€27.23 + VAT

MICROMOT 50
[28500]

MICROMOT 50

Tested 100,000 times, these units speak for themselves.

The body diameter of only 35 mm makes it easy to handle. The weight of 230 g, quiet and effortless drive are due to the special motor. The ground spindle and collar bearing all contribute to the ergonomic design. The high quality steel collets ensure accurate clamping of the cutters. The size of the machine dictates a 12 V drive system, use of a transformer is required. MICROMOT transformers of at least 1 A are recommended.

Milling/Drilling machine MICROMOT 50

The MICROMOT standard 20mm collar allows use in the drill stand MB 140/S, router base OFV, stand UH 34 and angle adapter WS 90.Stable housing of fibreglass reinforced POLYAMIDE. With soft gripping area for extended use during hours.

  • For milling, drilling, routing, de-scaling, polishing, cutting, cleaning, sawing, engraving and more.
  • Useable on any workable material, e.g. steel, precious metals, glass, ceramics, plastics, precious stones etc.
  • Ideal for electronic hobbyists, model builders, tool and die makers, jewellers, opticians, artists, chiropractors, dental technicians and more.
  • 12 V supply allows the safe use of coolant, e.g. when grinding and cutting semi-precious stones!

 .

Six MICROMOT collets for shanks in the range 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2 mm are supplied.

 

Spec.

  • Power consumption is 40 W
  • length 220 mm
  • weight approx. 230 g.
  • body diameter of only 35 mm
  • standard 20mm collar
  • Stable housing of fibreglass reinforced POLYAMIDE

Sold without power supply


Reviews

Customers who bought this product also purchased
Tool holder for rotary tools
Tool holder for rotary tools
Manufacturers
1 x 3-jaw chuck centrically clamping 125mm
2 x Broca de alta duração de 1.2mm
2 x Broca de alta duração de 0.9mm
1 x Precision quick-action drill chuck 0-10mm B16
1 x Morse taper MT3 - B16
1 x 4-jaw chuck individually clamping 100mm
1 x 4-jaw chuck individually clamping 125mm
1 x Dial gauge
2 x broca de alta duração de 0,2mm
1 x Broca de alta duração de 0.5mm
1 x Precision quick-action drill chuck 0-10mm B16
2 x Broca de alta duração de 1.3mm
1 x centrically clamping 100mm
2 x Broca de alta duração de 0.3mm
1 x Broca de alta duração de 1.4mm
2 x Broca de alta duração de 1.1mm
1 x sanding belts for BBS/s Grit 240
1 x Polishing felt, medium hard
1 x centrically clamping 125mm
2 x Broca de alta duração de 0.8mm
1 x Precision quick-action drill chuck 0-13mm B16
1 x Broca de alta duração de 0.4mm
1 x 3-jaw chuck centrically clamping 100mm
1 x CM2 - B16 - M10
2 x broca de alta duração de 0,6mm
1 x 4-jaw chuck individually clamping 80mm
2 x Broca de alta duração de 2.2mm
2 x Broca de alta duração de 2.1mm
2 x Broca de alta duração de 2.3mm
1 x Precision quick-action drill chuck 0-8mm B16
1 x Precision quick-action drill chuck 0-16mm B16
1 x 3-jaw chuck centrically clamping 160mm
2 x Broca de alta duração de 2.0mm
1 x Precision magnetic gauge stand
2 x Broca de alta duração de 1.5mm
2 x Broca de alta duração de 2.4mm
3 x Broca de alta duração de 0.7mm
1 x 3-jaw chuck centrically clamping 80mm
2 x Independent four jaw chuck for the DB 250
2 x Broca de alta duração de 1.0mm
1 x Morse taper MT2 - B16
2 x Broca de alta duração de 2.5mm
1 x Conjunto de três brocas de ponto
1 x Broca de ponto 6.30 x 2.50
1 x Broca de ponto 5.00 x 2.00
1 x Broca de ponto 3.15 x 1.25
1 x Broca de ponto 3.15 x 1.00
1 x MICROMOT 50
1 x Broca de ponto 8.00 x 3.15
1 x Three jaw chuck for the lathe DB 250
1 x Five piece HSS chisel set
1 x Drill chuck with sliding sleeve for the tailstock
1 x Cross-recess Screwdrivers Pozidriv 2
1 x Screwdriver 3.0
1 x Cross-recess Screwdrivers Pozidriv 1
1 x Hot wire cutter THERMOCUT 650
1 x Screwdriver 5.5
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Screwdriver 2.5
1 x CRIMPING PLIERS/WIRE STRIPPER
1 x Screwdriver 4.0
1 x Screwdriver 5.5
1 x DIL32/PLCC32 ZIF
1 x DIL48/QFP80-1 ZIF MCS51-1
1 x DIL48/SSOP56 ZIF Flash-1
1 x DIL48/QFP120 ZIF-CS HD64F-1
1 x DIL32/MLF32-1 ZIF
1 x DIL48/QFP100-1 ZIF M16C/62-1
1 x Corundum grinding disc for LWS
1 x DIL48/SSOP48 ZIF 300mil
1 x DIL44/SSOP44 ZIF 240mil
1 x DIL34/SSOP34 ZIF 200 mil
1 x DIL28/TSSOP28 ZIF 170mil
1 x DIL48/QFP80-1 ZIF HC908-1
1 x DIL48/MQFP80 ZIF C500
1 x DIL40/MLF64 ZIF-CS AVR-1
1 x DIL28/QFN28-2 ZIF-CS
1 x DIL48/QFP64-1 ZIF-CS NEC78K-1
1 x DIL48/QFP80 ZIF HCS12-1
1 x MICROMOT 50/EF
1 x Tungsten tipped saw blade
1 x Multiform grindstone
1 x DIL40/VQFP64 ZIF AWM-1
1 x DIL48/QFP64 ZIF 68HC-2
1 x DIL48/QFN48 ZIF-CS
€6,016.63
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
PROXXON
PROXXON Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook