€87.39 + VAT

Professional Drill/Grinder IBS/E
[28481]

Professional Drill/Grinder IBS/E

Professional Drill/Grinder IB/E

Usable for prolonged periods when drilling, milling, grinding, polishing, cleaning, cutting and even engraving.

Ideal for mechanics, model builders, jewellers, opticians and electronic enthusiasts and professionals.

High concentric accuracy (max. run out 3/100ths of a mm).

This high revving, special motor has full-wave electronic speed control. The ground steel spindle runs in a ball bearing, so minimising play. 6 high concentricity collets (1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2 mm and locking nut).

 

  1. Ball bearing spindle of ground steel with lock button for rapid cutter changing.
  2. Quality without compromise: isolation to class 2.
  3. Streamlined head of die cast aluminium for exact bearing seats and optimal stability.
  4. Quiet, powerful 100 W motor with full wave electronics for speeds between 5,000 and 20,000 rpm.
  5. Complete with six triple slit steel collets from 1.0 - 3.2 mm.

Technical Data:

  • 5,000 - 20,000 rpm
  • 220 - 240 V, 50/60 Hz
  • 100 W
  • Stable head of die-cast aluminium
  • main housing made of fibreglass reinforced POLYAMIDE
  • Length 230 mm
  • Weight 500 g
  • Insulation to class 2
  • With 20 mm MICROMOT system fitting at the front which allows use in our drill stand and clamps

 

Note:

MICROMOT steel collets are hardened and thus have a high, consistent flexibility. They also maintain prolonged accuracy, even after regular use (these collets should not be compared with unhardened four-slit collets of brass and aluminium). The triple slit collet is substantially more difficult to manufacture than the four-slit type, but offers a better load-bearing surface. This is especially important for cutters with small shank diameters.

Reviews

Manufacturers
3 x 3-jaw chuck centrically clamping 125mm
1 x Cross-recess Screwdrivers 1
2 x Tool holder type H for SWH 1-A
1 x Earth wire
2 x Collet chuck ER32 for D250X550
1 x Earth wire with dummy Schunko-plug
1 x Cross-recess Screwdrivers 2
1 x Cross-recess Screwdrivers 0
1 x Cross-recess Screwdrivers 1
1 x Earth wire
1 x Cross-recess Screwdrivers Pozidriv 2
2 x Lathe chuck flange for D250X550
1 x Crocodile clip
2 x Precision quick-action drill chuck 0-10mm B16
1 x Cross-recess Screwdrivers 000
1 x Earthing module
1 x Cross-recess Screwdrivers Pozidriv 1
2 x Cutting tool 10 mm
1 x Cross-recess Screwdrivers 2
2 x centrically clamping 125mm
2 x Precision quick-action drill chuck 0-13mm B16
2 x Lathe tools 10mm pastilhados
1 x Cross-recess Screwdrivers 00
2 x 6-piece screwdriver and cross-recess set ESD
1 x ESD Brushe
2 x 6-piece screwdriver set ESD
1 x ESD Tweezers 5-191
2 x ACCENT SERVICE TOOLS SET
2 x 6-piece TORX-screwdriver-set ESD
2 x 6-piece wrench key set ESD
1 x Precision magnetic gauge stand
2 x 6-piece socket wrenches ESD
2 x Brass contact cleaner brush
1 x ESD Tweezers 5-192
2 x BIT-SET
1 x Crimping plier for BNC
1 x ESD Tweezers 5-194
1 x ESD Tweezers 5-193
1 x ESD Brushe
2 x 6-piece set of ESD/EGB tweezers
1 x Contact bracelet with spiral cord
1 x ESD-handling ser 9-361
2 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x Conj 5 pinças ESD
1 x ESD-handling set
1 x ESD Tweezers 5-195
1 x ESD Tweezers For The SMD-Technique - 6 Piece Set
2 x CRIMPING PLIERS/WIRE STRIPPER
1 x Tool holder type D for SWH 1-A
1 x IC tweezers
1 x quantum revolving center CM2
1 x DIL32/PLCC32 ZIF
1 x Steady rest for D250X550
1 x Collet chuck ER25 for D250X550
3 x Mini side cutters EUROline-Conductive
1 x End side cutters EUROline-Conductive
1 x Inspector mirror
1 x Floor cover ESD
1 x End side cutters 45º EUROline-Conductive
1 x Broca de ponto 3.15 x 1.25
1 x machine base with shelves for D250X550
1 x Face clamping disc for D250X550
1 x Hand magnifier with LED light 3X
1 x Hand Magnifier 2-293
1 x Flat nose pliers 45º EUROline-Conductive
2 x Morse taper MT2 - B16
2 x Mini side cutters EUROline-Conductive
1 x Glass fibre contact cleaner brush
1 x EUROline-Conductive set of pliers
1 x Inpection mirror 1-978
1 x lathe tools 10mm
1 x Mini side cutters EUROline-Conductive
1 x magnifier 3.25 x Ø 45mm with additional lens
2 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
2 x Vacum SAA 901
2 x Insulation Resistance Tester MG500
1 x PLCC Puller
3 x Hot wire cutter THERMOCUT 230/E
1 x Engraving tool GG
3 x Hot wire cutter THERMOCUT 650
1 x MICROFLAME burner MFB/E
1 x Router base OFV
1 x Plastic magnifying glass
2 x Compact workshop vacuum cleaner CW-matic
2 x Insulation Resistance Tester MG125
1 x Round nose pliers 45º EUROline-Conductive
1 x Precision caliper square
1 x PLCC Extractor
2 x Self-adhesive white corundum sanding discs for TG 125/E
1 x PRECISION WIRE STRIPPER ESD-PLUS
1 x MICRO-screwdrivers
2 x MICROMOT glue gun HKP 220
1 x Table Saw FET
1 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x MICROFLAM gas soldering set MGS
1 x DIL24/QSOP24 ZIF 150mil
1 x Fibre-Cut Discs
2 x Diamond Cutting Discs
1 x MICRO Band Saw MBS 240/E
1 x DIL28/QFP64 ZIF H8/3644
2 x Diamond Cutting Discs
2 x Self-adhesive white corundum sanding discs for TG 125/E
2 x Fibre-Cut Discs
1 x MICROMOT Mains Adapter NG 5/E
2 x High quality corundum grinding bits
1 x Five piece HSS chisel set
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Fibre-Cut Discs
1 x DIL48/SOIC24 ZIF MB95-1
1 x DIL48/TSOP56 ZIF 18.4mm NOR-4
2 x Steel brushes
1 x High quality corundum grinding bits
1 x Fibre-Cut Discs
1 x MICROMOT Mains Adapter NG 2/E
1 x MICROMOT Mains Adapter NG 2/S
2 x Wood Lathe DB450
1 x Multipurpose Vices Primus 75
1 x DIL48/QFP100 ZIF MB90F-1
1 x Table Saw TKS 2500 SC
1 x High quality corundum grinding bits
1 x surface planing and thicknessing ADH 250
1 x DIL48/MQFP80 ZIF C500
1 x Table Sawr TKS 315 E
1 x surface planing and thicknessing ADH 200
1 x DIL40/QFP64-1 ZIF-CS NEC-1
1 x Wood Lathe DB900
€15,341.55
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
PROXXON
PROXXON Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook