Top » Catalog » Programmers and acessories » Universal programmers » 60-0052

€999.00 + VAT

BeeProg2
[60-0052]

Very fast universal USB/LPT interfaced programmer.

If you're looking for lower price universal programmer, please take a look at BeeProg2C programmer.

Short description:

supported devices from manufactures
extremely fast programming, one of the fastest programmers in this category. Sustainable programming speed greater than 5 MBytes per second. Programs 2 GB eMMC NAND Flash in less than 365 sec.
48-pins powerful pindrivers, no adapter required for any DIL devices
ISP connector for in-circuit programming
connection to PC: USB 2.0 (up to 480 Mbit/s, high speed/full speed) and 1.1 compatible interface
after upgrade to BeeProg2, also high-speed IEEE 1284 (ECP/EPP) printer-port (LPT) interface is available
comfortable and easy to use control program, works with all versions of MS Windows from Windows XP to Windows 10 (32-bit and 64-bit*)
unique quick reaction to customer's needs - software update can be ready within a day from request by OnDemand software
Multiprogramming possible by attaching more programmers to one PC
made in Slovakia
warranty - 3 years

More Information here: http://www.elnec.com/products/universal-programmers/beeprog2/

Reviews

Shopping Cart

1 x	Multipurpose Vices Primus100
1 x	Hot wire cutter THERMOCUT 230/E
1 x	Precision Vice FMZ
1 x	Precision Vice FMS 75
1 x	Polishing Set
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Replacement belts for BSL 220/E
2 x	Machine Vice MS 4
1 x	Diamond-coated cutting disc for MIC
1 x	Solid carbide saw blade
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	V-slot cutter 6.5mm
1 x	Blade holders for DS 460
1 x	Edge cutter with pin 6.4mm
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Replacement belts for BSL 220/E
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Lathe System PD 400
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Rebating cutter 6.4mm
1 x	Coarse-toothed (10 TPI per 25mm)
2 x	Precision steel vice PM 40
1 x	Slot cutter 5.0mm
1 x	Diamond blade
1 x	Special Fused Alumina (Hardness N).
1 x	Half round cutter 13mm
1 x	Angle cutter 45 °
1 x	Slot cutter 6.5mm
1 x	Three piece thread cutting set
1 x	Step clamps made of steel
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Replacement belts for BSL 220/E
1 x	10-piece wood router cutter set
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Slot cutter 3.2mm
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Tungsten carbide cutters set
1 x	Tungsten tipped saw blade
1 x	Saw blade made of high-alloy special steel
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Precision lathe PD 250/E
1 x	Combi cutter 6.5/2.5mm
1 x	Silicon-Carbide.
1 x	Core box bit 3.2mm
1 x	HSS boring tool set, 6 pieces
1 x	Rounding over cutter 6.4mm
1 x	Replacement belts for BSL 220/E
1 x	Hot wire cutter THERMOCUT 650
1 x	Multipurpose Vices Primus 75
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Crosscut 'Super-Cut' blade
1 x	Sanding pads for OZI 220/E grit 240
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Fine dust paper filter for CW-matic
1 x	Universal polishing paste
1 x	HSS immersion saw blades for OZI
1 x	Sanding pads for OZI 220/E grit 80
1 x	Supercut jig saw blades of special steel
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	sandpaper for PS 13 Grot 180
1 x	HSS cutting blade for OZI
1 x	sandpaper for PS 13 Grit 400
1 x	Footswitch FS
1 x	Jig saw blades made of HSS
1 x	Diamond cutting blade for OZI
1 x
1 x	sandpaper for PS 13 Grit 240
1 x	HSS immersion saw blades for OZI
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Sanding pads for OZI 220/E grit 150
1 x	Fluted filter for CW-matic
1 x	Spare cutting wire
1 x	Engraving tool GG
1 x	MICROFLAME burner MFB/E
1 x	Universal and oil siphoning pump AP 12
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Centre Turning Attachment
1 x	Three jaw chuck for the lathe DB 250
1 x	MICROMOT glue gun HKP 220
1 x	Fixed Steady
1 x	MICRO-screwdrivers
1 x	sanding belts for BBS/s Grit 80
1 x	Four Jaw Chuck
1 x	Universal holder UHZ
1 x	sanding belts for BBS/s Grit 150
1 x	Complete Engraving Kit with trial glass
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Independent four jaw chuck for the DB 250
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Screwdriver bit set. 49-piece.
1 x	Multiform grindstone
1 x	Tool holder for rotary tools

€4,977.97

Quick Find

We Accept

Manufacturer Info


-	Elnec Homepage
-	Other products

What's New?

Grinding mop cylinder grit 80
€8.33

Languages

Share Product

€999.00 + VAT

BeeProg2[60-0052]

BeeProg2
[60-0052]