom PSOP44 NOR-3 |
3 x | DIL28/PLCC84 ZIF HS538ESC01H |
3 x | DIL20/PLCC20 ZIF-CS |
2 x | Tool holder for rotary tools |
3 x | DIL40/PLCC52 ZIF DS87C530 |
3 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
3 x | MICRO cutter MIC |
3 x | DIL48/SDIP56 ZIF 68HC05Bx |
2 x | DIL40/SDIP52 ZIF 55x |
2 x | Fine dust paper filter for CW-matic |
1 x | Felt polishers |
1 x | HSS drill bits 0.5mm |
3 x | DIL32/SDIP64 ZIF H8-1 |
1 x | Cotton polishers |
2 x | Crosscut 'Super-Cut' blade |
2 x | Belt sander BBS/S |
1 x | HSS drill bits 1.0mm |
1 x | Metal Cutting Blades |
2 x | sanding belts for BBS/s Grit 150 |
1 x | Fibre-Cut Discs |
2 x | sanding belts for BBS/s Grit 80 |
2 x | Corundum grinding disc for LWS |
2 x | Diamond Twist Drills |
1 x | Cups brushes |
1 x | Felt polishers |
3 x | Screwdriver bit set. 49-piece. |
1 x | Cotton polishers |
1 x | Tungsten carbide drills Ø1,5mm |
2 x | Cutting disc, with reinforcement |
1 x | Felt polishers |
3 x | Motor-driven carving device MSG |
2 x | Jig saw STS 12/E |
2 x | Corundum grinding disc for LWS |
1 x | Extra narrow bandsaw blade (3.5mm) for tight radii |
1 x | Fibre-Cut Discs |
3 x | MICRO shaper MP 400 |
1 x | Cotton polishers |
2 x | Fluted filter for CW-matic |
2 x | Surface planer AH 80 |
2 x | Cut off/mitre saw KGS 80 |
3 x | Fixed Steady |
2 x | Fibre-Cut Discs |
4 x | Backing disc for LWS |
2 x | Engraving tool GG |
2 x | Radius Cutting Attachment, complete with pointed tool |
3 x | DIL32/SDIP32 ZIF 400mil |
3 x | MICRO Band Saw MBS 240/E |
3 x | 2-speed scroll saw DSH |
1 x | High quality corundum grinding bits |
1 x | Cylinder shaped milling cutters |
1 x | Conjunto de três brocas de ponto |
2 x | Table Saw FET |
2 x | Super jig saw STS/E |
2 x | Core box bit 3.2mm |
1 x | Flame shaped milling cutters |
1 x | Felt polishers |
1 x | Tungsten carbide drills Ø2mm |
2 x | Thicknesser DH 40 |
1 x | Sanding Discs |
4 x | Corundum sanding discs for LWS |
4 x | MICROMOT Mains Adapter NG 5/E |
1 x | Bandsaw blade of bimetal for MBS 240/E |
1 x | Crimping plier for BNC |
1 x | DIL48/QFP144 ZIF PLD-2 |
1 x | DIL48/QFP100-1 ZIF NEC-3 |
1 x | DIL48/QFP64 ZIF 68HC-1 |
3 x | DIL48/QFP100 ZIF PLD-4 |
1 x | DIL48/QFP120 ZIF-CS HD64F-1 |
2 x | Precision steel vice PM 40 |
1 x | CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C |
3 x | DIL48/QFP100 ZIF PLD-3 |
3 x | Self-adhesive silicone film for easy sanding disc replacement |
1 x | DIL48/QFP64 ZIF MSP430-1 |
2 x | DIL40/PLCC44 ZIF PIC-1 |
2 x | DIL28/PLCC28 ZIF-CS |
2 x | DIL48/QFP100 ZIF PLD-1 |
2 x | Angle polisher WP/E |
3 x | DIL28/QFP52 ZIF-CS SX52 |
1 x | DIL48/QFP80 ZIF-CS Z8F-1 |
3 x | DIL32/QFP64 ZIF H8-1 |
2 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
1 x | DIL48/QFP80 ZIF HCS12-1 |
3 x | Replacement belts for BSL 220/E |
1 x | Ball shaped milling cutters |
1 x | Contact bracelet with spiral cord |
3 x | DIL48/QFP100 ZIF NEC-1 |
1 x | CRIMPING PLIERS/WIRE STRIPPER |
1 x | DIL40/QFP64-3 ZIF NEC-1 |
2 x | sandpaper for PS 13 Grot 180 |
2 x | DIL40/QFP64-1 ZIF-CS NEC-1 |
1 x | Lambswool polishing disc |
3 x | DIL40/QFP64-4 ZIF NEC-1 |
2 x | Bench Circular Saw KS 230 |
1 x | DIL48/QFP208 ZIF PLD-1 |
2 x | DIL40/QFP64 ZIF LPC-1 |
3 x | Supercut jig saw blades of special steel |
2 x | Belt sander BS/E |
1 x | DIL48/QFP100-2 ZIF M16C/62-1 |
3 x | Self-adhesive white corundum sanding discs for TG 250/E |
2 x | Ball-shaped diamond coated 2.2mm |
2 x | 10-piece wood router cutter set |
1 x | DIL48/QFP144 ZIF PLD-1 |
1 x | Ball-shaped diamond coated 3.2mm |
1 x | DIL48/QFP100 ZIF PLD-2 |
1 x | DIL48/QFP64 ZIF PLD-1 |
2 x | Self-adhesive white corundum sanding discs for TG 250/E |
2 x | DIL40/QFP144 ZIF LPC-1 |
1 x | DIL48/QFP144 ZIF H8S-2 |
1 x | Ball-shaped diamond coated 1.2mm |
1 x | DIL48/QFP112 ZIF HCS12-1 |
1 x | DIL48/QFP64 ZIF HD64-1 |
2 x | DIL40/PLCC44 ZIF W-EPROM / MCS51 |
3 x | DIL40/QFP64-2 ZIF-CS NEC-1 |
2 x | Angle cutter 45 ° |
3 x | DIL48/QFP100 ZIF NEC-2 |
1 x | Sanding pads for OZI 220/E grit 80 |
3 x | Step clamps made of steel |
1 x | DIL48/QFP100-1 ZIF M16C/62-1 |
1 x | DIL48/QFP80-1 ZIF HC908-1 |
2 x | DIL48/QFP100 ZIF MB90F-1 |
1 x | DIL48/QFP144 ZIF H8S-3 |
2 x | Band knife of hardened spring band steel (without teeth) |
2 x | DIL40/QFP144 ZIF H8S-1 |
1 x | DIL48/PLCC84 ZIF PLD-4 |
2 x | Self-adhesive silicone carbide sanding discs for TSG 250/E |
2 x | DIL40/QFP100 ZIF AVR-1 |
1 x | Diamond Cutting Discs |
1 x | Multipurpose Vices Primus 75 |
2 x | High quality corundum grinding bits |
1 x | Grinding mop cylinder grit 120 |
1 x | Diamond Cutting Discs |
1 x | Pensander PS 13 |
1 x | Diamond blade for MBS 240/E |
1 x | DIL40/PLCC44 ZIF AWM-1 |
1 x | DIL32/PLCC84 ZIF HS3334ESCF1H |
4 x | Diamond-coated cutting disc for MIC |
1 x | Precision Vice FMS 75 |
1 x | Diamond Grinding Bits 1mm |
1 x | Replacement carving blades for MSG |
1 x | DIL28/PLCC32 ZIF EPROM |
1 x | Grinding mop cylinder grit 120 |
1 x | Disc cutters |
1 x | Tungsten carbide cutters set |
3 x | Replacement cutting disc for MICRO cutter MIC |
2 x | Flexible polishing pad set |
3 x | Replacement cutting wire for the THERMOCUT 12/E |
1 x | Diamond Grinding Bits 1,8mm |
1 x | Flexible silicon discs |
1 x | |
1 x | Flexible silicon discs |
1 x | Diamond Grinding Bits 1,8mm |
1 x | Cylindrical cutters |
1 x | MICROMOT Mains Adapter NG 2/S |
1 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
1 x | Sanding pads for OZI 220/E grit 150 |
2 x | V-slot cutter 6.5mm |
2 x | Replacement glue sticks for HKP 220 |
1 x | Diamond blade |
2 x | Flexible polishing pad set |
3 x | Half round cutter 13mm |
1 x | Fibre-Cut Discs |
1 x | High quality corundum grinding bits |
1 x | Diamond Cutting Discs |
1 x | Diamond Grinding Bits 5mm |
1 x | Flap Wheels |
1 x | DIL42/SDIP42 ZIF 600mil |
1 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
1 x | High quality corundum grinding bits |
1 x | Grinding and Polishing Machine SP/E |
1 x | Tungsten tipped saw blade |
2 x | Diamond-coated cutting and roughing disc |
1 x | Disc Sander TG 125/E |
1 x | Disc Sander TG 250/E |
3 x | Flap Wheels |
1 x | Milling cutter set (6 - 10mm) |
1 x | HSS twist drill set with centring pin |
1 x | High quality corundum grinding bits |
1 x | DIL28/QFP64 ZIF H8/3644 |
1 x | DIL32/SDIP64-1 ZIF Toshiba-BM1136 |
1 x | Fibre-Cut Discs |
3 x | Tungsten Carbide Tipped (TCT) |
3 x | Universal and oil siphoning pump AP 12 |
2 x | Super-Cut |
2 x | Replacement belts for BSL 220/E |
2 x | Hot wire cutter THERMOCUT 12/E |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
3 x | Replacement belts for BSL 220/E |
2 x | Super safety and specialty bit set, 75-piece |
1 x | Glass fibre contact cleaner brush |
1 x | MICROMOT Mains Adapter NG 2/E |
2 x | Replacement belts for BSL 220/E |
2 x | sandpaper for PS 13 Grit 240 |
1 x | Corundum fan sander for LWS |
1 x | Sanding fleece for LWS |
1 x | Rounding over cutter 6.4mm |
1 x | Sanding fleece for LWS |
2 x | Tungstein carbide rasp - and cutting disc |
1 x | Diamond Coated |
1 x | Hot wire cutter THERMOCUT 650 |
2 x | Slot cutter 6.5mm |
1 x | Edge cutter with pin 6.4mm |
1 x | Corundum fan sander for LWS |
1 x | Slot cutter 5.0mm |
1 x | Slot cutter 3.2mm |
1 x | PLCC Puller |
1 x | Saw blade made of high-alloy special steel |
1 x | Gear Chuck |
1 x | sandpaper for PS 13 Grit 400 |
1 x | Jig saw blades made of HSS |
1 x | MICROMOT glue gun HKP 220 |
|
€50,718.91 |